LMR64010
- Input Voltage Range of 2.7V to 14V
- Output Voltage up to 40V
- Switch Current up to 1A
- 1.6 MHz Switching Frequency
- Low Shutdown Iq, <1 µA
- Cycle-by-Cycle Current Limiting
- Internally Compensated
- SOT-23-5 Packaging (2.92 x 2.84 x 1.08mm)
- Fully Enabled for WEBENCH® Power Designer
Performance Benefits
- Extremely Easy to Use
- Tiny Overall Solution Reduces System Cost
All trademarks are the property of their respective owners.
The LMR64010 switching regulators is a current-mode boost converter operating at a fixed frequency of 1.6 MHz.
The use of SOT-23 package, made possible by the minimal power loss of the internal 1A switch, and use of small inductors and capacitors result in the industry's highest power density. The 40V internal switch makes these solutions perfect for boosting to voltages of 16V or greater.
These parts have a logic-level shutdown pin that can be used to reduce quiescent current and extend battery life.
Protection is provided through cycle-by-cycle current limiting and thermal shutdown. Internal compensation simplifies design and reduces component count.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
LMR64010XMFDEMO — SOT-23 的 LMR64010 SIMPLE SWITCHER® 40Vout、1A 升壓穩壓器展示板
The LMR62014 and LMR64010 are high frequency switching boost regulators which offer small size and high power conversion efficiency. The parts operate at a 1.6MHz switching frequency. The primary difference between the LMR62014 and LMR64010 is that the LMR62014 has a higher current internal switch (...)
LMR64010 Unencrypted PSpice Transient Model Package (Rev. A)
TIDA-01393 — 適合 Xilinx® Zynq® UltraScale+™ MPSoC 應用的電源參考設計
各種版本的 TPS65086x PMIC 允許此設計為裝置供電,從搭載雙核心 ARM® Cortex®-A53 應用處理器與雙核心 ARM Cortex R5 即時處理器的基本 ZU2CG 裝置,到高端 ZU7EV、ZU19EG 與 ZU21DR 裝置,其會新增其他元件至 MPSoC,例如圖形處理單元、視訊轉碼器單元和高達 16 個 16.3Gbps 收發器。
此設計包括許多可搭配 TPS65086x (...)
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
SOT-23 (DBV) | 5 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點