LM61435-Q1

現行

車用 3-V 至 36-V、3.5-A 同步降壓轉換器

立即訂購

產品規格表

document-pdfAcrobat LM61435-Q1Automotive 3-V to 36-V, 3.5-A, Low EMI Synchronous Step-Down Converter datasheet (Rev. B) (英文) PDF | HTML

LM61435-Q1

現行

立即訂購

產品詳細資料

Rating

Automotive

Topology

Buck

Iout (max) (A)

3.5

Vin (max) (V)

36

Vin (min) (V)

3

Vout (max) (V)

34

Vout (min) (V)

1

Features

Enable, Fixed soft start, Frequency synchronization, Light-load efficiency, Overcurrent protection, Power good, Spread Spectrum, Synchronous rectification, Wettable flanks package

EMI features

Low parasitic Hotrod packaging, Spread Spectrum

Control mode

current mode

Operating temperature range (°C)

-40 to 150

Iq (typ) (A)

0.000007

Duty cycle (max) (%)

98

TI functional safety category

Functional Safety-Capable

Rating

Automotive

Topology

Buck

Iout (max) (A)

3.5

Vin (max) (V)

36

Vin (min) (V)

3

Vout (max) (V)

34

Vout (min) (V)

1

Features

Enable, Fixed soft start, Frequency synchronization, Light-load efficiency, Overcurrent protection, Power good, Spread Spectrum, Synchronous rectification, Wettable flanks package

EMI features

Low parasitic Hotrod packaging, Spread Spectrum

Control mode

current mode

Operating temperature range (°C)

-40 to 150

Iq (typ) (A)

0.000007

Duty cycle (max) (%)

98

TI functional safety category

Functional Safety-Capable

VQFN-HR (RJR)

14

14 mm² (4 mm × 3.5 mm)

AEC-Q100 qualified for automotive applications
- Temperature grade 1: –40°C to +150°C, T_J
Functional Safety-Capable
- Documentation available to aid functional safety system design
Optimized for ultra low EMI requirements
- Hotrod™ package and parallel input path minimize switch node ringing
- Spread spectrum reduces peak emissions
- Adjustable SW node rise time
Designed for automotive applications
- Supports 42-V automotive load dump
- ±1% total output regulation accuracy
- V_OUT adjustable from 1 V to 95% of V_IN, with factory option for 3.3-V fixed output voltage
- 0.3-V dropout with 3-A load (typical)
High efficiency power conversion at all loads
- 7-µA no load current at 13.5 V_IN, 3.3 V_OUT
- 83% PFM efficiency at 1-mA, 13.5 V_IN, 5 V_OUT
- External bias option for improved efficiency
Suitable for scalable power supplies
- Pin compatible with:
  - LM61440-Q1 (36 V, 4 A, adjustable f_SW)
  - LM61460-Q1 (36 V, 6 A, adjustable f_SW)

AEC-Q100 qualified for automotive applications
- Temperature grade 1: –40°C to +150°C, T_J
Functional Safety-Capable
- Documentation available to aid functional safety system design
Optimized for ultra low EMI requirements
- Hotrod™ package and parallel input path minimize switch node ringing
- Spread spectrum reduces peak emissions
- Adjustable SW node rise time
Designed for automotive applications
- Supports 42-V automotive load dump
- ±1% total output regulation accuracy
- V_OUT adjustable from 1 V to 95% of V_IN, with factory option for 3.3-V fixed output voltage
- 0.3-V dropout with 3-A load (typical)
High efficiency power conversion at all loads
- 7-µA no load current at 13.5 V_IN, 3.3 V_OUT
- 83% PFM efficiency at 1-mA, 13.5 V_IN, 5 V_OUT
- External bias option for improved efficiency
Suitable for scalable power supplies
- Pin compatible with:
  - LM61440-Q1 (36 V, 4 A, adjustable f_SW)
  - LM61460-Q1 (36 V, 6 A, adjustable f_SW)

The LM61435-Q1 is an automotive-focused, high-performance, DC-DC synchronous step-down converter. With integrated high-side and low-side MOSFETs, up to 3.5 A of output current is delivered over a wide input range of 3.0 V to 36 V; tolerant of 42 V, easing input surge protection design. The LM61435-Q1 implements soft recovery from dropout eliminating overshoot on the output.

The LM61435-Q1 is specifically designed for minimal EMI. The device incorporates pseudo-random spread spectrum, adjustable SW node rise time, low-EMI VQFN-HR package featuring low switch node ringing, and optimized pinout for ease of use. The switching frequency can be set or synchronized between 200 kHz and 2.2 MHz to avoid noise sensitive frequency bands. In addition the frequency can be selected for improved efficiency at low operating frequency or smaller solution size at high operating frequency.

Auto-mode enables frequency foldback when operating at light loads, allowing an unloaded current consumption of only 7 µA (typical) and high light load efficiency. Seamless transition between PWM and PFM modes, along with very low MOSFET ON resistances and an external bias input, ensures exceptional efficiency across the entire load range.

Electrical characteristics are specified over a junction temperature range of –40°C to +150°C. Find additional resources in the Related Documentation.

The LM61435-Q1 is an automotive-focused, high-performance, DC-DC synchronous step-down converter. With integrated high-side and low-side MOSFETs, up to 3.5 A of output current is delivered over a wide input range of 3.0 V to 36 V; tolerant of 42 V, easing input surge protection design. The LM61435-Q1 implements soft recovery from dropout eliminating overshoot on the output.

The LM61435-Q1 is specifically designed for minimal EMI. The device incorporates pseudo-random spread spectrum, adjustable SW node rise time, low-EMI VQFN-HR package featuring low switch node ringing, and optimized pinout for ease of use. The switching frequency can be set or synchronized between 200 kHz and 2.2 MHz to avoid noise sensitive frequency bands. In addition the frequency can be selected for improved efficiency at low operating frequency or smaller solution size at high operating frequency.

Auto-mode enables frequency foldback when operating at light loads, allowing an unloaded current consumption of only 7 µA (typical) and high light load efficiency. Seamless transition between PWM and PFM modes, along with very low MOSFET ON resistances and an external bias input, ensures exceptional efficiency across the entire load range.

Electrical characteristics are specified over a junction temperature range of –40°C to +150°C. Find additional resources in the Related Documentation.

filter

尋找其它 DC/DC 轉換器

下載觀看有字幕稿的影片影片

您可能會感興趣的類似產品

open-in-new

比較替代產品

針腳對針腳的功能與所比較的裝置相同。

LM61430-Q1

現行

車用 3-V 至 36-V、3-A、低雜訊同步降壓轉換器 Lower load current.

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 4

重要文件	類型	標題	格式選項
*	資料表	LM61435-Q1Automotive 3-V to 36-V, 3.5-A, Low EMI Synchronous Step-Down Converter datasheet (Rev. B)	PDF \| HTML	2021/6/22
	應用說明	How to Migrate Between LM614xx and LM624xx Product Families	PDF \| HTML	2021/11/1
	功能安全資訊	LM614xx-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA (Rev. B)	PDF \| HTML	2021/9/15
	功能安全資訊	FIT Rate, Failure Mode Distribution LM61435-Q1		2020/3/30