Home Wireless connectivity Long range Sub-1 GHz products Sub-1 GHz wireless MCUs
Home
Wireless connectivity
Long range Sub-1 GHz products
Sub-1 GHz wireless MCUs

CC1314R10

ACTIVE

SimpleLink™ Arm® Cortex®-M33 Sub-1 GHz wireless MCU with 1-MB flash and up to 296 kB of SRAM

Order now
Data sheet
User guides
Errata

CC1314R10

ACTIVE
Data sheet Order now

Product details

Protocols 6LoWPAN, Amazon Sidewalk, IEEE 802.15.4, MIOTY, Proprietary, Wi-SUN, Wireless M-Bus Modulation scheme (G)MSK, 2(G)FSK, 4(G)FSK, ASK, OOK Frequency bands 1076-1315, 287-351, 359-439, 431-527, 861-1054 Type Wireless MCU TX power (max) (dBm) 14 RAM (kByte) 296 Flash memory (kByte) 1024 Security Arm® TrustZone® technology, Cryptographic acceleration, Device attestation & anti-counterfeit, Hardware-enforced isolation, PSA level 1 and 2 ready, Secure boot, Secure communication, Secure debug, Secure firmware & software update, Secure provisioning, Secure storage, Software IP protection Cryptographic accelerators AES, ECC, PKA, SHA-2, TRNG CPU Arm® Cortex®-M33 Operating system FreeRTOS, RTOS, TI RTOS Peripherals 12-bit ADC 8-channel, 2 comparators, 4 SPI, 4 UART, 4 timers, 8-bit DAC, I2C, I2S, Sensor controller Number of GPIOs 30, 46 Rating Catalog Operating temperature range (°C) -40 to 105
Protocols 6LoWPAN, Amazon Sidewalk, IEEE 802.15.4, MIOTY, Proprietary, Wi-SUN, Wireless M-Bus Modulation scheme (G)MSK, 2(G)FSK, 4(G)FSK, ASK, OOK Frequency bands 1076-1315, 287-351, 359-439, 431-527, 861-1054 Type Wireless MCU TX power (max) (dBm) 14 RAM (kByte) 296 Flash memory (kByte) 1024 Security Arm® TrustZone® technology, Cryptographic acceleration, Device attestation & anti-counterfeit, Hardware-enforced isolation, PSA level 1 and 2 ready, Secure boot, Secure communication, Secure debug, Secure firmware & software update, Secure provisioning, Secure storage, Software IP protection Cryptographic accelerators AES, ECC, PKA, SHA-2, TRNG CPU Arm® Cortex®-M33 Operating system FreeRTOS, RTOS, TI RTOS Peripherals 12-bit ADC 8-channel, 2 comparators, 4 SPI, 4 UART, 4 timers, 8-bit DAC, I2C, I2S, Sensor controller Number of GPIOs 30, 46 Rating Catalog Operating temperature range (°C) -40 to 105
VQFN (RGZ) 48 49 mm² 7 x 7 VQFN (RSK) 64 64 mm² 8 x 8

Wireless microcontroller

  • Powerful 48MHz Arm Cortex-M33 processor with TrustZone
  • FPU and DSP extension
  • 1024kB flash program memory
  • 8kB of cache SRAM
  • 256kB of ultra-low leakage SRAM with parity for high-reliability operation
    • ­32kB of additional SRAM if parity is disabled
  • Dynamic multiprotocol manager (DMM) driver
  • Supports over-the-air update (OTA)

Ultra-low power sensor controller

  • Autonomous MCU with 4kB of SRAM
  • Sample, store, and process sensor data
  • Fast wake-up for low-power operation
  • Software defined peripherals; capacitive touch, flow meter, LCD

Low power consumption

  • MCU consumption:
    • 3.4mA active mode, CoreMark
    • 71µA/MHz running CoreMark
    • 0.98µA standby mode, RTC, 256kB SRAM
    • 0.17µA shutdown mode, wake-up on pin
  • Ultra-low-power sensor controller consumption
    • 32µA in 2MHz mode
    • 849µA in 24MHz mode
  • Radio consumption:
    • 5.8mA RX at 868MHz
    • 25.8mA TX at +14dBm at 868MHz

Wireless protocol support

High-performance radio

  • -­121dBm for 2.5kbps long-range mode
  • -­110dBm at 50kbps, 802.15.4, 868MHz

Regulatory compliance

  • Designed for systems targeting compliance with these standards:
    • ETSI EN 300 220 Receiver Cat. 1.5 and 2, EN 303 131, EN 303 204
    • FCC CFR47 Part 15
    • ARIB STD-T108 and STD-T67

MCU peripherals

  • Most digital peripherals can be routed to any GPIO
  • Four 32-bit or eight 16-bit general-purpose timers
  • 12-bit SAR ADC, 200ksps, 8 channels
  • 8-bit DAC
  • Two comparators
  • Programmable current source
  • Four UART, four SPI, two I2C, one I2S
  • Real-time clock (RTC)
  • Integrated temperature and battery monitor

Security enablers

  • Supports secure boot
  • Supports secure key storage and device ID
  • Arm TrustZone for a trusted execution environment
  • AES 128-bit and 256-bit cryptographic accelerator
  • Public key accelerator
  • SHA2 accelerator (full suite up to SHA-512)
  • True random number generator (TRNG)
  • Secure debug lock
  • Software anti-rollback protection

Development tools and software

Operating range

  • On-chip buck DC/DC converter
  • 1.8V to 3.8V single supply voltage
  • -40°C to +105°C

Package

  • 7mm × 7mm RGZ VQFN48 (30 GPIOs)
  • 8mm × 8mm RSK VQFN64 (46 GPIOs)
  • RoHS-compliant package

Wireless microcontroller

  • Powerful 48MHz Arm Cortex-M33 processor with TrustZone
  • FPU and DSP extension
  • 1024kB flash program memory
  • 8kB of cache SRAM
  • 256kB of ultra-low leakage SRAM with parity for high-reliability operation
    • ­32kB of additional SRAM if parity is disabled
  • Dynamic multiprotocol manager (DMM) driver
  • Supports over-the-air update (OTA)

Ultra-low power sensor controller

  • Autonomous MCU with 4kB of SRAM
  • Sample, store, and process sensor data
  • Fast wake-up for low-power operation
  • Software defined peripherals; capacitive touch, flow meter, LCD

Low power consumption

  • MCU consumption:
    • 3.4mA active mode, CoreMark
    • 71µA/MHz running CoreMark
    • 0.98µA standby mode, RTC, 256kB SRAM
    • 0.17µA shutdown mode, wake-up on pin
  • Ultra-low-power sensor controller consumption
    • 32µA in 2MHz mode
    • 849µA in 24MHz mode
  • Radio consumption:
    • 5.8mA RX at 868MHz
    • 25.8mA TX at +14dBm at 868MHz

Wireless protocol support

High-performance radio

  • -­121dBm for 2.5kbps long-range mode
  • -­110dBm at 50kbps, 802.15.4, 868MHz

Regulatory compliance

  • Designed for systems targeting compliance with these standards:
    • ETSI EN 300 220 Receiver Cat. 1.5 and 2, EN 303 131, EN 303 204
    • FCC CFR47 Part 15
    • ARIB STD-T108 and STD-T67

MCU peripherals

  • Most digital peripherals can be routed to any GPIO
  • Four 32-bit or eight 16-bit general-purpose timers
  • 12-bit SAR ADC, 200ksps, 8 channels
  • 8-bit DAC
  • Two comparators
  • Programmable current source
  • Four UART, four SPI, two I2C, one I2S
  • Real-time clock (RTC)
  • Integrated temperature and battery monitor

Security enablers

  • Supports secure boot
  • Supports secure key storage and device ID
  • Arm TrustZone for a trusted execution environment
  • AES 128-bit and 256-bit cryptographic accelerator
  • Public key accelerator
  • SHA2 accelerator (full suite up to SHA-512)
  • True random number generator (TRNG)
  • Secure debug lock
  • Software anti-rollback protection

Development tools and software

Operating range

  • On-chip buck DC/DC converter
  • 1.8V to 3.8V single supply voltage
  • -40°C to +105°C

Package

  • 7mm × 7mm RGZ VQFN48 (30 GPIOs)
  • 8mm × 8mm RSK VQFN64 (46 GPIOs)
  • RoHS-compliant package

