首頁 電源管理 電源開關 eFuses 和熱插拔制器
首頁
電源管理
電源開關
eFuses 和熱插拔制器

TPS7H2211-SP

現行

抗輻射、QMLV 和 QMLP 4.5-V 至 14-V 輸入 3.5-A eFuse

立即訂購
產品規格表

TPS7H2211-SP

現行
產品規格表 立即訂購

產品詳細資料

FET Internal Ron (typ) (mΩ) 54 Vin (min) (V) 4.5 Vin (max) (V) 14 Vabsmax_cont (V) 16 Overcurrent response Circuit breaker Fault response Auto-retry Soft start Adjustable Overvoltage response Cut-off Features Overvoltage protection, Reverse current blocking always, Soft-start, Thermal shutdown Rating Space Device type eFuses and hot swap controllers Operating temperature range (°C) -55 to 125 Function Inrush current control, Overvoltage protection, Reverse current blocking, Short circuit protection, Thermal shutdown
FET Internal Ron (typ) (mΩ) 54 Vin (min) (V) 4.5 Vin (max) (V) 14 Vabsmax_cont (V) 16 Overcurrent response Circuit breaker Fault response Auto-retry Soft start Adjustable Overvoltage response Cut-off Features Overvoltage protection, Reverse current blocking always, Soft-start, Thermal shutdown Rating Space Device type eFuses and hot swap controllers Operating temperature range (°C) -55 to 125 Function Inrush current control, Overvoltage protection, Reverse current blocking, Short circuit protection, Thermal shutdown
CFP (HKR) 16 105.6 mm² 11 x 9.6 DIESALE (KGD) — See data sheet HTSSOP (DAP) 32 89.1 mm² 11 x 8.1
  • Total ionizing dose (TID) characterized to 100krad(Si)
    • Radiation hardness assurance availability of 100krad(Si)
  • Single-event effects (SEE) characterized
    • Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune to linear energy transfer (LET) = 75MeV-cm2/mg*
    • Single-event functional interrupt (SEFI) and single-event transient (SET) characterized to LET = 75MeV-cm2/mg*
  • Integrated single channel eFuse
  • Input voltage range: 4.5V to 14V
  • Low on-resistance (RON) of 60mΩ maximum at 25°C and VIN = 12V
  • 3.5A maximum continuous switch current
  • Low control input threshold aids in use of 1.2, 1.8, 2.5, and 3.3V logic
  • Configurable rise time (soft start)
  • Reverse current protection (RCP)
  • Overvoltage protection (OVP)
  • Internal current limit (fast-trip)
  • Thermal shutdown
  • Ceramic and plastic package with thermal pad
  • Available in military (–55°C to 125°C) temperature range
  • Total ionizing dose (TID) characterized to 100krad(Si)
    • Radiation hardness assurance availability of 100krad(Si)
  • Single-event effects (SEE) characterized
    • Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune to linear energy transfer (LET) = 75MeV-cm2/mg*
    • Single-event functional interrupt (SEFI) and single-event transient (SET) characterized to LET = 75MeV-cm2/mg*
  • Integrated single channel eFuse
  • Input voltage range: 4.5V to 14V
  • Low on-resistance (RON) of 60mΩ maximum at 25°C and VIN = 12V
  • 3.5A maximum continuous switch current
  • Low control input threshold aids in use of 1.2, 1.8, 2.5, and 3.3V logic
  • Configurable rise time (soft start)
  • Reverse current protection (RCP)
  • Overvoltage protection (OVP)
  • Internal current limit (fast-trip)
  • Thermal shutdown
  • Ceramic and plastic package with thermal pad
  • Available in military (–55°C to 125°C) temperature range

The TPS7H2211 is a single channel eFuse (integrated FET load switch with additional features) that provides reverse current protection, overvoltage protection, and a configurable rise time to minimize inrush current, soft start. The device contains P-channel MOSFETs that operate over an input voltage range of 4.5V to 14V and supports a maximum continuous current of 3.5A.

The switch is controlled by an on and off input (EN), which is capable of interfacing directly with low-voltage control signals. Overvoltage protection and soft start are programmable with few external components through the OVP and SS pins. The TPS7H2211 is available in a ceramic and plastic package with an exposed thermal pad allowing for improved thermal performance. A standard microcircuit drawing (SMD) is available for the QML 5962R1822001VXC. A vendor item drawing (VID) is available for the -SEP variant, V62/23609.

The TPS7H2211 is a single channel eFuse (integrated FET load switch with additional features) that provides reverse current protection, overvoltage protection, and a configurable rise time to minimize inrush current, soft start. The device contains P-channel MOSFETs that operate over an input voltage range of 4.5V to 14V and supports a maximum continuous current of 3.5A.

