首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器
首頁
電源管理
DC/DC 切換穩壓器
DC/DC 轉換器
最新

LM654B0-Q1

現行

Automotive, 36VIN, 20A synchronous step-down converter for high efficiency and low EMC

立即訂購
產品規格表

LM654B0-Q1

現行
產品規格表 立即訂購

產品詳細資料

Rating Automotive Topology Buck Iout (max) (A) 20 Vin (max) (V) 36 Vin (min) (V) 3 Vout (max) (V) 32 Vout (min) (V) 1 Features Adjustable soft start, Adjustable switching frequency, Auto Mode, Automotive load dump, Enable, Fixed Output, Forced PWM, Frequency synchronization, Over Current Protection, Power good, Stackable, Thermal shutdown, UVLO adjustable EMI features Low parasitic Hotrod packaging, Spread Spectrum Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.0000021 Duty cycle (max) (%) 99 TI functional safety category Functional Safety-Capable
Rating Automotive Topology Buck Iout (max) (A) 20 Vin (max) (V) 36 Vin (min) (V) 3 Vout (max) (V) 32 Vout (min) (V) 1 Features Adjustable soft start, Adjustable switching frequency, Auto Mode, Automotive load dump, Enable, Fixed Output, Forced PWM, Frequency synchronization, Over Current Protection, Power good, Stackable, Thermal shutdown, UVLO adjustable EMI features Low parasitic Hotrod packaging, Spread Spectrum Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.0000021 Duty cycle (max) (%) 99 TI functional safety category Functional Safety-Capable
WQFN-FCRLF (VDA) 26 20.25 mm² 4.5 x 4.5
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Built in clocking for stacking of converters
  • Internal or external compensation
  • Pin selectable output voltage 3.3V and 5V fixed or adjustable from 0.8V to 0.9 × VIN
  • Wide input voltage range: 3V to 36V
  • Mitigated interference and noise technology – architecture 1 (MINT 1)
    • Optimized for low EMI requirements
    • Facilitates CISPR 25 Class 5 compliance
    • Mode pin configurable +8.5% or +17% dual-random spread spectrum reducing peak emissions
    • Enhanced HotRod™ QFN package with symmetrical pinout
  • Switching frequency from 300kHz to 2.2MHz
    • Pin-configurable AUTO or FPWM operation
    • Can be synchronized to external clock
  • Low minimum on time: 32ns (typical)
    • Enables 36V to 3.3V conversion at 2.2MHz
  • High-efficiency and high power density
    • > 94% efficiency at 12VIN to 5VOUT, IOUT = 15A, 400kHz
    • 8µA PFM no-load input current with bias pin at VOUT
    • 4.5mm × 4.5mm eQFN-26 with wettable flanks
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Built in clocking for stacking of converters
  • Internal or external compensation
  • Pin selectable output voltage 3.3V and 5V fixed or adjustable from 0.8V to 0.9 × VIN
  • Wide input voltage range: 3V to 36V
  • Mitigated interference and noise technology – architecture 1 (MINT 1)
    • Optimized for low EMI requirements
    • Facilitates CISPR 25 Class 5 compliance
    • Mode pin configurable +8.5% or +17% dual-random spread spectrum reducing peak emissions
    • Enhanced HotRod™ QFN package with symmetrical pinout
  • Switching frequency from 300kHz to 2.2MHz
    • Pin-configurable AUTO or FPWM operation
    • Can be synchronized to external clock
  • Low minimum on time: 32ns (typical)
    • Enables 36V to 3.3V conversion at 2.2MHz
  • High-efficiency and high power density
    • > 94% efficiency at 12VIN to 5VOUT, IOUT = 15A, 400kHz
    • 8µA PFM no-load input current with bias pin at VOUT
    • 4.5mm × 4.5mm eQFN-26 with wettable flanks

The LM654xx-Q1 is a buck converter family designed for high efficiency, high-power density, and low EMI performance with mitigated interference and noise technology (MINT 1) switcher technology for automotive applications. The converter operates over a wide input voltage range of 3V to 36V with pin selectable fixed output voltages of 3.3V and 5V or an adjustable output.

The low EMI operation is enabled with minimized loop inductance, optimized SW node slew-rate, and pin-selectable +8.5% or +17% dual-random spread spectrum (DRSS). The DRSS significantly reduces peak emissions through a combination of triangular and pseudo-random modulation while keeping output voltage ripple very low.

The current-mode control architecture with 32ns typical minimum on-time allows high conversion ratios at high frequencies, fast transient response, and excellent load and line regulation.

The LM654xx-Q1 is a buck converter family designed for high efficiency, high-power density, and low EMI performance with mitigated interference and noise technology (MINT 1) switcher technology for automotive applications. The converter operates over a wide input voltage range of 3V to 36V with pin selectable fixed output voltages of 3.3V and 5V or an adjustable output.

The low EMI operation is enabled with minimized loop inductance, optimized SW node slew-rate, and pin-selectable +8.5% or +17% dual-random spread spectrum (DRSS). The DRSS significantly reduces peak emissions through a combination of triangular and pseudo-random modulation while keeping output voltage ripple very low.

The current-mode control architecture with 32ns typical minimum on-time allows high conversion ratios at high frequencies, fast transient response, and excellent load and line regulation.
filter 尋找其它 DC/DC 轉換器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 日期
* Data sheet LM654xx-Q1 Pin-Compatible 20A (25A Peak), 15A, 12A, 10A, Stackable Automotive Buck Converters With Mitigated Interference and Noise Technology (MINT) datasheet (Rev. A) PDF | HTML 2026年 6月 29日
Functional safety information LM6x4xx Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2026年 6月 30日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LM654B0EVM-1PH — LM654B0-Q1 評估模組

德州儀器 LM654B0EVM 評估模組 (EVM) 可協助設計師評估 LM654xx 廣泛輸入電壓降壓轉換器系列的運作及性能。LM654xx 系列為易於使用的同步降壓轉換器系列，可從高達 36V 的輸入電壓供應最高 10A、12A、15A 或 20A 的負載電流。
使用指南: PDF | HTML
要求
設計工具

LM654XXDESIGN-CALC — LM654XX-Q1 QuickStart design tool

QuickStart design calculator for the LM654XX-Q1
支援產品和硬體

支援產品和硬體
下載
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN-FCRLF (VDA) 26 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片