The SimpleLink™CC1314R10 device is a low-power, Sub-1GHz wireless microcontroller (MCU) targeting applications needing enhanced security, on-chip over-the-air update capability, and support for advanced applications or large wireless protocols. It supports IEEE 802.15.4, IPv6-enabled smart objects (6LoWPAN), Wireless M-Bus, Wi-SUN, Amazon Sidewalk, mioty , and proprietary systems, including the TI 15.4-Stack (Sub-1GHz). The device is optimized for low-power wireless communication and advanced sensing in building security systems, HVAC, smart meters, medical, wired networking, gateways and grid communications, home theater and entertainment, and connected peripherals markets. The highlighted features of this device include:

  • Arm TrustZone based secure key storage, device ID, and trusted functions support.
  • Flexible Sub-1 GHz radio supporting industry standard frequency bands (315MHz, 433MHz, 868MHz, 915MHz, and more) to meet industrial needs.
  • Wide flexibility of protocol stack support in the SimpleLink LOWPOWER F2 Software Development Kit (SDK) including Wi-SUN, Amazon Sidewalk, and SimpleLink™ 15.4-Stack (Sub-1GHz).
  • Maximum transmit power of +14dBm at Sub-1GHz with 25.8mA current consumption.
  • Longer battery life wireless applications with a low standby current of 0.98µA and full SRAM retention.
  • Industrial temperature ready with lowest standby current of approximately 13µA at 105⁰C (with full SRAM retention).
  • Advanced sensing with a programmable, autonomous ultra-low power Sensor Controller CPU with fast wake-up capability. As an example, the sensor controller is capable of 1Hz ADC sampling at 1.2µA system current.
  • Low Soft Error Rate (SER) Failure-in-time (FIT) for long operation lifetime with no disruption for industrial markets with always-on SRAM parity against corruption due to potential radiation events.
  • Dedicated software-controlled radio controller (Arm Cortex-M0) providing flexible low-power RF transceiver capability to support multiple physical layers and RF standards.
  • Excellent radio sensitivity (–121dBm) and robustness (selectivity and blocking) performance for SimpleLink™ long-range mode.

The CC1314R10 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub-1GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more details, see the SimpleLink MCU platform.

In addition to the software compatibility, within the Sub-1GHz wireless MCUs, there is pin-to-pin compatibility from 32kB of flash up to 1MB of flash in the 7mm × 7mm QFN package for maximum design scalability. For more information on TI’s Sub-1GHz devices, see www.ti.com/sub1ghz.

The SimpleLink™CC1314R10 device is a low-power, Sub-1GHz wireless microcontroller (MCU) targeting applications needing enhanced security, on-chip over-the-air update capability, and support for advanced applications or large wireless protocols. It supports IEEE 802.15.4, IPv6-enabled smart objects (6LoWPAN), Wireless M-Bus, Wi-SUN, Amazon Sidewalk, mioty , and proprietary systems, including the TI 15.4-Stack (Sub-1GHz). The device is optimized for low-power wireless communication and advanced sensing in building security systems, HVAC, smart meters, medical, wired networking, gateways and grid communications, home theater and entertainment, and connected peripherals markets. The highlighted features of this device include:

  • Arm TrustZone based secure key storage, device ID, and trusted functions support.
  • Flexible Sub-1 GHz radio supporting industry standard frequency bands (315MHz, 433MHz, 868MHz, 915MHz, and more) to meet industrial needs.
  • Wide flexibility of protocol stack support in the SimpleLink LOWPOWER F2 Software Development Kit (SDK) including Wi-SUN, Amazon Sidewalk, and SimpleLink™ 15.4-Stack (Sub-1GHz).
  • Maximum transmit power of +14dBm at Sub-1GHz with 25.8mA current consumption.
  • Longer battery life wireless applications with a low standby current of 0.98µA and full SRAM retention.
  • Industrial temperature ready with lowest standby current of approximately 13µA at 105⁰C (with full SRAM retention).
  • Advanced sensing with a programmable, autonomous ultra-low power Sensor Controller CPU with fast wake-up capability. As an example, the sensor controller is capable of 1Hz ADC sampling at 1.2µA system current.
  • Low Soft Error Rate (SER) Failure-in-time (FIT) for long operation lifetime with no disruption for industrial markets with always-on SRAM parity against corruption due to potential radiation events.
  • Dedicated software-controlled radio controller (Arm Cortex-M0) providing flexible low-power RF transceiver capability to support multiple physical layers and RF standards.
  • Excellent radio sensitivity (–121dBm) and robustness (selectivity and blocking) performance for SimpleLink™ long-range mode.

The CC1314R10 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub-1GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more details, see the SimpleLink MCU platform.

In addition to the software compatibility, within the Sub-1GHz wireless MCUs, there is pin-to-pin compatibility from 32kB of flash up to 1MB of flash in the 7mm × 7mm QFN package for maximum design scalability. For more information on TI’s Sub-1GHz devices, see www.ti.com/sub1ghz.
filter Find other Sub-1 GHz wireless MCUs
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 45
Top documentation Type Title Format options Date
* Data sheet CC1314R10 SimpleLink™ High-Performance Sub-1 GHz Wireless MCU datasheet (Rev. B) 30 Apr 2024
* Errata CC1314R10 SimpleLink™ Wireless MCU Device Revision C (Rev. B) 21 Nov 2024
* User guide CC13x4, CC26x4 SimpleLink™ Wireless MCU Technical Reference Manual PDF | HTML 23 Mar 2023
Application note How to Modify TX and RX Commands Imported/Exported from SysConfig or SmartRF™ Studio PDF | HTML 30 Apr 2026
Application note TI Wi-SUN® Network Performance PDF | HTML 01 Aug 2025
Product overview TI Wi-SUN® FAN Stack - Software Overview (Rev. B) PDF | HTML 09 Jun 2025
Application note CC2538, CC13xx, and CC26xx Serial Bootloader Interface (Rev. E) PDF | HTML 06 Aug 2024
Application note CC13xx/CC26xx Hardware Configuration and PCB Design Considerations (Rev. H) PDF | HTML 02 May 2024
User guide SimpleLink CC131x and CC135x Family Hardware Migration Guide PDF | HTML 02 May 2024
Application brief Wireless Technologies for Solar Micro Inverters and Trackers (Rev. A) PDF | HTML 09 Apr 2024
Application note TI 15.4-Stack Software PDF | HTML 17 Oct 2023
Application brief Wireless MCUs Designed to Meet Complex IoT Requirements PDF | HTML 12 Jul 2023
Application note Antenna Impedance Measurement and Matching PDF | HTML 22 Mar 2022
Application note 433 to 930-MHz and 2.4-GHz BOM Tunable PCB Antenna PDF | HTML 07 Feb 2022
Application note Connect One TI 15.4 Stack Sensor to Multiple Gateways PDF | HTML 20 Dec 2021
Technical article 4 questions to ask before choosing a Wi-SUN stack PDF | HTML 13 Aug 2021
More literature Webinar: Wireless mesh networking 04 Mar 2021
Technical article How Wi-SUN® FAN improves connected infrastructures PDF | HTML 19 Nov 2020
Technical article How TI helps expand connectivity beyond the front door with Amazon Sidewalk PDF | HTML 21 Sep 2020
Application note Finding Settings for New Phy’s for the CC13x0 and CC13x2 Family PDF | HTML 14 Sep 2020
Application note CC13xx IQ Samples (Rev. B) PDF | HTML 24 Aug 2020
Application note Cloning Z-Stack Network Properties Using the SimpleLink Wireless MCU Family PDF | HTML 31 Mar 2020
Application note Cryptographic Performance and Energy Efficiency on SimpleLink CC13x2/CC26x2 MCUs PDF | HTML 28 Jan 2020
Application note Ultra-Low Power Sensing Applications With CC13x2/CC26x2 (Rev. B) PDF | HTML 27 Jan 2020
White paper Simple and efficient software development with the SimpleLink™ MCU platform (Rev. E) 06 Dec 2019
White paper Deep dive into the tools and development kits of the SimpleLink™ MCU platform (Rev. B) 25 Sep 2019
Technical article Designing a building security system with the Sub-1 GHz Linux Gateway Software Dev PDF | HTML 25 Sep 2019
More literature Understanding security features for SimpleLink™ Sub-1 GHz CC13x2 MCUs 17 Jun 2019
Application note Debugging Communication Range (Rev. A) PDF | HTML 23 May 2019
Application note Secure Boot in SimpleLink™ CC13x2/CC26x2 Wireless MCUs 15 Apr 2019
Product overview Out-of-box star-network solution: TI 15.4-Stack 14 Jan 2019
Application note Measuring CC13xx and CC26xx current consumption (Rev. D) PDF | HTML 10 Jan 2019
Application note RF PCB Simulation Cookbook 09 Jan 2019
Product overview Meet the SimpleLink™ Sensor Controller 04 Jan 2019
Product overview Time Multiplexing: Concurrent Multi-standard Operation 03 Jan 2019
White paper Migrating your proprietary solution to the SimpleLink™ WMCU 07 Nov 2018
Product overview Electronic Smart Locks: Ultra-low power and Multi-Standard operation 05 Nov 2018
Technical article Unlock every door with the SimpleLink™ platform PDF | HTML 19 Sep 2018
Application note Low-Power ADC Solution for CC13x2 and CC26x2 02 Mar 2018
Application brief Single-Chip Flow Metering Solution With the CC13x2R Wireless MCUs 27 Feb 2018
Application brief Ultra-Low Power Designs With the CC13x2 and CC26x2 Sensor Controller 27 Feb 2018
Application note Hardware Migration From CC1310 to CC1312R 17 Oct 2017
Application note Sensor Sequencing Using the CC13x2 and CC26x2 Sensor Controller 05 Mar 2017
Application note TI-15.4 Stack Frequency Hopping Mode FCC Compliance (Rev. A) 28 Feb 2017
User guide TI-RTOS 2.20 for CC13xx/CC26xx SimpleLink Getting Started Guide (Rev. D) 17 Jun 2016

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

RDCR-3P-RADIO-MOD — Radiocrafts embedded radio modules

Radiocrafts’ standard RF modules provide compact, easy-to-use, low cost, low power and high-performance RF solutions for a large number of wireless applications using license-free ISM bands (169 MHz – 2.4 GHz). Using modules, OEM manufacturers without RF design knowledge can easily add (...)
From: Radiocrafts AS
Visit partner site
Daughter card

BDE-3P-SUB1GHZ — BDE sub-1GHz modules

BDE Technology, Inc. is a TI-certified third-party module provider. Based on TI's CC1XXX sub-1GHz wireless connectivity products, BDE's modules allow customers to shorten development cycles, reduce design uncertainty, lower product cost and release efficiently launch competitive products. BDE (...)

From: BDE Technology Inc.
View Options
Debug probe

TMDSEMU110-U — XDS110 JTAG Debug Probe

The Texas Instruments XDS110 is a new class of debug probe (emulator) for TI embedded processors. The XDS110 replaces the XDS100 family while supporting a wider variety of standards (IEEE1149.1, IEEE1149.7, SWD) in a single pod. Also, all XDS debug probes support Core and System Trace in all (...)

User guide: PDF
Not available on TI.com
Debug probe

TMDSEMU200-U — XDS200 USB Debug Probe

The XDS200 is a debug probe (emulator) used for debugging TI embedded devices. For the majority of devices it is recommended to use the newer, lower cost XDS110 (www.ti.com/tool/TMDSEMU110-U). The XDS200 supports a wide variety of standards (IEEE1149.1, IEEE1149.7, SWD) in a single pod. All XDS (...)

Not available on TI.com
Debug probe

LB-3P-TRACE32-WIRELESS — Lauterbach TRACE32® Debug System for Wireless Connectivity

Lauterbach‘s TRACE32® tools are a suite of leading-edge hardware and software components that enables developers to analyze, optimize and certify many of TI's Wireless Connectivity chips. The globally renowned debug solutions for embedded systems are the perfect solution for all development phases (...)

From: Lauterbach GmbH
View Options
Development kit

LP-EM-CC1314R10 — CC1314R10 LaunchPad™ development kit for SimpleLink™ Sub-1 GHz wireless MCU

This LaunchPad development kit is used to speed development with the SimpleLink Sub-1 GHz wireless MCU with support for Wi-SUN, TI 15.4 stack and proprietary RF protocols.  Software support is provided by the CC13XX-CC26XX software development kit (SDK). This is a split (...)

Not available on TI.com
Development kit

LP-XDS110 — XDS110 LaunchPad™ development kit debugger

The LP-XDS110 LaunchPad development kit debugger is a tool to program and debug Texas Instruments (TI) microcontroller, microprocessors and DSP XDS-compatible devices. The LP-XDS110 has been designed to connect directly to split Launchpads via the 20-pin edge connector, however they can also be (...)

Not available on TI.com
Development kit

LP-XDS110ET — XDS110ET LaunchPad™ development kit debugger with EnergyTrace™ software

The LP-XDS110ET LaunchPad development kit debugger is a tool to program and debug Texas Instruments (TI) microcontrollers, microprocessors and DSP XDS-compatible devices. The LP-XDS110ET has been designed to connect directly to split Launchpad development kits via the 20-pin edge connector, however (...)

Not available on TI.com
Development kit

AMZN-3P-SIDEWALK-TOOLKIT — Amazon Sidewalk development tool kit

Amazon Sidewalk is a secure and reliable community network that covers in-home, in-building, entire neighborhood and even entire city use cases using Amazon Sidewalk Bridges, such as compatible Amazon Echo and Ring devices, to provide cloud connectivity for IoT devices. Amazon Sidewalk enables (...)

From: Amazon
Visit partner site
Software development kit (SDK)

SIMPLELINK-LOWPOWER-F2-SDK — SimpleLink™ Low Power F2 software development kit (SDK) for the CC13x1, CC13x2, CC13x4, CC26x1, CC26x2 and CC26x4 devices

The SimpleLink™ Low Power SDKs support the CC13xx, CC23xx and CC26xx family of products. Together, these SDKs provide comprehensive software packages for the development of Sub-1 GHz and 2.4 GHz applications including support for Bluetooth® Low Energy, Mesh, Zigbee®, Matter, Thread, 802.15.4-based, (...)

Supported products & hardware

Supported products & hardware
Browse Download options
Software development kit (SDK)

TI-15-4-STACK-GATEWAY-LINUX-SDK — TI 15-4-Stack Gateway Linux Software Development Kit

The TI-15.4-Stack-Gateway-Linux Software Development Kit (SDK) provides a Linux software middleware for the TI 15.4-Stack companion solution. It includes a full Linux user-space software that runs on top of the TI Processor SDK for AM335x platform, which interfaces with the co-processor embedded (...)

Supported products & hardware

Supported products & hardware
Download options
Application software & framework

MIOTY — Protocol software for MIOTY technology

To get started evaluating MIOTY® protocol software with the LaunchPad SensorTag kit:
  1. Buy one or more CC1352R SensorTag Kit
  2. Buy one CC1352R1 LaunchPad development kit
  3. Download the SimpleLink™ software development kit
  4. For MIOTY stack development contact Stackforce
  5. Order a gateway from MIOTY


(...)

Download
Getting started

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
Supported products & hardware

Supported products & hardware
Get started
IDE, configuration, compiler or debugger

ARM-CGT — Arm® code generation tools - compiler

The TI Arm® code generation (compiler) tools support development of applications for TI Arm-based platforms, especially those featuring TI Arm Cortex-M and Cortex-R series devices.

The current tools ARM-CGT-CLANG are derived from the open-source Clang compiler and its supporting LLVM (...)

View Options
IDE, configuration, compiler or debugger

SENSOR-CONTROLLER-STUDIO — Sensor Controller Studio

Sensor Controller Studio is used to write, test and debug code for the CC26xx/CC13xx Sensor Controller, enabling ultra-low power application design. The tool generates an interface driver consisting of C source files with the firmware image, associated definitions, and generic functions that allow (...)
View Options
IDE, configuration, compiler or debugger

SYSCONFIG — Standalone desktop version of SysConfig

CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.

SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)

Supported products & hardware

Supported products & hardware
Launch Download options
Online training

SIMPLELINK-ACADEMY-CC13XX-CC26XX — SimpleLink™ CC13xx and CC26xx Academy

SimpleLink™ Academy is an interactive learning experience for TI's wireless protocols. Our hands-on training modules cover all phases of development for LaunchPad™ development kits alongside software development kits (SDKs) in the SimpleLink MCU family.
Supported products & hardware

Supported products & hardware
Browse
Plug-in

SIMPLELINK-SDK-LVGL-PLUGIN — SimpleLink™ software development kit (SDK) LittlevGL plug-in

The SimpleLink™ SDK LVGL Plugin is a companion software package that enables advanced graphics capabilities on various SimpleLink™ MCU platforms by integrating the free and open-source 3rd party library, LittlevGL, into the SimpleLink SDK ecosystem. The Plug-in provides example hardware abstraction (...)
View Options
Software programming tool

FLASH-PROGRAMMER — SmartRF Flash Programmer

SmartRF Flash Programmer 2 can be used to program the flash memory in Texas Instruments ARM based low-power RF wireless MCUs over the debug and serial interfaces. Check the list of supported products for compatibility. Uniflash can also be used to program any SimpleLink product.

