Product details

Rating Catalog Operating temperature range (°C) 0 to 125
Rating Catalog Operating temperature range (°C) 0 to 125
HTSSOP (DDV) 44 113.4 mm² 14 x 8.1
  • Wide 12 V to 48 V supply voltage operation
  • Supports up to 50 W peak power
  • High-Efficiency Power Stage with 90-mΩ Output MOSFETs
  • Power-On Reset for Protection on Power Up Without Any Power-Supply Sequencing
  • Integrated Self-Protection Circuits Including
    • Undervoltage protection
    • Over temperature protection
    • Overload protection
    • Short Circuit protection
  • Available in 44-pin HTSSOP package (DDV)
  • Wide 12 V to 48 V supply voltage operation
  • Supports up to 50 W peak power
  • High-Efficiency Power Stage with 90-mΩ Output MOSFETs
  • Power-On Reset for Protection on Power Up Without Any Power-Supply Sequencing
  • Integrated Self-Protection Circuits Including
    • Undervoltage protection
    • Over temperature protection
    • Overload protection
    • Short Circuit protection
  • Available in 44-pin HTSSOP package (DDV)

The DRV2901 is a high performance lens cleaner transducer driver. This system only requires a simple passive LC demodulation filter to deliver high-quality, high-efficiency amplification with proven EMI compliance. This device requires two power supplies, at 12 V for GVDD and VDD, and 12 V to 48 V for PVDD. The DRV2901 does not require power-up sequencing due to internal power-on reset.

The DRV2901 has an innovative protection system integrated on-chip, safeguarding the device against a wide range of fault conditions that could damage the system. These safeguards are short-circuit protection, overcurrent protection, undervoltage protection, and overtemperature protection. The DRV2901 has a new proprietary current-limiting circuit that reduces the possibility of device shutdown during high-level transients.

The DRV2901 is a high performance lens cleaner transducer driver. This system only requires a simple passive LC demodulation filter to deliver high-quality, high-efficiency amplification with proven EMI compliance. This device requires two power supplies, at 12 V for GVDD and VDD, and 12 V to 48 V for PVDD. The DRV2901 does not require power-up sequencing due to internal power-on reset.

The DRV2901 has an innovative protection system integrated on-chip, safeguarding the device against a wide range of fault conditions that could damage the system. These safeguards are short-circuit protection, overcurrent protection, undervoltage protection, and overtemperature protection. The DRV2901 has a new proprietary current-limiting circuit that reduces the possibility of device shutdown during high-level transients.

Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 4
Type Title Date
* Data sheet DRV2901 Single-Channel PWM-input Piezo Transducer Driver for Ultrasonic Cleaning with Wide Supply Voltage datasheet PDF | HTML 27 Sep 2022
Certificate ULC1001-DRV2911EVM EU Declaration of Conformity (DoC) 29 Sep 2023
Technical article Ultrasonic lens cleaning: A solid-state technology you didn’t know you needed PDF | HTML 16 Dec 2022
Technical article What is ultrasonic lens cleaning technology? PDF | HTML 05 May 2022

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

ULC1001-DRV290XEVM — ULC1001 and DRV2901 hardware evaluation bundles for ultrasonic lens cleaning (ULC)

The ULC1001-DRV290XEVM is an evaluation module (EVM) showcasing a two-chip solution of the ULC1001 configurable digital signal processor (DSP) controller and the DRV2901 piezo driver. The pair work together to provide self-cleaning functionality with features like temperature detection, lens fault (...)

Evaluation board

ULC-HPB-DEMO — 2-MP camera with integrated ultrasonic lens cleaning and mini spray bottle

The ULC-HPB-DEMO is a collaboration between Texas Instruments and HPB Optoelectronics to create an all-in-one evaluation system for ultrasonic lens cleaning (ULC). The construction of the demonstration kit is completed by HPB Optoelectronics. Also known as the Executive Demo, this demo is simple (...)
User guide: PDF | HTML
Package Pins Download
HTSSOP (DDV) 44 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos