LM5168E
- Functional Safety-Capable
- Designed for reliability in rugged applications
- 6V to 115V wide input voltage range
- –55°C to +150°C junction temperature range
- Fixed 3ms internal soft-start timer
- Peak and valley current-limit protection
- Input UVLO and thermal shutdown protection
- Designed for scalable industrial power supplies and battery packs
- Integration reduces design size and cost
- COT mode control architecture
- Integrated 1.9Ω NFET buck switch
- Integrated 0.71Ω NFET synchronous rectifier
- 1.2V internal voltage reference
- No loop compensation components
- Internal VCC bias regulator and boot diode
- Open-drain power-good indicator
- Package: SOIC PowerPAD™-8 integrated circuit package with 1.27mm pin spacing
The LM5168E is an extended temperature range, (–55°C to +150°C) synchronous buck converter designed to regulate over a wide input voltage range, minimizing the need for external surge suppression components. A minimum controllable on time of 50ns facilitates large step-down conversion ratios, enabling the direct step-down from a 48V nominal input to low-voltage rails for reduced system complexity and design cost. The LM5168E operates during input voltage dips as low as 6V, at nearly 100% duty cycle if needed, making the device an excellent choice for wide input supply range industrial and high cell count battery pack applications.
With integrated high-side and low-side power MOSFETs, the LM5168E delivers up to 0.3A of output current. A constant on-time (COT) control architecture provides nearly constant switching frequency with excellent load and line transient response. The LM5168E is available in the auto mode version, which enables ultra-low IQ and diode emulation mode operation for high light-load efficiency.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | LM5168E 115V, 0.3A, Synchronous Buck Converter datasheet | PDF | HTML | 2025年 8月 26日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
LM5168FEVM — LM5168 評估模組,115-V fly-buck 穩壓器
LM5168PEVM — LM5168P 115-V DC/DC 降壓穩壓器評估模組
LM5168P 評估模組 (EVM) 是採用同步整流的 115-V DC/DC 降壓穩壓器,可在較小型元件封裝中實現高轉換效率。EVM 可在 20 V 至 115 V (最大 120 V) 的廣泛輸入電壓範圍內運作,並在高達 0.3 A 下以 500 kHz 切換頻率提供調節的 12 V 輸出。輸出電壓的設定點準確度高於 1.5%,並可使用外部電阻分壓器進行調節。此模組設計採用 LM5168P 同步降壓轉換器,具備廣泛輸入電壓範圍、廣泛工作週期範圍、整合式高壓側與低壓側電源 MOSFET、先進過電流防護與精密啟用。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| HSOIC (DDA) | 8 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點