Product details


Architecture Current FB Number of channels (#) 2 Total supply voltage (Min) (+5V=5, +/-5V=10) 10 Total supply voltage (Max) (+5V=5, +/-5V=10) 30 GBW (Typ) (MHz) 110 BW @ Acl (MHz) 110 Acl, min spec gain (V/V) 1 Slew rate (Typ) (V/us) 1550 Vn at flatband (Typ) (nV/rtHz) 2.8 Vn at 1 kHz (Typ) (nV/rtHz) 2.2 Iq per channel (Typ) (mA) 4.9 Vos (offset voltage @ 25 C) (Max) (mV) 10 Rail-to-rail No Rating Catalog Operating temperature range (C) -40 to 85, 0 to 70 CMRR (Typ) (dB) 67 Input bias current (Max) (pA) 2000000 Offset drift (Typ) (uV/C) 10 Output current (Typ) (mA) 270 2nd harmonic (dBc) 78 3rd harmonic (dBc) 78 @ MHz 1 open-in-new Find other High-speed op amps (GBW>=50MHz)

Package | Pins | Size

HSOIC (DDA) 8 19 mm² 3.90 x 4.90 SOIC (D) 8 19 mm² 3.91 x 4.9 open-in-new Find other High-speed op amps (GBW>=50MHz)


  • Low Noise:
    • 2.9-pA/√Hz Noninverting Current Noise
    • 10.8-pA/√Hz Inverting Current Noise
    • 2.2-nV/√Hz Voltage Noise
  • Wide Supply Voltage Range: ±5 V to ± 15 V
  • Wide Output Swing:
    • 25-VPP Output Voltage, RL = 100 , ±15-V Supply
  • High Output Current: 150 mA (Min)
  • High Speed:
    • 110-MHz (–3-dB BW, G = 1, ±15 V)
    • 1550-V/µs Slew Rate (G = 2, ±15 V)
  • Low Distortion (G = 2):
    • –78 dBc (1 MHz, 2 VPP, 100- Load)
  • Low-Power Shutdown (THS3115)
    • 300-µA Shutdown Quiescent Current per Channel
  • Standard SOIC, SOIC PowerPAD™, and TSSOP PowerPAD Packages
  • Evaluation Module Available
    • Communication Equipment
    • Video Distribution
    • Motor Drivers
    • Piezo Drivers

PowerPAD Is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.

open-in-new Find other High-speed op amps (GBW>=50MHz)


The THS3112/5 are low-noise, high-speed current feedback amplifiers, ideal for any application requiring high output current. The low noninverting current noise of 2.9 pA/√Hz and the low inverting current noise of 10.8pA/√Hz increase signal-to-noise ratios for enhanced signal resolution. The THS3112/5 can operate from ±5-V to ±15-V supply voltages, while drawing as little as 4.5 mA of supply current per channel. It offers low –78-dBc total harmonic distortion driving 2 VPP into a 100- load. The THS3115 features a low-power shutdown mode, consuming only 300-µA shutdown quiescent current per channel. The THS3112/5 are packaged in standard SOIC, SOIC PowerPAD™, and TSSOP PowerPAD packages.

open-in-new Find other High-speed op amps (GBW>=50MHz)

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 10
Type Title Date
* Datasheet Low-Noise, High-Speed Current Feedback Amplifiers datasheet (Rev. C) Sep. 16, 2010
Technical articles How to reduce distortion in high-voltage, high-frequency signal generation for AWGs Oct. 30, 2018
Technical articles What are the advantages of using JFET-input amplifiers in high-speed applications? Jun. 18, 2018
Technical articles Unique active mux capability combines buffer and switch into one solution Oct. 10, 2017
E-book The Signal e-book: A compendium of blog posts on op amp design topics Mar. 28, 2017
Technical articles How to minimize filter loss when you drive an ADC Oct. 20, 2016
Application note Expanding the usability of current-feedback amplifiers Feb. 28, 2005
Application note Active filters using current-feedback amplifiers Feb. 25, 2005
Application note Noise Analysis for High Speed Op Amps (Rev. A) Jan. 17, 2005
User guide THS3112/22 EVM User's Guide Apr. 17, 2002

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Design tools & simulation

SLOM415.ZIP (2 KB) - PSpice Model
SLOM416.TSC (2325 KB) - TINA-TI Reference Design
SLOM417.ZIP (6 KB) - TINA-TI Spice Model
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
SPICE-based analog simulation program
TINA-TI TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Analog engineer's calculator
ANALOG-ENGINEER-CALC — The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
  • Expedites circuit design with analog-to-digital converters (ADCs) and digital-to-analog converters (DACs)
    • Noise calculations
    • Common unit translation
  • Solves common amplifier circuit design problems
    • Gain selections using standard resistors
    • Filter configurations
    • Total noise for common amplifier configurations
  • (...)
Voltage Divider Determines A Set of Resistors for a Voltage Divider
VOLT-DIVIDER-CALC VOLT-DIVIDER-CALC quickly determines a set of resistors for a voltage divider. This KnowledgeBase Javascript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. This calculator can also be used to design non-inverting attentuation circuits.


CAD/CAE symbols

Package Pins Download
SO PowerPAD (DDA) 8 View options
SOIC (D) 8 View options

Ordering & quality

Information included:
  • RoHS
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​


Related videos