首頁 放大器 特殊功能放大器 4-20mA 訊號調節器
首頁
放大器
特殊功能放大器
4-20mA 訊號調節器

XTR305

現行

工業類比電流轉電壓輸出驅動器

立即訂購
產品規格表

XTR305

現行
產品規格表 立即訂購

產品詳細資料

Vs (min) (V) 10 Vs (max) (V) 40 Offset voltage drift (±) (max) (µV/°C) 10 Offset voltage (±) (max) (mV) 2.5 Product type 3-wire on-chip diagnostics Operating temperature range (°C) -55 to 125 Rating Catalog
Vs (min) (V) 10 Vs (max) (V) 40 Offset voltage drift (±) (max) (µV/°C) 10 Offset voltage (±) (max) (mV) 2.5 Product type 3-wire on-chip diagnostics Operating temperature range (°C) -55 to 125 Rating Catalog
VQFN (RGW) 20 25 mm² 5 x 5
  • User-Selectable: Current or Voltage Output
  • VOUT: ±10 V (up to ±17.5 V at ±20-V supply)
  • IOUT: ±20 mA (Linear up to ±24 mA)
  • 40-V Supply Voltage
  • Diagnostic Features:
    • Short- or Open-Circuit Fault Indicator Pin
    • Thermal Protection
    • Overcurrent Protection
  • No Current Shunt Required
  • Output Disable for Single Input Mode
  • Separate Driver and Receiver Channels
  • Designed For Testability ™
  • User-Selectable: Current or Voltage Output
  • VOUT: ±10 V (up to ±17.5 V at ±20-V supply)
  • IOUT: ±20 mA (Linear up to ±24 mA)
  • 40-V Supply Voltage
  • Diagnostic Features:
    • Short- or Open-Circuit Fault Indicator Pin
    • Thermal Protection
    • Overcurrent Protection
  • No Current Shunt Required
  • Output Disable for Single Input Mode
  • Separate Driver and Receiver Channels
  • Designed For Testability ™

The XTR305 is a complete output driver for cost-sensitive industrial and process control applications. The output can be configured as current or voltage by the digital I/V select pin. No external shunt resistor is required. Only external gain-setting resistors and a loop compensation capacitor are required.

The separate driver and receiver channels provide flexibility. The instrumentation amplifier (IA) can be used for remote voltage sense or as a high-voltage, high-impedance measurement channel. In voltage-output mode, a copy of the output current is provided, allowing calculation of load resistance.

The digital output-selection capability, together with the error flags and monitor pins, makes remote configuration and troubleshooting possible. Fault conditions on the output and on the IA input, as well as overtemperature conditions, are indicated by the error flags. The monitoring pins provide continuous feedback about load power or impedance. For additional protection, the maximum output current is limited, and thermal protection is provided.

The XTR305 is specified over the −40°C to +85°C industrial temperature range and for supply voltages up to 40 V, and is operational over the extended industrial temperature range (−55°C to +125°C).

The XTR305 is a complete output driver for cost-sensitive industrial and process control applications. The output can be configured as current or voltage by the digital I/V select pin. No external shunt resistor is required. Only external gain-setting resistors and a loop compensation capacitor are required.

The separate driver and receiver channels provide flexibility. The instrumentation amplifier (IA) can be used for remote voltage sense or as a high-voltage, high-impedance measurement channel. In voltage-output mode, a copy of the output current is provided, allowing calculation of load resistance.

The digital output-selection capability, together with the error flags and monitor pins, makes remote configuration and troubleshooting possible. Fault conditions on the output and on the IA input, as well as overtemperature conditions, are indicated by the error flags. The monitoring pins provide continuous feedback about load power or impedance. For additional protection, the maximum output current is limited, and thermal protection is provided.

The XTR305 is specified over the −40°C to +85°C industrial temperature range and for supply voltages up to 40 V, and is operational over the extended industrial temperature range (−55°C to +125°C).
filter 尋找其它 4-20mA 訊號調節器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet XTR305 Industrial Analog Current or Voltage Output Driver datasheet PDF | HTML 2018年 2月 16日
Application note PLC Analog Output Module Architectures PDF | HTML 2025年 1月 29日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

XTR300EVM — XTR300 評估模組

The XTR300EVM is intended to provide basic evaluation of the functionality and performance of the XTR300. The XTR300EVM printed circuit board (PCB) is designed to provide:

  • Easy handling of the small QFN package with the recommended land pattern for soldering the QFN device.
  • Easy access to all pins of (...)
使用指南: PDF | HTML
TI.com 無法提供
模擬型號

XTR305 PSpice Model (Rev. B)

SBOMAK3B.ZIP (30 KB) - PSpice Model
下載
模擬型號

XTR305 TINA-TI Reference Design

SBOMAK5.TSC (113 KB) - TINA-TI Reference Design
下載
模擬型號

XTR305 TINA-TI Spice Model

SBOMAK4.ZIP (20 KB) - TINA-TI Spice Model
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
參考設計

TIDA-01633 — 適用於 AC/伺服驅動器的精巧型可編程 4-20mA 和 +/-10V 類比輸出參考設計

此參考設計實現精巧體積、雙通道可配置類比電壓及電流輸出模組，適合 AC 逆變器與伺服驅動器使用。整合式工業輸出驅動器：與使用多個運算放大器及被動元件時的狀況相比，XTR305 的尺寸更為精巧。輸出可透過主機 MCU（如 C2000™ MCU）編程為 ± 10V 或 4mA 至 20mA，或使用跨接器手動配置。錯誤旗標與輸出負載監控功能可實現穩固設計。同一通道還可配置為 ± 10V 或 4mA 至 20mA 的類比輸入。介面適合 C2000 LaunchPad™ 開發套件。
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGW) 20 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片