Top

Product details

Parameters

Architecture Fixed Gain/Buffer Number of channels (#) 1 Total supply voltage (Min) (+5V=5, +/-5V=10) 3 Total supply voltage (Max) (+5V=5, +/-5V=10) 10 GBW (Typ) (MHz) 1750 BW @ Acl (MHz) 1750 Acl, min spec gain (V/V) 1 Slew rate (Typ) (V/us) 4580 Vn at flatband (Typ) (nV/rtHz) 3.9 Vn at 1 kHz (Typ) (nV/rtHz) 13 Iq per channel (Typ) (mA) 10 Vos (offset voltage @ 25 C) (Max) (mV) 1 Rating Catalog Operating temperature range (C) -40 to 85 Output current (Typ) (mA) 74 2nd harmonic (dBc) 58 3rd harmonic (dBc) 53 @ MHz 20 open-in-new Find other High-speed op amps (GBW>=50MHz)

Package | Pins | Size

SOIC (D) 8 19 mm² 4.9 x 3.9 SOT-23 (DBV) 5 5 mm² 2.9 x 1.6 open-in-new Find other High-speed op amps (GBW>=50MHz)

Features

  • Closed-Loop Buffer
  • 1750MHz Small Signal Bandwidth
  • 4580V/μs Slew Rate
  • 0.06% / 0.02° Differential Gain/Phase
  • −52dBc THD at 20MHz
  • Single Supply Operation (3V Min.)
  • 75mA Output Current

All trademarks are the property of their respective owners.

open-in-new Find other High-speed op amps (GBW>=50MHz)

Description

The LMH6559 is a high-speed, closed-loop buffer designed for applications requiring the processing of very high frequency signals. While offering a small signal bandwidth of 1750MHz, and an ultra high slew rate of 4580V/μs the LMH6559 consumes only 10mA of quiescent current. Total harmonic distortion into a load of 100Ω at 20MHz is −52dBc. The LMH6559 is configured internally for a loop gain of one. Input resistance is 200kΩ and output resistance is but 1.2Ω. These characteristics make the LMH6559 an ideal choice for the distribution of high frequency signals on printed circuit boards. Differential gain and phase specifications of 0.06% and 0.02° respectively at 3.58MHz make the LMH6559 well suited for the buffering of video signals.

The device is fabricated on Texas Instruments' high-speed VIP10 process using TI's proven high performance circuit architectures.

open-in-new Find other High-speed op amps (GBW>=50MHz)
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 7
Type Title Date
* Datasheet LMH6559 High-Speed, Closed-Loop Buffer datasheet (Rev. C) Mar. 18, 2013
Technical articles How to reduce distortion in high-voltage, high-frequency signal generation for AWGs Oct. 30, 2018
Technical articles What are the advantages of using JFET-input amplifiers in high-speed applications? Jun. 18, 2018
Technical articles Unique active mux capability combines buffer and switch into one solution Oct. 10, 2017
White papers The Signal e-book: A compendium of blog posts on op amp design topics Mar. 28, 2017
Technical articles How to minimize filter loss when you drive an ADC Oct. 20, 2016
User guides AN-2095 LMH730316 SOT23-5 / SOT23-6 Hi Performance Amplifier Eval Board (Rev. B) May 01, 2013

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
10
Description

Texas Instruments offers this unpopulated Evaluation Board to aid in the evaluation and testing of high-speed Op Amps that are offered in the 5-/6-pin SOT-23 package. Resistors, capacitors, or any other surface-mount components can be easily mounted on this board in the desired circuit (...)

Features
  • Accommodates various high-speed Op Amp
  • Allows quick and easy evaluation
  • Serves as reference design to aid in high-speed PCB layout
  • Utilizes surface-mount components
EVALUATION BOARDS Download
document-generic User guide
25
Description

Texas Instruments offers this unpopulated Evaluation Board to aid in the evaluation and testing of high-speed Op Amp that are offered in the 5-/6-Pin SOT-23 package. This 4 layer board is designed to improve speed and reduce harmonic distortion by careful placement and routing of components and (...)

Features
  • Maximizes attainable speed and minimizes distortion products
  • Accommodates various high-speed Op Amp
  • Allows quick and easy evaluation
  • Serves as reference design to aid in high-speed PCB layout
  • Utilizes surface-mount components

NOTE: IC samples are not shipped with the Evaluation PCB, but may be requested (...)

Design tools & simulation

SIMULATION MODELS Download
SNOM159.ZIP (2 KB) - PSpice Model
SIMULATION TOOLS Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
SIMULATION TOOLS Download
SPICE-based analog simulation program
TINA-TI TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
document-generic User guide
CALCULATION TOOLS Download
Analog engineer's calculator
ANALOG-ENGINEER-CALC — The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
Features
  • Expedites circuit design with analog-to-digital converters (ADCs) and digital-to-analog converters (DACs)
    • Noise calculations
    • Common unit translation
  • Solves common amplifier circuit design problems
    • Gain selections using standard resistors
    • Filter configurations
    • Total noise for common amplifier configurations
  • (...)
CALCULATION TOOLS Download
Voltage Divider Determines A Set of Resistors for a Voltage Divider
VOLT-DIVIDER-CALC VOLT-DIVIDER-CALC quickly determines a set of resistors for a voltage divider. This KnowledgeBase Javascript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. This calculator can also be used to design non-inverting attentuation circuits.

(...)

Reference designs

REFERENCE DESIGNS Download
50-Ohm 2-GHz Oscilloscope Front-end Reference Design
TIDA-00826 This reference design is part of an analog front-end for 50Ω-input oscilloscope application. System designers can readily use this evaluation platform to process input signals from DC to 2 GHz in both frequency-domain and time-domain applications.
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
SOIC (D) 8 View options
SOT-23 (DBV) 5 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos