首頁 電源管理 線性與低壓差 (LDO) 穩壓器

TPS7A25

現行

具有電源良好功能的 300-mA、18-V、超低 IQ、高準確度、可調整低壓差電壓穩壓器

產品詳細資料

Rating Catalog Vin (max) (V) 18 Vin (min) (V) 2.4 Iout (max) (A) 0.3 Output options Adjustable Output, Fixed Output Vout (max) (V) 17.64 Vout (min) (V) 1.24 Fixed output options (V) 1.25, 1.8, 2.5, 3.3, 5, 17.64 Noise (µVrms) 300 PSRR at 100 KHz (dB) 22 Iq (typ) (mA) 0.002 Features Enable, Power good, Soft start Thermal resistance θJA (°C/W) 73.3 Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Accuracy (%) 1 Dropout voltage (Vdo) (typ) (mV) 210 Operating temperature range (°C) -40 to 125
Rating Catalog Vin (max) (V) 18 Vin (min) (V) 2.4 Iout (max) (A) 0.3 Output options Adjustable Output, Fixed Output Vout (max) (V) 17.64 Vout (min) (V) 1.24 Fixed output options (V) 1.25, 1.8, 2.5, 3.3, 5, 17.64 Noise (µVrms) 300 PSRR at 100 KHz (dB) 22 Iq (typ) (mA) 0.002 Features Enable, Power good, Soft start Thermal resistance θJA (°C/W) 73.3 Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Accuracy (%) 1 Dropout voltage (Vdo) (typ) (mV) 210 Operating temperature range (°C) -40 to 125
WSON (DRV) 6 4 mm² 2 x 2
  • Ultra-low IQ: 2 µA
  • Input voltage: 2.4 V to 18 V
  • Output voltage options available:
    • Fixed: 1.25 V to 5.0 V
    • Adjustable: 1.24 V to 17.66 V
  • 1% accuracy over temperature
  • Low dropout: 340 mV (max) at 300 mA
  • Open-drain, power-good output
  • Thermal shutdown and overcurrent protection
  • Active overshoot pulldown
  • Operating junction temperature: –40°C to +125°C
  • Stable with 1-µF output capacitors
  • Package: 6-pin WSON
  • Ultra-low IQ: 2 µA
  • Input voltage: 2.4 V to 18 V
  • Output voltage options available:
    • Fixed: 1.25 V to 5.0 V
    • Adjustable: 1.24 V to 17.66 V
  • 1% accuracy over temperature
  • Low dropout: 340 mV (max) at 300 mA
  • Open-drain, power-good output
  • Thermal shutdown and overcurrent protection
  • Active overshoot pulldown
  • Operating junction temperature: –40°C to +125°C
  • Stable with 1-µF output capacitors
  • Package: 6-pin WSON

The TPS7A25 low-dropout (LDO) linear voltage regulator introduces a combination of a 2.4-V to 18-V input voltage range with very-low quiescent current (IQ). These features help modern appliances meet increasingly stringent energy requirements, and help extend battery life in portable-power solutions.

The TPS7A25 is available in both fixed and adjustable versions. For more flexibility or higher output voltages, the adjustable version uses feedback resistors to set the output voltage from 1.24 V to 17.64 V. Both versions have a 1% output regulation accuracy that provides precision regulation for most microcontroller (MCU) references.

The TPS7A25 LDO operates more efficiently than standard linear regulators because the maximum dropout voltage is less than 340 mV at 300 mA of current. This maximum dropout voltage allows for 92.5% efficiency from a 5.4-V input voltage (VIN) to a 5.0-V output voltage (VOUT).

The power-good (PG) indicator can be used to either hold an MCU in reset until power is good, or for sequencing. The PG pin is an open-drain output; therefore, the pin is easily level-shifted for monitoring by a rail other than VOUT. The built-in current limit and thermal shutdown help protect the regulator in the event of a load short or fault.

For a higher output current alternative, consider the TPS7A26.

The TPS7A25 low-dropout (LDO) linear voltage regulator introduces a combination of a 2.4-V to 18-V input voltage range with very-low quiescent current (IQ). These features help modern appliances meet increasingly stringent energy requirements, and help extend battery life in portable-power solutions.

The TPS7A25 is available in both fixed and adjustable versions. For more flexibility or higher output voltages, the adjustable version uses feedback resistors to set the output voltage from 1.24 V to 17.64 V. Both versions have a 1% output regulation accuracy that provides precision regulation for most microcontroller (MCU) references.

The TPS7A25 LDO operates more efficiently than standard linear regulators because the maximum dropout voltage is less than 340 mV at 300 mA of current. This maximum dropout voltage allows for 92.5% efficiency from a 5.4-V input voltage (VIN) to a 5.0-V output voltage (VOUT).

The power-good (PG) indicator can be used to either hold an MCU in reset until power is good, or for sequencing. The PG pin is an open-drain output; therefore, the pin is easily level-shifted for monitoring by a rail other than VOUT. The built-in current limit and thermal shutdown help protect the regulator in the event of a load short or fault.

For a higher output current alternative, consider the TPS7A26.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同,但引腳輸出與所比較的裝置不同
TPS7A02 現行 具啟用功能的 200mA 奈米功率 IQ (25nA), 低壓差 (LDO) 電壓穩壓器 Lower VIN LDO that supports 25-nA IQ and fast transient response
TPS7A03 現行 具有快速暫態響應的奈米功率 IQ 200nA 200mA 低壓差 (LDO) 電壓穩壓器 Lower VIN LDO that supports 200-nA IQ and fast transient response

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 6
類型 標題 日期
* Data sheet TPS7A25 300-mA, 18-V, Ultra-Low IQ, Low-Dropout Linear Voltage Regulator With Power-Good datasheet (Rev. C) PDF | HTML 2022年 12月 2日
Application note An empirical analysis of the impact of board layout on LDO thermal performance (Rev. A) PDF | HTML 2025年 9月 23日
White paper Understanding the Foundations of Quiescent Current in Linear Power Systems 2021年 2月 18日
Application note A Topical Index of TI LDO Application Notes (Rev. F) 2019年 6月 27日
E-book LDO Basics (Rev. A) 2019年 4月 8日
Technical article LDO basics: dropout PDF | HTML 2017年 3月 16日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS7A26EVM-021 — 具有電源良狀態好的 TPS7A26 500-mA 18-V 超低 IQ LDO 線性穩壓器評估模組

TPS7A26 評估模組 (EVM) 爲典型配置設計,用於評估 TPS7A26 裝置的運作和性能,其為 500mA 低壓差 (LDO) 線性穩壓器。

TPS7A26EVM-021 主要配置爲參考設計,可供需要高達 500 mA 動態負載電流的工程應用。

使用指南: PDF
TI.com 無法提供
模擬型號

TPS7A2501 Unencrypted PSPICE TRANSIENT MODEL

SBVM941.ZIP (55 KB) - PSpice Model
參考設計

TIDA-050031 — 適合汽車緊急呼叫應用的備用電池電源參考設計

此備用電源參考設計適用於汽車緊急呼叫應用。它使用一個 LiFePO4 電池作為備用電池。使用升壓轉換器 TPS61088-Q1 時,最小備用電池電壓可降至 2V;最大輸出功率可達 8 V/1.7A。此參考設計為低成本高效率且尺寸精巧。相較於整合式解決方案競爭產品,此參考設計的價值為從備用電池升壓時,效率大幅提升且冗餘較少。
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WSON (DRV) 6 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片