SLAAET6 August   2025

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1S-Parameter Definition
    1. 1.1 Insertion Loss (S21)
    2. 1.2 Return Loss (S11)
  5. 2High-Speed Signal Design Example Of FPD-Link™ Serializer Body
    1. 2.1 Design Example Overview
    2. 2.2 Key Points in High-Speed FPD-Link Layout Design
  6. 3Factors Impacting Return Loss and Optimization Guidelines
    1. 3.1 Transmission Line Impedance Impact
    2. 3.2 AC Coupling Capacitor Landing Pad Impact And Optimization
      1. 3.2.1 Mitigation Strategy: Anti-Pad Implementation
      2. 3.2.2 Simulation Results With Ansys® HFSS
    3. 3.3 Through-Hole Connector Footprint Impact and Optimization
      1. 3.3.1 Through-Hole Connector Via Anti-Pad Impact
        1. 3.3.1.1 Simulation Results With Ansys® HFSS
      2. 3.3.2 Surrounding Ground Vias Impact
        1. 3.3.2.1 Simulation Results (Surrounding Ground Vias Impact)
      3. 3.3.3 Non-Functional Pad Impact
        1. 3.3.3.1 Simulation Results (Non-Functional Pad Impact)
    4. 3.4 Generic Signal Via Impact and Optimization
      1. 3.4.1 Simulation Results
    5. 3.5 ESD Diode Parasitic Capacitance Impact and Optimization
  7. 4Summary

3.3.2 Surrounding Ground Vias Impact

TI recommends adding a circle of ground vias around the signal via because the spacing of ground vias directly influence the impedance stability. Closer ground vias shorten the return current path, minimizing loop inductance and stabilizing impedance. Wider spacing increases inductance, degrading high-frequency performance.