LM3281
- Operates from a Single Li-Ion Cell (3 V to 5.5 V)
- 6-MHz (typ.) PWM Switching Frequency
- Fixed Output Voltage: 3.3 V
- Up to 1.2-A Maximum Load Capability
- High Efficiency: 94% (typ.) with 3.8-V VIN at 300 mA
- Analog Bypass: 60-mV (typ.) Drop-Out at 600 mA
- Low IQ: 16 µA typical, 25 µA maximum
- Automatic ECO/PWM/Bypass Mode Change
- Forced PWM Mode for Low Output-Voltage Ripple
- Soft-Start Limits Input Current on Start-Up
- Current Overload Protection
- Thermal Overload Protection
- Small Total Solution Size: < 7.5 mm2
The LM3281 is a high-efficiency low-noise miniature DC-DC converter optimized for powering noise-sensitive wireless connectivity chipsets and RF Front End Modules (FEMs) from a single Lithium-Ion cell. The LM3281 is ideal for “always on” applications with very low unloaded quiescent current of 16 µA (typ.).
The LM3281 steps down an input supply voltage to a fixed output voltage of 3.3 V with output current up to 1200 mA. Five different modes of operation are used to optimize efficiency and minimize battery drain. In Pulse Width Modulation (PWM) mode, the device operates at a fixed frequency of 6 MHz which minimizes RF interference when driving medium-to-heavy loads. At light load, the device automatically enters into Economy (ECO) mode with reduced quiescent current. In a low-battery voltage condition, a bypass mode reduces the voltage dropout to 60 mV (typ.) at 600 mA. If very low output voltage ripple is desired at light loads, the device can also be forced into PWM mode. Shutdown mode turns the device off and reduces battery consumption to 0.1 µA (typ.).
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 日期 |
|---|---|---|---|---|
| * | Data sheet | LM3281 3.3-V, 1.2-A, 6-MHz Miniature Step-Down DC-DC Converter for Wireless Connectivity Solutions datasheet | PDF | HTML | 2014年 11月 24日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
LM3281EVM — 具有類比旁通模式的 LM3281EVM 1.2A、3.3V 微型降壓 DC-DC 轉換器
LM3281EVM 用於可協助評估 LM3281 1.2A、3.3V 微型降壓 DC-DC 轉換器 IC 的功能。 這是一款高效率、低雜訊的降壓轉換器,專為對雜訊敏感的無線連接晶片組與 RF 前端模組 (FEM) 供電而進行了最佳化。 獨特的類比旁路功能可維持最寬輸入電壓範圍的穩壓,直到輸入電壓降至穩壓目標以下並進入完全旁路為止。 旁路模式也可以在 600mA 負載下,提供典型 60mv 的超低壓降。 超低的靜態電流讓 LM3281 成為「常開」應用的理想之選,而其小巧的解決方案尺寸對於空間有限的行動應用來說非常有吸引力。EVM 板上提供標準香蕉插孔,以方便評估。
TIDA-00718 — 適用於 CMOS 影像感測器的小尺寸、低雜訊和高 PSRR 電源參考設計
此解決方案可應用於消費性電子產品和商業領域,例如 IP 網路攝影機、類比安全攝影機、可視門鈴、網際網路攝影機等等。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| DSBGA (YFQ) | 6 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。