SmartRF Flash (...)

View Options
Software programming tool

UNIFLASH — UniFlash flash programming tool

UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.

UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)

View Options
Support software

PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1

The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)

Supported products & hardware

Supported products & hardware
Download
Support software

RF-RANGE-ESTIMATOR — RF Range Estimator

This tool is used to calculate a range estimate for indoor and outdoor RF links using TI wireless devices. The outdoor calculation is based upon Line-of-Sight (LOS). For the indoor estimation, construction materials can be selected that are between the Tx and Rx unit. The greater the attenuation (...)
Supported products & hardware

Supported products & hardware
Download
CAD/CAE symbol

LP-EM-CC1314R10 Design Files

SPRR435.ZIP (4358 KB)
Download
Calculation tool

15.4-STACK-CALC — TI 15.4 Stack Power Calculator

This tool enables SimpleLink TI 15.4 Stack Software users to analyze system power profile for a sleepy network device.  The calculator enables the user to assess the potential system battery life and determine how to optimize power by configuring system settings, stack parameters, payload (...)
View Options
Calculation tool

15.4-STACK-CALC-1.0 — TI 15.4-Stack Power Calculator

This tool enables SimpleLink TI 15.4 Stack Software users to analyze system power profile for a sleepy network device.  The calculator enables the user to assess the potential system battery life and determine how to optimize power by configuring system settings, stack parameters, payload (...)

Supported products & hardware

Supported products & hardware
Download
Calculation tool

SMARTRF-STUDIO-7 — SmartRF Studio 7 application software

SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)

Supported products & hardware

Supported products & hardware
Download options
Design tool

3P-WIRELESS-MODULES — Third party wireless module search tool

The third party wireless module search tool helps developers to identify products that meet their end equipment specifications and procure production ready wireless modules. The third party module vendors included in the search tool are independent third party companies with expertise in designing (...)
Download
Design tool

SIMPLELINK-SUB1GHZ-DESIGN-REVIEWS — Hardware design reviews for SimpleLink™ CC1xxx devices

To get started with the SimpleLink™ Sub-1GHz hardware design review process:
  • Step 1: Before requesting a review, it is important that to review the technical documentation and design & development resources available on the corresponding product page (see CC1xxx product page links below).
  • Step 2: (...)
View Options
Reference designs

TIDEP0084 — Sub-1 GHz Sensor to Cloud Industrial IoT Gateway Reference Design for Linux Systems

This reference design demonstrates how to connect sensors to the cloud over a long-range Sub-1 GHz wireless network, suitable for industrial settings such as building control and asset tracking.

The design is based on a Linux® gateway.  There is also a TI-RTOS-based sensor-to-cloud option (...)
Design guide: PDF
Schematic: PDF
Reference designs

TIDA-010032 — Universal data concentrator reference design supporting Ethernet, 6LoWPAN RF mesh & more

IPv6-based grid communications are becoming the standard choice in industrial markets and applications like smart meters and grid automation. The universal data concentrator design provides a complete IPv6-based network solution integrated with Ethernet backbone communication, 6LoWPAN RF mesh (...)
Design guide: PDF
Schematic: PDF
Reference designs

TIDA-010024 — Secured 6LoWPAN mesh end-node with enhanced network capacity reference design

This reference design implements an RF mesh network end node with DTLS security for smart meter Advanced Metering Infrastructure (AMI) networks. The network is an IPv6 over low-power wireless personal area networks (6LoWPAN) solution. The design implements this network in a single CC1312R (...)
Design guide: PDF
Schematic: PDF
Reference designs

TIDC-01002 — SimpleLink™ Sub-1 GHz Sensor to Cloud Gateway Reference Design for TI-RTOS Systems

The SimpleLink™ Sub-1 GHz Sensor to Cloud reference design demonstrates how to connect sensors to the cloud over a long-range Sub-1 GHz wireless network, suitable for industrial settings such as building control and asset tracking.

The solution is based on a TI-RTOS gateway.  There is also a (...)
Design guide: PDF
Schematic: PDF
Package Pins CAD symbols, footprints & 3D models
VQFN (RGZ) 48 Ultra Librarian
VQFN (RSK) 64 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos