Top

Product details

Parameters

Function Type-C, USB2 Type PD controller, Passive switch Power role DRP, Sink, Source Alternate mode Yes External power path control GPIO, NFET Data role DFP, DRD, UFP Internal power path 20V 3A Source/Sink, 5V 3A Source, 5V 600mA VCONN USB speed (Mbps) 480 Rating Catalog Dead battery support Yes Operating temperature range (C) -10 to 85 Iq (Typ) (uA) 58 open-in-new Find other USB Type-C & USB Power Delivery ICs

Package | Pins | Size

NFBGA (ZBH) 96 36 mm² 6 x 6 open-in-new Find other USB Type-C & USB Power Delivery ICs

Features

  • USB Power Delivery (PD) controller
    • Mode configuration for source (Host), sink (Device), or source-sink
    • Bi-Phase marked encoding/decoding (BMC)
    • Physical layer (PHY) protocol
    • Policy engine
    • Configurable at boot and host-controlled
  • USB Type-C specification compliant
    • Detect USB cable plug attach
    • Cable orientation and role detection
    • Assign CC and VCONN pins
    • Advertise default, 1.5-A or 3-A current for 5-V USB Type-C power
  • Port power switch
    • 5-V, 3-A Switch to VBUS for Type-C power
    • 5-V to 20-V, 3-A Bidirectional switch to or from VBUS for USB PD power
    • 5-V, 600-mA Switches for VCONN
    • Overcurrent limiter, overvoltage protector
    • PD Slew rate control and hard reset support
  • Port data multiplexer
    • USB 2.0 HS data, UART data, and low speed endpoint
    • Sideband use data for alternate modes (DisplayPort and Thunderbolt™)
  • Power management
    • Gate control and current sense for external 5-V to 20-V, 5-A bidirectional NFET switch
    • Power supply from 3.3-V or VBUS source
    • 3.3-V LDO output for dead battery support
  • BGA MicroStar Junior package
    • 0.5-mm Pitch
    • Through-Hole via compatible for all pins
  • UL Recognized: E169910 and E339631
    • Standards used: 2367
  • IEC certification: NO88109
    • Standards used: 60950-1(ed.2);am1;am2

All trademarks are the property of their respective owners.

open-in-new Find other USB Type-C & USB Power Delivery ICs

Description

The TPS65982 device is a stand-alone USB Type-C and power delivery (PD) controller providing cable-plug and orientation detection at the USB Type-C connector. Upon cable detection, the TPS65982 device communicates on the CC wire using the USB PD protocol. After successful USB PD negotiation is complete, the TPS65982 enables the appropriate power path and configures alternate mode settings for internal and (optional) external multiplexers.

The mixed-signal front end on the CC pins advertises default, 1.5 A or 3 A for USB Type-C power sources, detects a plug event and determines the Type-C cable orientation, and autonomously negotiates USB PD contracts using bi-phase marked coding (BMC) and the physical layer (PHY) protocol.

The port power switch provides up to 3 A downstream at 5 V for legacy and Type-C USB power. An additional bidirectional switch path provides USB PD power up to 3 A at a maximum of 20 V as either a source (host), sink (device), or source-sink.

The TPS65982 is also an upstream-facing port (UFP), downstream-facing port (DFP), or dual-role port for data. The port data multiplexer passes data to or from the top or bottom D+/D– signal pair at the port for USB 2.0 HS; additionally, the Sideband-Use (SBU) signal pair is used for Alternate Modes. The power management circuitry supports dead battery or no-battery operation using VBUS as a primary power supply when 3.3 V is not available.

open-in-new Find other USB Type-C & USB Power Delivery ICs
Download
Similar products you might be interested in
open-in-new Compare products
Similar but not functionally equivalent to the compared device:
NEW TPS25750 PREVIEW Highly integrated USB Type-C® and USB PD controller with pre-configured GUI TPS25750 is optimized for power-only USB Type-C PD applications
TPS65987D ACTIVE USB Type-C™ and USB PD controller with integrated power switches TPS65982 supports PD 2.0 only which is no longer being certified by the USB-IF. TPS65987D is a PD 3.0 controller and should be used for new designs.

