SNAS800 July   2021 LMX1204

ADVANCE INFORMATION  

  1. Features
  2. Applications
  3. Description
  4. Revision History
  5. Pin Configuration and Functions
  6. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Timing Requirements
    7. 6.7 Typical Characteristics
  7. Detailed Description
    1. 7.1 Overview
      1. 7.1.1 Range of Dividers and Multiplier
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Power On Reset
      2. 7.3.2 Clock Outputs
        1. 7.3.2.1 Clock Output Buffers
        2. 7.3.2.2 Clock MUX
        3. 7.3.2.3 Clock Divider
        4. 7.3.2.4 Clock Multiplier
      3. 7.3.3 SYSREF
        1. 7.3.3.1 SYSREF Output Buffers
          1. 7.3.3.1.1 SYSREF Output Buffer for Main Clocks
          2. 7.3.3.1.2 SYSREF Output Buffer for LOGICLK
        2. 7.3.3.2 SYSREF Frequency and Delay Generation
        3. 7.3.3.3 SYSREFREQ pins
          1. 7.3.3.3.1 SYSREFREQ Pins Common Mode Voltage
          2. 7.3.3.3.2 SYSREFREQ Pin Windowing Feature
        4. 7.3.3.4 SYNC Feature
      4. 7.3.4 LOGICLK Output
        1. 7.3.4.1 LOGICLK Output Format
        2. 7.3.4.2 LOGICLK_DIV_PRE and LOGICLK_DIV Dividers
    4. 7.4 Device Functional Modes
  8. Application and Implementation
    1. 8.1 Applications Information
      1. 8.1.1 Current Consumption
      2. 8.1.2 Treatment of Unused Pins
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curve
  9. Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Receiving Notification of Documentation Updates
    2. 11.2 Support Resources
    3. 11.3 Trademarks
    4. 11.4 Electrostatic Discharge Caution
    5. 11.5 Glossary
  12. 12Mechanical, Packaging, and Orderable Information
    1. 12.1 Package Option Addendum
    2. 12.2 Tape and Reel Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

LOGICLK Output Format

The LOGICLK output format can be programmed to LVDS, LVPECL, and CML modes. Depending on the format, the common mode may be programmable or external components may be required (see Table 7-12).

Table 7-12 LOGICLK Formats and Properties
LOGICLK_FMT FORMAT EXTERNAL COMPONENTS REQUIRED COMMON MODE
0 LVDS None Programmable through LOGICLK_VCM and compensated with temperature
1 LVPECL Emitter Resistors Not programmable
2 CML Pull-Up Resistors Not programmable
3 LVDS None Programmable through LOGICLK_VCM and NOT compensated with temperature