TPS563300

現行

採用 SOT-583 封裝的 3.8-V 至 28-V 輸入、3-A 同步降壓轉換器

產品詳細資料

Iout (max) (A) 3 Vin (min) (V) 3.8 Vin (max) (V) 28 Topology Buck Type Converter Switching frequency (min) (kHz) 500 Switching frequency (max) (kHz) 500 Features Enable, Light Load Efficiency, Over Current Protection, Soft Start Fixed, Spread Spectrum, Synchronous Rectification Control mode current mode Vout (min) (V) 0.8 Vout (max) (V) 22 Rating Catalog Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.00002
Iout (max) (A) 3 Vin (min) (V) 3.8 Vin (max) (V) 28 Topology Buck Type Converter Switching frequency (min) (kHz) 500 Switching frequency (max) (kHz) 500 Features Enable, Light Load Efficiency, Over Current Protection, Soft Start Fixed, Spread Spectrum, Synchronous Rectification Control mode current mode Vout (min) (V) 0.8 Vout (max) (V) 22 Rating Catalog Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.00002
SOT-5X3 (DRL) 8 3.36 mm² 2.1 x 1.6
  • Configured for a wide range of applications
    • 3.8-V to 28-V input voltage range
    • 0.8-V to 22-V output voltage range
    • 3-A continuous output current
    • 0.8V ± 1.5% reference voltage (25°C)
    • –40°C to 150°C operating junction temperature
    • Integrated 76-mΩ and 32-mΩ MOSFETs
    • 20-µA low quiescent current (typical)
    • Maximum 98% duty cycle operation
    • Precision EN threshold
  • Ease of use and small solution size
    • Peak current control mode with internal compensation
    • Pulse frequency modulation (PFM) for high light-load efficiency
    • 500-kHz fixed switching frequency
    • EMI friendly with frequency spread spectrum
    • Support start-up with prebiased output
    • Cycle-by-cycle OC limit for both high-side and low-side MOSFETs
    • Non-latched protections for OTP, OCP, OVP, UVP, and UVLO
    • 1.6-mm × 2.1-mm SOT583 package
  • Create a custom design using the TPS563300 with the WEBENCH Power Designer
  • Configured for a wide range of applications
    • 3.8-V to 28-V input voltage range
    • 0.8-V to 22-V output voltage range
    • 3-A continuous output current
    • 0.8V ± 1.5% reference voltage (25°C)
    • –40°C to 150°C operating junction temperature
    • Integrated 76-mΩ and 32-mΩ MOSFETs
    • 20-µA low quiescent current (typical)
    • Maximum 98% duty cycle operation
    • Precision EN threshold
  • Ease of use and small solution size
    • Peak current control mode with internal compensation
    • Pulse frequency modulation (PFM) for high light-load efficiency
    • 500-kHz fixed switching frequency
    • EMI friendly with frequency spread spectrum
    • Support start-up with prebiased output
    • Cycle-by-cycle OC limit for both high-side and low-side MOSFETs
    • Non-latched protections for OTP, OCP, OVP, UVP, and UVLO
    • 1.6-mm × 2.1-mm SOT583 package
  • Create a custom design using the TPS563300 with the WEBENCH Power Designer

The TPS563300 is a high-efficiency, easy-to-use synchronous buck converter with a wide input voltage range of 3.8 V to 28 V, and supports up to 3-A continuous output current and 0.8-V to 22-V output voltage.

The device employs fixed-frequency peak current control mode for fast transient response and good line and load regulation. The optimized internal loop compensation eliminates external compensation components over a wide range of output voltage and operation frequency. Pulse frequency modulation (PFM) mode maximizes the light load efficiency. The low quiescent current feature is beneficial for long battery life time in low-power operation. The device also has a frequency spread spectrum feature, which helps with lowering down EMI noise.

The device provides complete protections including OTP, OVP, UVLO, cycle-by-cycle OC limit, and UVP with hiccup mode. This device is in a small SOT583 (1.6-mm × 2.1-mm) package with 0.5-mm pin pitch, and has an optimized pinout for easy PCB layout and promotes good EMI performance.

The TPS563300 is a high-efficiency, easy-to-use synchronous buck converter with a wide input voltage range of 3.8 V to 28 V, and supports up to 3-A continuous output current and 0.8-V to 22-V output voltage.

The device employs fixed-frequency peak current control mode for fast transient response and good line and load regulation. The optimized internal loop compensation eliminates external compensation components over a wide range of output voltage and operation frequency. Pulse frequency modulation (PFM) mode maximizes the light load efficiency. The low quiescent current feature is beneficial for long battery life time in low-power operation. The device also has a frequency spread spectrum feature, which helps with lowering down EMI noise.

The device provides complete protections including OTP, OVP, UVLO, cycle-by-cycle OC limit, and UVP with hiccup mode. This device is in a small SOT583 (1.6-mm × 2.1-mm) package with 0.5-mm pin pitch, and has an optimized pinout for easy PCB layout and promotes good EMI performance.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同,但引腳輸出與所比較的產品不同
TPS62933 現行 採用 SOT-583 封裝的 3.8-V 至 30-V、3-A、200-kHz 至 2.2-MHz、低 IQ 同步降壓轉換器 30 Vin with broader frequency, power good and lower IQ.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet TPS563300 3.8-V to 28-V, 3-A Synchronous Buck Converter in SOT583 Package datasheet PDF | HTML 2022年 7月 1日
Application note Peak Current Mode Converter Secondary Stage Filter Design for Low Ripple Power – Part II: Hybrid Sense Network PDF | HTML 2024年 2月 27日
EVM User's guide TPS563300EVM-226 3-A Regulator Evaluation Module PDF | HTML 2022年 10月 10日
Certificate TPS563300EVM EU RoHS Declaration of Conformity (DoC) 2022年 3月 22日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS563300EVM — 3.8-V 至 28-V 輸入、3-A 同步降壓轉換器評估模組

TPS563300 評估模組 (EVM) 是高效率且簡易的同步降壓轉換器。本產品擁有 3.8 V 至 28 V 的廣泛輸入電壓範圍,最適合由 5 V、12 V、19 V、24 V 電源匯流排軌供電的系統。本產品支援最高 3 A 連續輸出電流、0.8 V 至 22 V 輸出電壓,以及最大 98% 的占空比運作。本產品採用固定頻率尖峰電流控制模式,以獲得快速瞬態回應及良好線路與負載穩壓。

使用指南: PDF | HTML
TI.com 無法提供
模擬型號

TPS563300 PSpice Unencrypted Transient Model

SLUM820.ZIP (267 KB) - PSpice Model
封裝 引腳 下載
SOT-5X3 (DRL) 8 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片