UCC28950
- Enhanced zero-voltage switching (ZVS) range
- Direct synchronous rectifier (SR) control
- Light-load efficiency management including:
- Burst mode operation
- Discontinuous conduction mode (DCM), dynamic SR on/off control
- Average- or peak-current mode control with programmable slope compensation and voltage-mode control
- Closed-loop soft-start and enable function
- Programmable switching frequency up to 1 MHz with bidirectional synchronization
- (±3%) cycle-by-cycle current limit protection with hiccup mode support
- 150µA start-up current
- VDD undervoltage lockout
- Wide temperature range: –40°C to +125°C
The UCC28951 controller is an enhanced version of the UCC28950. It is a fully compatible drop-in replacement for the UCC28950. The UCC2895x devices use advanced control of the full-bridge in addition to active control of the synchronous rectifier (SR) output stage.
ZVS operation ensured over a wide range of operating conditions, while the load current naturally tunes the switching delays of the secondary-side synchronous rectifiers(SR). This functionality maximizes overall system efficiency.
Easily get started with the UCC2895x 600W phase shifted full bridge design review/application note,
The 24-pin, TSSOP package complies with RoHS requirements.
您可能會感興趣的類似產品
可直接投入的替代產品,相較於所比較的裝置,具備升級功能
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
UCC27714EVM-551 — UCC27714 600W 相移全橋轉換器評估模組
此 600W EVM 旨在展示如何在相移全橋轉換器中運用 UCC28950 控制 IC、UCC27524A 及 UCC27714 閘極驅動器,並於 50% 到 100% 負載實現 ZVS。
UCC28950EVM-442 — UCC28950 600W 相移全橋轉換器評估模組
UCC28950EVM-442 是 600W 相移全橋式轉換器,可將 370V 至 410V DC 輸入轉換為穩壓 12V 輸出。此轉換器的設計可將 ZVS 維持至 50% 負載。此 600W EVM 旨在展示如何透過實現 50% 至 100% 負載的 ZVS,從而將 UCC28950 控制裝置用於高效率應用。為達到此高效率, UCC28950 設計用於驅動全橋式轉換器二次側同步整流器。UCC28950 也整合突衝模式和 DCM 功能,提升無負載效率
UCC28950 and UCC28951 TINA-TI Startup Reference Design (Rev. A)
UCC28950 and UCC28951 TINA-TI Steady State Reference Design (Rev. A)
SLUC222 — UCC2895x Excel Design Tool
支援產品和硬體
PMP7246 — 採用 PSFB ZTE 和 HSHB 的 36-60V 輸入、350W 慢汲極調變電源轉換器參考設計
PMP6712 — 適用 PoE 供電設備 (PSE) 的雙通道全橋式轉換器參考設計 (54 V @ 30 A)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| TSSOP (PW) | 24 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。