ISO1050

現行

隔離式 5V CAN 收發器

立即訂購

產品規格表

document-pdfAcrobat ISO1050 Isolated CAN Transceiver datasheet (Rev. L) (英文) PDF | HTML

ISO1050

現行

產品規格表

立即訂購

產品詳細資料

Rating

Catalog

Isolation rating

Basic

Data rate (max) (Mbps)

1

Working isolation voltage (VIOWM) (Vrms)

400, 850

Surge isolation voltage (VIOSM) (VPK)

4000

Transient isolation voltage (VIOTM) (VPK)

4000

Withstand isolation voltage (VISO) (Vrms)

4243

CMTI (min) (kV/µs)

25

Bus fault voltage (V)

-27 to 40

Common-mode voltage (V)

-12 to 12

Operating temperature range (°C)

-55 to 105

Rating

Catalog

Isolation rating

Basic

Data rate (max) (Mbps)

1

Working isolation voltage (VIOWM) (Vrms)

400, 850

Surge isolation voltage (VIOSM) (VPK)

4000

Transient isolation voltage (VIOTM) (VPK)

4000

Withstand isolation voltage (VISO) (Vrms)

4243

CMTI (min) (kV/µs)

25

Bus fault voltage (V)

-27 to 40

Common-mode voltage (V)

-12 to 12

Operating temperature range (°C)

-55 to 105

SOIC (DW)

16

106.09 mm² 10.3 x 10.3

SOP (DUB)

8

98.8 mm² 9.5 x 10.4

Meets the requirements of ISO11898-2
5000-V RMS isolation (ISO1050DW)
2500-V RMS isolation (ISO1050DUB)
Fail-safe outputs
Low loop delay: 150 ns (typical), 210 ns (maximum)
50-kV/µs typical transient immunity
Bus-fault protection of –27 V to 40 V
Driver (TXD) dominant time-out function
I/O voltage range supports 3.3 V and 5 V microprocessors
Safety-related certifications
- VDE approval per DIN EN IEC 60747-17 (VDE 0884-17)
- UL 1577 approved
- CSA approved for IEC 61010-1, IEC 60601-1
- TUV Reinforced Insulation Approval for EN/UL/CSA 62368-1 (ISO1050DW-Only)
- CQC reinforced insulation per GB4943.1 (ISO1050DW-only)
- Typical 25-year life at rated working voltage (see application report SLLA197 and Life Expectancy vs Working Voltage)

Meets the requirements of ISO11898-2
5000-V RMS isolation (ISO1050DW)
2500-V RMS isolation (ISO1050DUB)
Fail-safe outputs
Low loop delay: 150 ns (typical), 210 ns (maximum)
50-kV/µs typical transient immunity
Bus-fault protection of –27 V to 40 V
Driver (TXD) dominant time-out function
I/O voltage range supports 3.3 V and 5 V microprocessors
Safety-related certifications
- VDE approval per DIN EN IEC 60747-17 (VDE 0884-17)
- UL 1577 approved
- CSA approved for IEC 61010-1, IEC 60601-1
- TUV Reinforced Insulation Approval for EN/UL/CSA 62368-1 (ISO1050DW-Only)
- CQC reinforced insulation per GB4943.1 (ISO1050DW-only)
- Typical 25-year life at rated working voltage (see application report SLLA197 and Life Expectancy vs Working Voltage)

The ISO1050 is a galvanically isolated CAN transceiver that meets the specifications of the ISO11898-2 standard. The device has the logic input and output buffers separated by a silicon oxide (SiO 2) insulation barrier that provides galvanic isolation of up to 5000 V RMS for ISO1050DW and 2500 V RMS for ISO1050DUB. Used in conjunction with isolated power supplies, the device prevents noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry.

As a CAN transceiver, the device provides differential transmit capability to the bus and differential receive capability to a CAN controller at signaling rates up to 1 megabit per second (Mbps). The device is designed for operation in especially harsh environments, and it features cross-wire, overvoltage and loss of ground protection from –27 V to 40 V and overtemperature shutdown, as well as –12V to 12V common-mode range.

The ISO1050 is characterized for operation over the ambient temperature range of –55°C to 105°C.

The ISO1050 is a galvanically isolated CAN transceiver that meets the specifications of the ISO11898-2 standard. The device has the logic input and output buffers separated by a silicon oxide (SiO 2) insulation barrier that provides galvanic isolation of up to 5000 V RMS for ISO1050DW and 2500 V RMS for ISO1050DUB. Used in conjunction with isolated power supplies, the device prevents noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry.

