SBASAE4 December 2025 ADS125P08
PRODUCTION DATA
The ADS125P08 uses a switched-capacitor, third-order, singe-loop modulator with a 5-bit internal quantizer. This modulator topology achieves excellent noise and linearity performance while consuming very low power. As with most high-order modulators driven by high amplitude out-of-band signals, modulator saturation can occur. When saturated, the in-band signal still converts, however the noise floor increases. Figure 7-9 illustrates the amplitude limit of out-of-band signals to avoid modulator saturation. The limit of dc and in-band signal amplitudes are 1dB above standard full scale.
Modulator saturation is indicated by the MOD_OVR_FAULTn bit of the ADC_REF_STATUS register. The modulator saturation status is latched during the conversion period and is cleared by writing 1b to the register bit. Modulator saturation resulting from out-of-band signals can be avoided by using an antialias filter at the ADC inputs.