The switch is controlled by an on and off input (EN), which is capable of interfacing directly with low-voltage control signals. Overvoltage protection and soft start are programmable with few external components through the OVP and SS pins. The TPS7H2211 is available in a ceramic and plastic package with an exposed thermal pad allowing for improved thermal performance. A standard microcircuit drawing (SMD) is available for the QML 5962R1822001VXC. A vendor item drawing (VID) is available for the -SEP variant, V62/23609.

open-in-new 尋找其它 eFuses 和熱插拔制器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳的功能與所比較的產品相同
TPS7H2201-SP 現行 抗輻射、QMLV 和 QMLP 1.5-V 至 7-V 輸入 6-A eFuse 7-V eFuse in identical package that is 6-A capable with additional protection features

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 20
類型 標題 日期
* Data sheet TPS7H2211-SP and TPS7H2211-SEP Radiation-Hardness-Assured (RHA) 14V, 3.5A eFuse datasheet (Rev. F) PDF | HTML 2024年 3月 6日
* Radiation & reliability report Single-Event-Effects Test Report of the TPS7H2211-SP Load Switch (Rev. A) 2023年 12月 6日
* Radiation & reliability report TPS7H2211-QMLP Total Ionizing Dose (TID) Radiation Report PDF | HTML 2023年 12月 6日
* Radiation & reliability report TPS7H2211-SP Neutron Displacement Damage (NDD) Characterization 2021年 11月 8日
* Radiation & reliability report TPS7H2211-SP Total Ionizing Dose (TID) Radiation Report (Rev. A) 2021年 10月 18日
* SMD TPS7H2211-SP SMD 5962-18220 2021年 9月 2日
More literature TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. A) 2023年 8月 31日
Application note QML flow, its importance, and obtaining lot information (Rev. C) 2023年 8月 30日
Certificate TPS7H2211EVM EU Declaration of Conformity (DoC) 2023年 6月 21日
Application note Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. A) PDF | HTML 2022年 11月 17日
Application note Single-Event Effects Confidence Interval Calculations (Rev. A) PDF | HTML 2022年 10月 19日
Selection guide TI Space Products (Rev. I) 2022年 3月 3日
EVM User's guide TPS7H2211EVM-CVAL Evaluation Module User's Guide PDF | HTML 2021年 8月 6日
Application note DLA Standard Microcircuit Drawings (SMD) and JAN Part Numbers Primer 2020年 8月 21日
Technical article Simplifying radiation-hardened power-supply design with eFuses PDF | HTML 2020年 7月 14日
Application note Hermetic Package Reflow Profiles, Termination Finishes, and Lead Trim and Form PDF | HTML 2020年 5月 18日
Application note Failure Containment in Spacecraft Point-of-Load Power Supplies 2020年 4月 30日
Technical article 4 trends in space-grade power management PDF | HTML 2020年 2月 12日
E-book Radiation Handbook for Electronics (Rev. A) 2019年 5月 21日
Technical article When failure isn’t an option: power up your next satellite with integrated functio PDF | HTML 2019年 4月 30日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS7H2211EVM — 航太級強化型產品、4.5-V 至 14-V 輸入、3.5-A、負載開關和 eFuse 評估模組

TPS7H2211EVM 展示單一 TPS7H2211 eFuse 航太級強化型產品的運作情況。電路板提供可裝入其他元件的元件封裝，以便進行自訂配置測試，例如平行或備援 eFuse。

使用指南: PDF | HTML
TI.com 無法提供
開發板

TPS7H2211EVM-CVAL — 適用於 4.5-V 至 14-V 輸入、3.5-A 負載開關和 eFuse 的 TPS7H2211-SP 評估模組

TPS7H2211EVM-CVAL 是 TPS7H2211-SP 的評估模組 (EVM)。其可實現負載開關運作，並測試提供的反向電流保護、過電壓保護及可配置上升時間，以將 TPS7H2211-SP 的突波電流 (緩啟動) 降到最低。

使用指南: PDF | HTML
TI.com 無法提供
模擬型號

TPS7H2211-SP PSpice Transient Model

SLVMDN6.ZIP (27 KB) - PSpice Model
下載
模擬型號

TPS7H2211-SP PSpice Worst-Case Analysis (WCA) Model

SLVMDQ4.ZIP (24 KB) - PSpice Model
下載
計算工具

TVS-RECOMMENDATION-CALC — TVS diode recommendation tool

This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
支援產品和硬體

支援產品和硬體

此設計資源支援此類別中多數產品。

檢查產品詳細資料頁面以確認支援。
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
封裝 引腳 下載
CFP (HKR) 16 檢視選項
DIESALE (KGD) —
HTSSOP (DAP) 32 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片