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 26
Type Title Date
* Datasheet TPS65982 USB Type-C and USB PD Controller, Power Switch, and High-Speed Multiplexer datasheet (Rev. D) Apr. 02, 2019
Application notes TPS6598x Power and Data Role Swaps (Rev. A) Apr. 17, 2019
Application notes TPS6598x Thunderbolt Alternate Mode (Rev. A) Sep. 04, 2018
User guides TPS6598x Application Customization Tool (Rev. B) Jul. 31, 2018
Application notes TPS6598x DisplayPort Alternate Mode (Rev. B) Jul. 31, 2018
Application notes TPS6598x OCP Mechanism and Programming Guide Oct. 23, 2017
Application notes TPS65982 FW Update from Embedded Controller Over I2C (Rev. A) Apr. 26, 2017
Application notes TPS6598x PDIO Alternate Mode Feb. 13, 2017
User guides TPS65981, TPS65982, and TPS65986 Host Interface Technical Reference Manual (Rev. A) Feb. 06, 2017
Technical articles Upgrading USB chargers from Type-A to Type-C Jan. 17, 2017
Technical articles How to correct 10Gbps performance issues with a USB Type-C™ active redriver multiplexer Dec. 01, 2016
Application notes TPS6598x GPIO Events Nov. 17, 2016
White papers A primer on USB Type-C and Power Delivery applications and requirements Nov. 15, 2016
Application notes TPS6598x PD Power Negotiations Nov. 15, 2016
Application notes TPS6598x User Alternate Modes Nov. 10, 2016
Technical articles Why use a USB Type-C™ redriver in your personal electronics designs? Oct. 25, 2016
White papers Circuit protection for your next USB Type-C™ design White Paper Oct. 12, 2016
Technical articles What is the USB Type-C and Power Delivery minidock and what does it do? Oct. 07, 2016
User guides TPS65981, TPS65982, and TPS65986 Firmware User’s Guide (Rev. B) Jul. 20, 2016
Application notes Using a TPS6598x-EVM to Emulate Type-C and Power Delivery Products (Rev. A) Jul. 06, 2016
Application notes TPS65982 Designs for Supporting Voltages in USB-PD 'Power Rules' Jun. 06, 2016
Application notes TPS65982 charging port over USB Type-C Apr. 19, 2016
White papers USB Type-C™ represents breakthrough connectivity Dec. 04, 2015
Application notes TPS65982 and TPS65986 Quick Start and System Bring Up (Rev. A) Nov. 11, 2015
User guides TPS65982 Evaluation Module User's Guide (Rev. C) Oct. 29, 2015
White papers Transition existing products from USB 2.0 OTG to USB Type-C Jul. 10, 2015

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
299
Description

This EVM was developed prior to the USB Power Delivery Specification change back in March 2016 and therefore does not have the native hardware to support the 5, 9, 15 and 20V rails. In order to follow the new source power rules please refer to TPS65982 Designs for Supporting Voltages in USB-PD (...)

Features
  • USB Type-C testing and verification
  • USB Power Delivery testing and verification
  • Application Emulation (Notebook, Dock, Dongle, Charger)
  • Powered from single supply and bus-powered capable
EVALUATION BOARDS Download
document-generic User guide
199
Description
TUSB1042EVM is a functional board design of a linear redriver switch (TUSB1042) from a Type-C connector to a legacy Type B USB receptacle to connect to USB host systems using the TPS65982 controller for power delivery and CC pin control. The TUSB1042 equalization is easy to configure using the (...)
Features
  • Plug and play design
  • Easy configurable though jumpers and switches
  • No external power through 5V DC IN is required
  • The TPS65982 is configurable though a SPI flash
EVALUATION BOARDS Download
document-generic User guide
199
Description

The TUSB1046 USB Type-C™ Alternate Mode Redriver Switch Evaluation Module (TUSB1046EVM) provides a USB Type-C Alternate Mode redriver switch that enables 10Gbps USB data and 8.1Gbps DisplayPort™ video over a USB Type-C downstream facing port (host) interface.  The EVM features a (...)

Features
  • Plug and play design
  • operate in DFP, UFP or DRP mode via I2C control
  • Selectable via DIP Switch configuration
  • Used with a legacy USB systems or Type-C systems for evaluation purposes
  • No external power through 5V DC IN is required
EVALUATION BOARDS Download
document-generic User guide
199
Description

The TUSB546 USB Type-C™ Alternate Mode Redriver Switch Evaluation Module (TUSB546EVM) provides a USB Type-C Alternate Mode redriver switch that enables 5Gbps USB data and 8.1Gbps DisplayPort™ video over a USB Type-C downstream facing port (host) interface.  The EVM features a (...)

