Startseite Energiemanagement AC/DC- und DC/DC-Wandler (integrierter FET)
Startseite
Energiemanagement
AC/DC- und DC/DC-Wandler (integrierter FET)

LMR36006

AKTIV

4,2-V bis 60-V, 0.6-A, ultra-kompakter Synchron-Abwärtswandler

Jetzt bestellen
Datenblatt

LMR36006

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Rating Catalog Operating temperature range (°C) -40 to 150 TI functional safety category Functional Safety-Capable Topology Buck Type Converter Iout (max) (A) 0.6 Vin (min) (V) 4.2 Vin (max) (V) 60 Switching frequency (min) (kHz) 1000 Switching frequency (max) (kHz) 2100 Features Enable, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Synchronous Rectification, Wettable flanks package Control mode current mode Vout (min) (V) 1 Vout (max) (V) 57 Iq (typ) (A) 0.000023
Rating Catalog Operating temperature range (°C) -40 to 150 TI functional safety category Functional Safety-Capable Topology Buck Type Converter Iout (max) (A) 0.6 Vin (min) (V) 4.2 Vin (max) (V) 60 Switching frequency (min) (kHz) 1000 Switching frequency (max) (kHz) 2100 Features Enable, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Synchronous Rectification, Wettable flanks package Control mode current mode Vout (min) (V) 1 Vout (max) (V) 57 Iq (typ) (A) 0.000023
VQFN-HR (RNX) 12 6 mm² 3 x 2
  • Designed for reliable and rugged applications
    • Input transient protection up to 66 V
    • Junction temperature range –40°C to +150°C
    • Protection features: thermal shutdown, input undervoltage lockout, cycle-by-cycle current limit, hiccup short-circuit protection
    • 0.2-V dropout with 0.6-A load (typical)
  • Suited for scalable industrial power supplies
  • Low power dissipation across load spectrum
    • 87% efficiency at 1 MHz (24VIN, 5VOUT, 0.6A)
    • 92% efficiency at 1 MHz (12VIN, 5VOUT, 0.6A)
    • Increased light load efficiency in PFM
    • Low operating quiescent current of 26 µA
  • Small 2-mm × 3-mm HotRod™ package
  • Solution with few external components
    • LMR36006-Q1 and LMR36015-Q1 available in 400 kHz and 2.1 MHz, adjustable output, and fixed 3.3 VOUT
    • Optimized for ultra low EMI requirements
      • Meets CISPR25 class 5 standard
      • Hotrod™ package minimizes switch node ringing
      • Parallel input path minimizes parasitic inductance
      • Spread spectrum reduces peak emissions
    • Create a custom design using the LMR36006 with the WEBENCH® Power Designer
    • Designed for reliable and rugged applications
      • Input transient protection up to 66 V
      • Junction temperature range –40°C to +150°C
      • Protection features: thermal shutdown, input undervoltage lockout, cycle-by-cycle current limit, hiccup short-circuit protection
      • 0.2-V dropout with 0.6-A load (typical)
    • Suited for scalable industrial power supplies
    • Low power dissipation across load spectrum
      • 87% efficiency at 1 MHz (24VIN, 5VOUT, 0.6A)
      • 92% efficiency at 1 MHz (12VIN, 5VOUT, 0.6A)
      • Increased light load efficiency in PFM
      • Low operating quiescent current of 26 µA
    • Small 2-mm × 3-mm HotRod™ package
    • Solution with few external components
      • LMR36006-Q1 and LMR36015-Q1 available in 400 kHz and 2.1 MHz, adjustable output, and fixed 3.3 VOUT
      • Optimized for ultra low EMI requirements
        • Meets CISPR25 class 5 standard
        • Hotrod™ package minimizes switch node ringing
        • Parallel input path minimizes parasitic inductance
        • Spread spectrum reduces peak emissions
      • Create a custom design using the LMR36006 with the WEBENCH® Power Designer

      The LMR36006 regulator is an easy-to-use, synchronous, step-down DC/DC converter. With integrated high-side and low-side power MOSFETs, up to 0.6 A of output current is delivered over a wide input voltage range of 4.2 V to 60 V. Tolerance goes up to 66 V. The transient tolerance reduces the necessary design effort to protect against overvoltages and meets the surge immunity requirements of IEC 61000-4-5.

      The LMR36006 uses peak-current-mode control to provide optimal efficiency and output voltage accuracy. Precision enable gives flexibility by enabling a direct connection to the wide input voltage or precise control over device start-up and shutdown. The power-good flag, with built-in filtering and delay, offers a true indication of system status eliminating the requirement for an external supervisor.

