SNAS800 July   2021 LMX1204

ADVANCE INFORMATION  

  1. Features
  2. Applications
  3. Description
  4. Revision History
  5. Pin Configuration and Functions
  6. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Timing Requirements
    7. 6.7 Typical Characteristics
  7. Detailed Description
    1. 7.1 Overview
      1. 7.1.1 Range of Dividers and Multiplier
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Power On Reset
      2. 7.3.2 Clock Outputs
        1. 7.3.2.1 Clock Output Buffers
        2. 7.3.2.2 Clock MUX
        3. 7.3.2.3 Clock Divider
        4. 7.3.2.4 Clock Multiplier
      3. 7.3.3 SYSREF
        1. 7.3.3.1 SYSREF Output Buffers
          1. 7.3.3.1.1 SYSREF Output Buffer for Main Clocks
          2. 7.3.3.1.2 SYSREF Output Buffer for LOGICLK
        2. 7.3.3.2 SYSREF Frequency and Delay Generation
        3. 7.3.3.3 SYSREFREQ pins
          1. 7.3.3.3.1 SYSREFREQ Pins Common Mode Voltage
          2. 7.3.3.3.2 SYSREFREQ Pin Windowing Feature
        4. 7.3.3.4 SYNC Feature
      4. 7.3.4 LOGICLK Output
        1. 7.3.4.1 LOGICLK Output Format
        2. 7.3.4.2 LOGICLK_DIV_PRE and LOGICLK_DIV Dividers
    4. 7.4 Device Functional Modes
  8. Application and Implementation
    1. 8.1 Applications Information
      1. 8.1.1 Current Consumption
      2. 8.1.2 Treatment of Unused Pins
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curve
  9. Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Receiving Notification of Documentation Updates
    2. 11.2 Support Resources
    3. 11.3 Trademarks
    4. 11.4 Electrostatic Discharge Caution
    5. 11.5 Glossary
  12. 12Mechanical, Packaging, and Orderable Information
    1. 12.1 Package Option Addendum
    2. 12.2 Tape and Reel Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

Clock Output Buffers

The output buffers have a format that is open collector with an integrated pull-up resistor, similar to CML.

GUID-20210304-CA0I-3VL6-CDWN-PGH79QFR7TCD-low.gif Figure 7-2 CLKOUT Output Buffer

The output buffers can be enabled with CLKOUTx_EN bits. In addition to this, their output power can be individually set with the CLKOUTx_PWR field. However, these fields only control the output buffer, not the internal channel path that drives this buffer, the SYSREF generator, or the SYSREF output. To power down the entire path, disable the CHx_EN bit.

Table 7-2 Clock Output Power
CHx_EN INTERNAL CHANNEL PATH CLKOUTx_EN CLKOUTx_PWR OUTPUT BUFFER
0 Powered Down Don't Care Don't Care Powered Down
1 Powered Up 0 Don't Care Powered Down
1 0 Minimum
1
...
7 Maximum