Features
  • Plug and play design
  • Operate in DFP, UFP or DRP mode via I2C control
  • Selectable via DIP Switch configuration
  • Used with a legacy USB systems or Type-C systems for evaluation purposes
  • No external power through 5V DC IN is required
EVALUATION BOARDS Download
document-generic User guide
499
Description

The USB Type-C™ and Power Delivery (PD) MiniDock evaluation module (EVM) provides a complete reference solution for a USB Type-C dock including audio, USB data, power and video.  The EVM has a small 2-inch by 4-inch form factor and supports both source and sink power capabilities over the (...)

Features
  • Plug-and-play design
  • Bidirectional power capabilities
  • DRP full-featured USB-C & PD port
  • Dual video (up to 4K) through HDMI or miniDP
  • Flash update over Type-C

Software development

IDES, CONFIGURATION, COMPILERS & DEBUGGERS Download
TPS6598x configuration tool
TPS6598X-CONFIG What you need to get started:

Step 1: Watch the TPS6598X GUI tool videos
Step 2: Download the TPS6598X GUI
Step 3: Order the USB-C-PD-DUO-EVM and read the user's guide
Step 4: Watch the EVM Tutorial


The TPS6598x configuration tool assists in the design phase by providing a GUI interface to configure (...)

Features
  • Update a preexisting firmware image or start with a default configuration
  • Migrate the configuration of a previous firmware revision to the latest firmware release
  • Configure a variety of settings
    • Data port roles
    • Power port role
    • Power profiles
    • Alternate modes such as DisplayPort
    • GPIO mappings
  • Save in a (...)
PROGRAMMING TOOLS Download
TPS6598X Host Interface Utility Tool
TPS65982-HIUTILITY The TPS6598X Utilities Tool is a set of python scripts used to interact with the TPS65982 and TPS65986 USB Type-C and PD controllers using the device’s Host Interface and an external Windows-based computer. This interface provides a rich variety of functions for both controlling the TPS65982 (...)
Features
  • Easy way to prototype custom port controller behavior
  • Simple-to-use debugging through status register readout
  • A variety of python scripts to interact with the TPS65982 and TPS65986's Host Interface:
    • Read the Host Interface Registers
    • Update the application firmware image
    • Update just region 0 or region 1 of (...)

Design tools & simulation

SIMULATION MODELS Download
SLVMAY7A.ZIP (73 KB) - IBIS Model
SIMULATION TOOLS Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
SIMULATION TOOLS Download
SPICE-based analog simulation program
TINA-TI TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
document-generic User guide
CAD/CAE SYMBOLS Download
SLVRBE2.ZIP (12 KB)

Reference designs

REFERENCE DESIGNS Download
USB Type-C & USB PD Controller Power Switch & High Speed Multiplexer Reference Design
TIDA-00714 The TIDA-00714 TI Design is a complete TPS65982 based reference design for USB Type-C and Power Delivery applications. It allows the user to develop various power profiles and alternate modes such as DisplayPort and debug existing USB Type-C and Power Delivery systems.
document-generic Schematic
REFERENCE DESIGNS Download
USB Type-C HDD With USB Power Delivery Reference Design
TIDA-00882 This reference design uses Texas Instrument's SuperSpeed USB 3.0 to SATA bridge, USB Type-CTM and USB PD controller with integrated power switch and High-Speed USB mux, and SuperSpeed USB 3.1 mux to demonstrate the subsystems required to implement a Type-C external hard disk drive capable of (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
USB Type-C™ and Power Delivery Minidock With Video and Charging Support Reference Design
TIDA-01243 — The USB Type-C™ and Power Delivery (PD) minidock evaluation module (EVM) provides a complete reference solution for a USB Type-C dock including audio, USB data, power, and video.  The EVM has a small 2 inch by 4 inch  form factor and supports  both source and sink power (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
USB Type-C Audio Adapter Accessory Mode Reference Design
TIDA-00565 — The USB Type-C™ audio adapter accessory mode reference design provides the solution for transmitting analog audio through the USB Type-C interface.  This reference design demonstrates how analog audio can be transmitted to system peripherals using the USB Type-C standard audio adapter (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
TI USB Type-C Dock Reference Design
TIDA-00630 The Type-C Dock Board is designed to help evaluate Type-C Dock implementations with video and charging support.  The Type-C Dock offers data and video port expansion and a charging capability for Type-C systems that support USB PD/Alternate mode protocol.  The dock comes with three (...)
document-generic Schematic

CAD/CAE symbols

Package Pins Download
BGA MICROSTAR JUNIOR (ZQZ) 96 View options
NFBGA (ZBH) 96 View options

Ordering & quality

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos