TMP421-Q1

ACTIVE

AEC-Q100 Automotive 1Ch Remote Temperature Sensor

Top

Product details

Parameters

Local sensor accuracy (Max) (+/- C) 1.5 Product type Remote Operating temperature range (C) -40 to 125 Supply voltage (Min) (V) 2.7 Interface type I2C, SMBus, 2-Wire Supply voltage (Max) (V) 5.5 Supply current (Max) (uA) 38 Temp resolution (Max) (bits) 12 Features One-shot conversion Remote channels (#) 1 Addresses 9 Rating Automotive open-in-new Find other Digital temperature sensors

Package | Pins | Size

SOT-23 (DCN) 8 8 mm² 2.9 x 2.8 open-in-new Find other Digital temperature sensors

Features

  • AEC-Q100 Qualified with the Following Results
    • Temperature Grade 1: –40°C to +125°C
    • Device HBM ESD Classification Level 2
    • Device CDM ESD Classification Level C5
  • SOT23-8 Package
  • ±1°C Remote Diode Sensor (Maximum)
  • ±1.5°C Local Temperature Sensor (Maximum)
  • Series Resistance Cancellation
  • n-Factor Correction
  • Two-Wire I2C or SMBus™ Compatible Serial Interface
  • Multiple Interface Addresses
  • Diode Fault Detection
  • RoHS Compliant and No Sb/Br
open-in-new Find other Digital temperature sensors

Description

The TMP421-Q1, TMP422-Q1, and TMP423-Q1 devices are single, dual, and triple remote, automotive-qualified temperature sensor monitors with a built-in local temperature sensor. The remote temperature sensor diode-connected transistors are typically low-cost, NPN- or PNP-type transistors or diodes that are an integral part of microcontrollers, microprocessors, or field-programmable gate arrays (FPGAs).

Remote accuracy is ±1°C for multiple device manufacturers, with no calibration needed. The two-wire serial interface accepts SMBus write byte, read byte, send byte, and receive byte commands to configure the device.

The TMP421-Q1, TMP422-Q1, and TMP423-Q1 include series resistance cancellation, programmable non-ideality factor, wide remote temperature measurement range (up to +150°C), and diode fault detection.

The TMP421-Q1, TMP422-Q1, and TMP423-Q1 are all available in an 8-pin SOT-23 package.

open-in-new Find other Digital temperature sensors
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 5
Type Title Date
* Datasheet TMP42x-Q1 ±1°C Remote and Local Temperature Sensor datasheet Nov. 29, 2016
Technical articles How to choose the right thermistor for your temperature sensing application Feb. 12, 2020
Technical articles How to enable thermal safety for automotive infotainment and cluster systems Oct. 15, 2019
Technical articles Driving industrial innovation with small-size sensors Sep. 12, 2019
Technical articles How sensor technology is evolving to meet cold chain needs Jun. 18, 2018

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Software development

DRIVERS & LIBRARIES Download
Linux Driver for TMP421
TMP421SW-LINUX The Linux driver supports the TMP421 series of Remote and Local Temp Sensors. The Linux driver supports communication through the I2C bus and interfaces with the Hardware Monitoring sub-system.
Linux Mainline Status

Available in Linux Main line: Yes
Available through git.ti.com: N/A

Supported Devices:
  • (...)

CAD/CAE symbols

Package Pins Download
SOT-23 (DCN) 8 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos