Meets or Exceeds the Requirement of TIA/EIA-232-F and ITU Recommendation V.28
Withstands Sustained Output Short Circuit to Any Low-Impedance Voltage Between -25 V and 25 V
2-us Maximum Transition Time Through the 3-V to -3-V Transition Region Under Full 2500-pF Load
Inputs Compatible With Most TTL Families
Common Strobe Input
Inverting Output
Slew Rate Can Be Controlled With an External Capacitor at the Output
Standard Supply Voltages...±12 V

open-in-new

Find other RS-232 transceivers

The SN75150 is a monolithic dual line driver designed to satisfy the requirements of the standard interface between data-terminal equipment and data-communication equipment as defined by TIA/EIA-232-F. A rate of 20 kbits/s can be transmitted with a full 2500-pF load. Other applications are in data-transmission systems using relatively short single lines, in level translators, and for driving MOS devices. The logic input is compatible with most TTL families. Operation is from 12-V and -12-V power supplies.

The SN75150 is characterized for operation from 0°C to 70°C.

open-in-new

Find other RS-232 transceivers

Download

Technical documentation

= Top documentation for this product selected by TI

No results found. Please clear your search and try again.

View all 1

	Type	Title	Date
*	Datasheet	Dual Line Driver datasheet (Rev. C)	Jun. 25, 1999

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Design tools & simulation

SIMULATION TOOL Download

PSpice® for TI design and simulation tool

PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)

Request

Features

Leverages Cadence PSpice Technology
Preinstalled library with a suite of digital models to enable worst-case timing analysis
Dynamic updates ensure you have access to most current device models
Optimized for simulation speed without loss of accuracy
Supports simultaneous analysis of multiple products
(...)

View details

SIMULATION TOOL Download

SPICE-based analog simulation program

TINA-TI — TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

document-generic

User guide

View options

View details