As a CAN transceiver, the device provides differential transmit capability to the bus and differential receive capability to a CAN controller at signaling rates up to 1 megabit per second (Mbps). The device is designed for operation in especially harsh environments, and it features cross-wire, overvoltage and loss of ground protection from –27 V to 40 V and overtemperature shutdown, as well as –12V to 12V common-mode range.

The ISO1050 is characterized for operation over the ambient temperature range of –55°C to 105°C.

filter

尋找其它隔離式 CAN 收發器

下載觀看有字幕稿的影片影片

您可能會感興趣的類似產品

open-in-new

比較替代產品

功能相同，但引腳輸出與所比較的裝置不同

ISO1042

現行

具 70-V 匯流排故障保及靈活資料速率的隔離式 CAN 收發器 5-kVrms isolated CAN transceiver with data rate up to 5-Mbps CAN FD, higher working voltage, better EMC protection and smaller package option (5.85mm x 7.85mm)

ISO1044

現行

採用小型封裝的隔離式 CAN FD 收發器 3-kVrms isolated CAN transceiver with data rate up to 5-Mbps CAN FD, 58-V bus fault protection and smallest package (4.90mm x 3.91mm)

技術文件

star

=TI 所選的此產品重要文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 18

	類型	標題		日期
*	Data sheet	ISO1050 Isolated CAN Transceiver datasheet (Rev. L)	PDF \| HTML	2023年 10月 3日
	Certificate	CSA Certificate for ISO1050 (Rev. A)		2025年 8月 20日
	Certificate	VDE Certificate for Basic Isolation for DIN EN IEC 60747-17 (Rev. Y)		2025年 8月 20日
	Certificate	CQC Certificate for ISO1050 (Rev. B)		2025年 8月 19日
	Certificate	TUV Certificate for ISO1050 (Rev. A)		2025年 8月 15日
	Application note	Top Design Questions About Isolated CAN Bus Design (Rev. B)	PDF \| HTML	2024年 10月 24日
	Application brief	Simplify the Design of Isolated CAN with Selective Wake ECUs	PDF \| HTML	2023年 4月 18日
	Product overview	Isolating a CAN Bus (Rev. A)	PDF \| HTML	2023年 1月 13日
	Application note	Isolated CAN Solution by Using ISO1050 and SN6501 (Rev. B)	PDF \| HTML	2022年 9月 22日
	Certificate	UL Certificate of Compliance File E181974 Vol 4 Sec 4		2022年 8月 8日
	Application brief	Isolate Your CAN Systems Without Compromising on Performance or Space (Rev. F)	PDF \| HTML	2022年 8月 4日
	White paper	Why are Digital Isolators Certified to Meet Electrical Equipment Standards?		2021年 11月 16日
	White paper	Distance Through Insulation: How Digital Isolators Meet Certification Requiremen	PDF \| HTML	2021年 6月 11日
	Application brief	How to Isolate Signal and Power in Isolated CAN Systems (Rev. C)	PDF \| HTML	2021年 5月 25日
	Application note	Isolated CAN Reference Design (Rev. E)		2020年 7月 22日
	Application note	How to Design Isolated CAN Systems With Correct Bus Protection		2018年 6月 19日
	EVM User's guide	Isolated CAN EVM User's Guide		2009年 7月 2日
	Application note	Common-Mode Chokes in CAN Networks: Source of Unexpected Transients		2008年 1月 29日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

ISO1050EVM — ISO1050 隔離 CAN 收發器評估模組

This multi-functional evaluation module (EVM) is designed for the evaluation of the ISO1050 isolated CAN transceiver. Input and output connections, as well as test points for measurements, are provided to help you use this device which is the world's first CAN transceiver with integrated isolation.

使用指南: PDF

TI.com 無法提供

開發套件

TMDXIDDK379D — 適用於工業馬達控制的 C2000 DesignDRIVE 開發套件

DesignDRIVE 開發套件 (IDDK) 硬體提供含完整功率級的整合式伺服驅動設計，可驅動高電壓三相馬達，並能簡化對各種位置回饋、電流感測與控制拓撲的評估。

C2000™ MCU 上的感測週邊設備包括八個 ΔΣ sinc 濾波器，四個 16 或 12 位元 ADC 和窗型比較器，可讓 DesignDRIVE 套件同時支援分流、磁通量閘門/霍爾和 ΔΣ 電流感測。在位置回饋方面，本套件運用整合在 C2000 MCU 上的位置管理解決方案，支援 EnDat、BiSS、T-format、增量編碼器以及 SINCOS 與解析器類比感測器。此外，客戶也可探索配置選項，以允許將 MCU (...)

使用指南: PDF | HTML