      The LMR36006 is in a HotRod™ package which enables low noise, higher efficiency, and the smallest package to die ratio. The device requires few external components and has a pinout designed for simple PCB layout. The small solution size and feature set of the LMR36006 are designed to simplify implementation for a wide range of end equipment, including space critical applications of ultra-small field transmitters and vision sensors.

      The LMR36006 regulator is an easy-to-use, synchronous, step-down DC/DC converter. With integrated high-side and low-side power MOSFETs, up to 0.6 A of output current is delivered over a wide input voltage range of 4.2 V to 60 V. Tolerance goes up to 66 V. The transient tolerance reduces the necessary design effort to protect against overvoltages and meets the surge immunity requirements of IEC 61000-4-5.

      The LMR36006 uses peak-current-mode control to provide optimal efficiency and output voltage accuracy. Precision enable gives flexibility by enabling a direct connection to the wide input voltage or precise control over device start-up and shutdown. The power-good flag, with built-in filtering and delay, offers a true indication of system status eliminating the requirement for an external supervisor.

      The LMR36006 is in a HotRod™ package which enables low noise, higher efficiency, and the smallest package to die ratio. The device requires few external components and has a pinout designed for simple PCB layout. The small solution size and feature set of the LMR36006 are designed to simplify implementation for a wide range of end equipment, including space critical applications of ultra-small field transmitters and vision sensors.
      filter Andere AC/DC- und DC/DC-Wandler (integrierter FET) suchen
      Herunterladen Video mit Transkript ansehen Video

      Ähnliche Produkte, die für Sie interessant sein könnten

      open-in-new Alternativen vergleichen
      Gleiche Funktionalität, andere Pinbelegung als verglichener Baustein
      LMR36510 AKTIV Synchroner Abwärtswandler SIMPLE SWITCHER®, 4,2 bis 65 V, 1 A, mit 26 uA Ruhestrom SOIC package

      Technische Dokumentation

      star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
      Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
      Alle anzeigen 15
      Typ Titel Datum
      * Data sheet LMR36006 4.2-V to 60-V, 0.6-A Ultra-Small Synchronous Step-Down Converter datasheet (Rev. C) PDF | HTML 03 Okt 2019
      Application note Working with Inverting Buck-Boost Converters (Rev. B) PDF | HTML 18 Okt 2022
      Application note Step-Dwn (Buck) Convrtr Pwer Solutions for Programmable Logic Controller Systems (Rev. A) PDF | HTML 26 Jul 2021
      Functional safety information LMR36006 and LMR36006-Q1 Functional Safety, FIT Rate, FMD, and Pin FMA PDF | HTML 15 Apr 2021
      Selection guide Buck Converter Quick Reference Guide (Rev. B) 08 Apr 2021
      Application note Understanding Mode Transitions for LMR33620/30 and LMR36006/15 04 Apr 2019
      Technical article How a DC/DC converter package and pinout design can enhance automotive EMI perform PDF | HTML 04 Sep 2018
      Technical article A review of EMI standards, part 2 – radiated emissions PDF | HTML 05 Jul 2018
      Technical article A review of EMI standards, part 1 – conducted emissions PDF | HTML 28 Jun 2018
      Technical article Effects of IC package on EMI performance PDF | HTML 22 Mai 2018
      User guide LMR360xxxEVM User's Guide 14 Mär 2018
      Application note Output Ripple Voltage for Buck Switching Regulator (Rev. A) 13 Okt 2014
      Analog Design Journal Accurately measuring efficiency of ultralow-IQ devices 22 Jan 2014
      Application note AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 23 Apr 2013
      Application note AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A) 23 Apr 2013

      Design und Entwicklung

      Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

      Evaluierungsplatine

      LMR36006BEVM — Synchron-Abwärtswandler-Evaluierungsmodul

      The LMR36006 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LMR36006 synchronous step-down converter.  The LMR36006 provides exceptional efficiency and accuracy in a very small solution size.
      Benutzerhandbuch: PDF
      Nicht verfügbar auf TI.com
      Evaluierungsplatine

      LMR36015AEVM — Synchron-Abwärtswandler-Evaluierungsmodul

      The LMR36015 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LMR36015 synchronous step-down converter.  The LMR36015 provides exceptional efficiency and accuracy in a very small solution size.
      Benutzerhandbuch: PDF
      Nicht verfügbar auf TI.com
      Simulationsmodell

      LMR36006B Non-Inverting and Inverting PSpice Transient Model (Rev. A)

      SNVMBI7A.ZIP (150 KB) - PSpice Model
      Herunterladen
      Simulationsmodell

      LMR36006B Non-Inverting and Inverting Unencrypted PSpice Transient Model (Rev. A)

