Top

Product details

Parameters

Architecture FET / CMOS Input, Voltage FB Number of channels (#) 1 Total supply voltage (Min) (+5V=5, +/-5V=10) 10 Total supply voltage (Max) (+5V=5, +/-5V=10) 32 GBW (Typ) (MHz) 210 BW @ Acl (MHz) 325 Acl, min spec gain (V/V) 1 Slew rate (Typ) (V/us) 1000 Vn at flatband (Typ) (nV/rtHz) 7 Vn at 1 kHz (Typ) (nV/rtHz) 7 Iq per channel (Typ) (mA) 11.5 Vos (offset voltage @ 25 C) (Max) (mV) 0.5 Rail-to-rail No Rating Catalog Operating temperature range (C) -40 to 85 CMRR (Typ) (dB) 95 Input bias current (Max) (pA) 100 Offset drift (Typ) (uV/C) 2.5 Output current (Typ) (mA) 95 2nd harmonic (dBc) 76 3rd harmonic (dBc) 94 @ MHz 5 open-in-new Find other High-speed op amps (GBW>=50MHz)

Package | Pins | Size

HSOIC (DDA) 8 19 mm² 3.90 x 4.90 HVSSOP (DGN) 8 9 mm² 3 x 3 SOIC (D) 8 19 mm² 3.91 x 4.9 open-in-new Find other High-speed op amps (GBW>=50MHz)

Features

  • High Bandwidth:
    • 325 MHz in Unity Gain
    • 210 MHz Gain Bandwidth Product
  • High Slew Rate:
    • 900 V/µs (G = 2)
    • 1000 V/µs (G = 5)
  • Low Distortion of –76 dB, SFDR at 5 MHz
  • Maximum Input Bias Current: 100 pA
  • Input Voltage Noise: 7 nV/√Hz
  • Maximum Input Offset Voltage: 500 µV at 25°C
  • Low Offset Drift: 2.5 µV/°C
  • Input Impedance: 109 || 3.9 pF
  • Wide Supply Range: ± 5 V to ± 15 V
  • High Output Current: 95 mA
open-in-new Find other High-speed op amps (GBW>=50MHz)

Description

The THS4631 is a high-speed, FET-input operational amplifier designed for applications requiring wideband operation, high-input impedance, and high-power supply voltages. By providing a 210-MHz gain bandwidth product, ±15-V supply operation, and 100-pA input bias current, the THS4631 is capable of simultaneous wideband transimpedance gain and large output signal swing. The fast 1000 V/µs slew rate allows for fast settling times and good harmonic distortion at high frequencies. Low current and voltage noise allow amplification of extremely low-level input signals while still maintaining a large signal-to-noise ratio.

The characteristics of the THS4631 make it ideally suited for use as a wideband photodiode amplifier. Photodiode output current is a prime candidate for transimpedance amplification as shown below. Other potential applications include test and measurement systems requiring high-input impedance, ADC and DAC buffering, high-speed integration, and active filtering.

The THS4631 is offered in an 8-pin SOIC (D), and the 8-pin SOIC (DDA) and MSOP (DGN) with PowerPAD™ package.

open-in-new Find other High-speed op amps (GBW>=50MHz)
Download

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 9
Type Title Date
* Data sheet High-Voltage High Slew Rate Wideband FET-Input Op Amp datasheet (Rev. B) Aug. 17, 2011
Technical article How to reduce distortion in high-voltage, high-frequency signal generation for AWGs Oct. 30, 2018
Technical article What are the advantages of using JFET-input amplifiers in high-speed applications? Jun. 19, 2018
Technical article Unique active mux capability combines buffer and switch into one solution Oct. 10, 2017
Application note Transimpedance Amplifiers (TIA): Choosing the Best Amplifier for the job (Rev. A) May 16, 2017
E-book The Signal e-book: A compendium of blog posts on op amp design topics Mar. 28, 2017
Technical article How to minimize filter loss when you drive an ADC Oct. 20, 2016
Application note Transimpedance Considerations for High-Speed Operational Amplifiers Nov. 22, 2009
Application note Noise Analysis for High Speed Op Amps (Rev. A) Jan. 17, 2005

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
49
Description

THS4631EVM's is an evaluation Module for the DDA (8 pin SOIC power pad)  package.

The THS4631EVM's are designed to demonstrate the functionality and versatility of the device. The EVM is ready for power, signal source, and test instruments.

The THS4631 evaluation module (EVM) User's Guide is included (...)

Features
  • Configured with 50 ohms input/output impedance.  
  • Decoupling capacitors
  • Connectors: Vs+, GND, Vs-, J1J2, J3 and test points.
  • Input and Output signals are via SMA connectors.
  • Power connectors are via banana jack.
EVALUATION BOARD Download
49
Description

THS4631EVM's is an evaluation Module for the DGN (8-pin MSOP power pad) package.

The THS4631EVM's are designed to demonstrate the functionality and versatility of the device. The EVM is ready for power, signal source, and test instruments.

The THS4631 evaluation module (EVM) User's Guide is included within (...)

Features
  • Configured with 50 ohms input/output impedance.  
  • Decoupling capacitors
  • Connectors: Vs+, GND, Vs-, J1J2, J3 and test points.
  • Input and Output signals are via SMA connectors.
  • Power connectors are via banana jack.

Design tools & simulation

SIMULATION MODEL Download
SLOC051E.ZIP (24 KB) - PSpice Model
SIMULATION MODEL Download
SLOC127B.TSC (20 KB) - TINA-TI Reference Design
SIMULATION MODEL Download
SLOM248A.ZIP (4 KB) - TINA-TI Spice Model
SIMULATION TOOL Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
SIMULATION TOOL Download
SPICE-based analog simulation program
TINA-TI TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
document-generic User guide
CALCULATION TOOL Download
Analog engineer's calculator
ANALOG-ENGINEER-CALC — The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
Features
  • Expedites circuit design with analog-to-digital converters (ADCs) and digital-to-analog converters (DACs)
    • Noise calculations
    • Common unit translation
  • Solves common amplifier circuit design problems
    • Gain selections using standard resistors
    • Filter configurations
    • Total noise for common amplifier configurations
  • (...)
CALCULATION TOOL Download
Voltage Divider Determines A Set of Resistors for a Voltage Divider
VOLT-DIVIDER-CALC VOLT-DIVIDER-CALC quickly determines a set of resistors for a voltage divider. This KnowledgeBase Javascript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. This calculator can also be used to design non-inverting attentuation circuits.

(...)

CAD/CAE symbols

Package Pins Download
HVSSOP (DGN) 8 View options
SO PowerPAD (DDA) 8 View options
SOIC (D) 8 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos