LM317L
- Output Voltage Range Adjustable 1.25 V to 32 V
When Used With External Resistor Divider - Output Current Capability of 100 mA
- Input Regulation Typically 0.01% Per Input-Voltage
Change - Output Regulation Typically 0.5%
- Ripple Rejection Typically 80 dB
- For Higher Output Current Requirements,
See LM317M (500 mA) and LM317 (1.5 A)
- Electronic Points of Sale
- Medical, Health, and Fitness Applications
- Printers
- Appliances and White Goods
- TV Set-Top Boxes
All other trademarks are the property of their respective owners
The LM317L device is an adjustable, 3-terminal, positive-voltage regulator capable of supplying 100 mA over an output-voltage range of 1.25 V to 32 V. It is exceptionally easy to use and requires only two external resistors to set the output voltage.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 20 設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
參考設計
PMP15043 — 適用於電池測試系統的 6A、0.05% 電流準確度電源解決方案的參考設計
This reference design circuit introduces a highly accurate, bi-directional current power solution used in battery test systems (BTS). The maximum current capability is 6A with lower than 0.05% full scale accuracy. Controlling through a logic pin, the circuit can be used to charge or discharge a (...)
參考設計
TIDA-00210 — 適用於雙極步進驅動的 75V/10A 受保護全橋式功率級參考設計
Stepper drives are used in many applications operating typically from 12VDC to 48VDC. TI offers a rich family of stepper motor driver solutions with industry standard step/direction and parallel control interfaces.
For applications which require higher torque and power, often voltages above 48VDC, (...)
For applications which require higher torque and power, often voltages above 48VDC, (...)
參考設計
TIDA-00365 — 適用於有刷 DC 驅動器的 75V/10A 受保護全橋式功率級參考設計
Low voltage brushed DC drives are used in many applications. TI offers a rich family of brushed DC motor driver solutions with flexible control interface options for one or more brushed DC motors up to 60V. For applications which require higher torque and power, often voltages above 60VDC (...)
參考設計
PMP8955 — 可程式編輯的輸出恆壓 - 定電流 (CVCC) 準諧振返馳充電器
This industrial charger reference design uses the LM5023 Quasi-Resonant Flyback controller to implement a 120VAC input design with CVCC output configured by microcontroller PWM control from 10 to 22.5V and output current from 200mA to 2A.
參考設計
PMP7246 — 採用 PSFB ZTE 和 HSHB 的 36-60V 輸入、350W 慢汲極調變電源轉換器參考設計
This is a 350W High Speed Full Bridge Phase Shift ZVT Synchronous Rectification DC/DC reference design. It is built for telecom applications to supply a RF Power Amplifier stage. The design is utilizing UCC28950 voltage mode forward and average current limitation backward converter (two quadrant (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
| SOT-89 (PK) | 3 | Ultra Librarian |
| TO-92 (LP) | 3 | Ultra Librarian |
| TSSOP (PW) | 8 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。