      SNVMBI6A.ZIP (8 KB) - PSpice Model
      Herunterladen
      Simulationsmodell

      LMR36006C Non-Inverting and Inverting Pspice Transient Model

      SNVMBQ1.ZIP (165 KB) - PSpice Model
      Herunterladen
      Simulationsmodell

      LMR36006C Non-Inverting and Inverting Unencrypted Pspice Transient Model

      SNVMBQ2.ZIP (8 KB) - PSpice Model
      Herunterladen
      Berechnungstool

      SNVC234 — Mode Transitions Calculator LMR336x0 LMR360xx

      Unterstützte Produkte und Hardware

      Unterstützte Produkte und Hardware

      Produkte
      AC/DC- und DC/DC-Wandler (integrierter FET)
      LMR33620 — Synchroner SIMPLE SWITCHER®-Abwärtswandler (3,8 bis 36 V, 2A) mit extrem geringer Störaussendung (EM LMR33620-Q1 — Synchroner Abwärtsspannungswandler, 3,8 bis 36 V, 2 A LMR33630 — Synchroner SIMPLE SWITCHER®-Abwärtswandler (3,8 bis 36 V, 3 A) mit extrem geringer Störaussendung (E LMR33630-Q1 — Synchroner Abwärtsspannungswandler, 3,8 bis 36 V, 3 A LMR36006 — 4,2-V bis 60-V, 0.6-A, ultra-kompakter Synchron-Abwärtswandler LMR36006-Q1 — 4,2-V bis 60-V, 0.6-A, ultra-kompakter Synchron-Abwärtswandler LMR36015 — 4,2-V bis 60-V, 1,5-A, ultra-kompakter Synchron-Abwärtswandler LMR36015-Q1 — 4,2-V bis 60-V, 1,5-A, ultra-kompakter Synchron-Abwärtswandler
      Herunterladen
      Referenzdesigns

      PMP23300 — 60-W-USB-Typ-C-Stromversorgungs-Abwärtswandler® mit breitem Eingang – Referenzdesign

      Bei diesem Referenzdesign handelt es sich um ein 60-W-USB-Typ-C®-Stromversorgungs-Design (Power Delivery, PD), das im Standardleistungsbereich (SPR) arbeitet und den TPS65987D USB-Typ-C- und USB-PD-Controller, den Synchron-Abwärtswandler LM76005, den Synchron-Abwärtswandler LMR36506 und die (...)
      Test report: PDF
      Referenzdesigns

      PMP15040 — Referenzdesign für Stromversorgungen mit großem VIN für platzkritische Industriesensoren

      This reference design provides an example of how to power FPGAs, ASICs, or MCUs in industrial sensor applications when space-constraints are a primary concern. The wide 6-V to 60-V input voltage range and the use of ultra-small and highly efficient DC/DC converters makes the design well suited for (...)
      Test report: PDF
      Schaltplan: PDF
      Referenzdesigns

      TIDA-010055 — Nicht isolierte Stromversorgungsarchitektur mit Diagnose-Referenzdesign für Schutzrelaismodule

      This reference design showcases non-isolated power supply architectures for protection relays with analog input/output and communication modules generated from 5-, 12-, or 24-V DC input. To generate the power supplies the design uses DC/DC converters with an integrated FET, a power module with an (...)
      Design guide: PDF
      Schaltplan: PDF
      Referenzdesigns

      TIDA-010049 — Referenzdesign für Digital-Eingang mit TÜV-Bewertung für IEC 61508 (SIL-2)

      This 8-channel, group-isolated, digital input module reference design, focuses on applications with the need for industrial functional safety. This design has diagnostics implemented to help detect both permanent and transient random hardware faults. The concept of this input module has been (...)
      Design guide: PDF
      Schaltplan: PDF
      Referenzdesigns

      PMP15039 — Referenzdesign für zweistufige Stromversorgung für Feldtransmitter

      This dual output reference design provides an example of how to power FPGAs, ASICs, or MCUs when space-constraints are a primary concern. The wide 6-V to 60-V input voltage range and the use of ultra-small and highly efficient DC/DC converters makes the design well suited for applications like (...)
      Test report: PDF
      Schaltplan: PDF
      Gehäuse Pins Herunterladen
      VQFN-HR (RNX) 12 Optionen anzeigen
      Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

      Bestellen & Qualität

      Beinhaltete Information:
      • RoHS
      • REACH
      • Bausteinkennzeichnung
      • Blei-Finish/Ball-Material
      • MSL-Rating / Spitzenrückfluss
      • MTBF-/FIT-Schätzungen
      • Materialinhalt
      • Qualifikationszusammenfassung
      • Kontinuierliches Zuverlässigkeitsmonitoring
      Beinhaltete Information:
      • Werksstandort
      • Montagestandort

      Support und Schulungen

      TI E2E™-Foren mit technischem Support von TI-Ingenieuren

      Alle Forenthemen auf Englisch anzeigen

      Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

      Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

      Videos