THS6184

AKTIV

xDSL-Leitungstreiber, zwei Ports

Jetzt bestellen

Datenblatt

document-pdfAcrobat Dual Port Low Power Differential xDSL Line Driver Amplifiers datasheet (Rev. D) (Englisch)

THS6184

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Number of channels

4

Architecture

DSL Line Driver

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

8

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

32

BW at Acl (MHz)

50

Acl, min spec gain (V/V)

1

Vn at flatband (typ) (nV√Hz)

3

Vn at 1 kHz (typ) (nV√Hz)

3.1

Iq per channel (typ) (mA)

4.3

Vos (offset voltage at 25°C) (max) (mV)

22

Rail-to-rail

No

Features

Adjustable BW/IQ/IOUT, Shutdown

Rating

Catalog

Operating temperature range (°C)

-40 to 85

CMRR (typ) (dB)

67

Input bias current (max) (pA)

10000000

Offset drift (typ) (µV/°C)

7

GBW (typ) (MHz)

50

Iout (typ) (mA)

415

2nd harmonic (dBc)

89

3rd harmonic (dBc)

85

Frequency of harmonic distortion measurement (MHz)

1

Number of channels

4

Architecture

DSL Line Driver

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

8

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

32

BW at Acl (MHz)

50

Acl, min spec gain (V/V)

1

Vn at flatband (typ) (nV√Hz)

3

Vn at 1 kHz (typ) (nV√Hz)

3.1

Iq per channel (typ) (mA)

4.3

Vos (offset voltage at 25°C) (max) (mV)

22

Rail-to-rail

No

Features

Adjustable BW/IQ/IOUT, Shutdown

Rating

Catalog

Operating temperature range (°C)

-40 to 85

CMRR (typ) (dB)

67

Input bias current (max) (pA)

10000000

Offset drift (typ) (µV/°C)

7

GBW (typ) (MHz)

50

Iout (typ) (mA)

415

2nd harmonic (dBc)

89

3rd harmonic (dBc)

85

Frequency of harmonic distortion measurement (MHz)

1

HTSSOP (PWP)

20

41.6 mm² 6.5 x 6.4

VQFN (RHF)

24

20 mm² 5 x 4

Trimmed Low-Power Consumption
- 4.2-mA/amp Full Bias Mode; 4.8 mA Max
- 3.2-mA/amp Mid Bias Mode; 3.7 mA Max
- 2.15-mA/amp Low Bias Mode; 2.5 mA Max
- Shutdown Mode and I_ADJ Pin for Variable Bias
Low Noise
- 3-nV/√Hz Voltage Noise
- 5.9-pA/√Hz Inverting Current Noise
- 1.2-pA/√Hz Noninverting Current Noise
Low MTPR Distortion
- -74 dB with ADSL and ADSL2
- -71 dB with ADSL2+ and -70 dB with ADSL2++
-83 dBc THD (1 MHz, 100-Ω Differential)
High Output Current: >415 mA (25-Ω Load)
Wide Output Swing: 44 V_PP (±12-V, 200-Ω Differential)
Wide Bandwidth: 30 MHz (Gain = 5)
Wide Power Supply Range: ±4 V to ±16 V
APPLICATIONS
- Ideal For Power Sensitive, High Density ADSL, ADSL2, ADSL2+, and ADSL2++ Systems

PowerPAD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners

Trimmed Low-Power Consumption
- 4.2-mA/amp Full Bias Mode; 4.8 mA Max
- 3.2-mA/amp Mid Bias Mode; 3.7 mA Max
- 2.15-mA/amp Low Bias Mode; 2.5 mA Max
- Shutdown Mode and I_ADJ Pin for Variable Bias
Low Noise
- 3-nV/√Hz Voltage Noise
- 5.9-pA/√Hz Inverting Current Noise
- 1.2-pA/√Hz Noninverting Current Noise
Low MTPR Distortion
- -74 dB with ADSL and ADSL2
- -71 dB with ADSL2+ and -70 dB with ADSL2++
-83 dBc THD (1 MHz, 100-Ω Differential)
High Output Current: >415 mA (25-Ω Load)
Wide Output Swing: 44 V_PP (±12-V, 200-Ω Differential)
Wide Bandwidth: 30 MHz (Gain = 5)
Wide Power Supply Range: ±4 V to ±16 V
APPLICATIONS
- Ideal For Power Sensitive, High Density ADSL, ADSL2, ADSL2+, and ADSL2++ Systems

PowerPAD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners

The THS6184 is a dual-port, low-power current feedback differential line driver amplifier system ideal for xDSL systems. Its extremely low-power dissipation is ideal for ADSL, ADSL2, ADSL2+, and ADSL2++ systems that must achieve high densities in ADSL central office applications by combining two ports, or four amplifiers, into one package.

The unique architecture of the THS6184 allows the trimmed quiescent current to be much lower than existing line drivers while still achieving high linearity. Distortion at these low-power levels is good with -83-dBc THD at 1 MHz with the low bias mode of 4.2 mA/port. Fixed and variable multiple-bias settings of the amplifiers allows for enhanced power savings for line lengths where the full performance of the amplifier is not required.

The wide output swing of 44-V_PP differentially with ±12-V power supplies coupled with over 415-mA current drive allow for wide dynamic range, keeping distortion minimized. With a low 3-nV/√ Hz voltage noise coupled with a low 5.9-pA/√Hz inverting current noise, the THS6184 increases the sensitivity of the receive signals allowing for better margins and reach.

The THS6184 is a dual-port, low-power current feedback differential line driver amplifier system ideal for xDSL systems. Its extremely low-power dissipation is ideal for ADSL, ADSL2, ADSL2+, and ADSL2++ systems that must achieve high densities in ADSL central office applications by combining two ports, or four amplifiers, into one package.

The unique architecture of the THS6184 allows the trimmed quiescent current to be much lower than existing line drivers while still achieving high linearity. Distortion at these low-power levels is good with -83-dBc THD at 1 MHz with the low bias mode of 4.2 mA/port. Fixed and variable multiple-bias settings of the amplifiers allows for enhanced power savings for line lengths where the full performance of the amplifier is not required.

The wide output swing of 44-V_PP differentially with ±12-V power supplies coupled with over 415-mA current drive allow for wide dynamic range, keeping distortion minimized. With a low 3-nV/√ Hz voltage noise coupled with a low 5.9-pA/√Hz inverting current noise, the THS6184 increases the sensitivity of the receive signals allowing for better margins and reach.

open-in-new

Andere Leitungstreiber suchen

Herunterladen Video mit Transkript ansehen Video

Alle anzeigen 3

	Typ	Titel	Datum
*	Data sheet	Dual Port Low Power Differential xDSL Line Driver Amplifiers datasheet (Rev. D)	08 Jan 2009
	E-book	The Signal e-book: A compendium of blog posts on op amp design topics	28 Mär 2017
	Application note	Noise Analysis for High Speed Op Amps (Rev. A)	17 Jan 2005

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell

THS6184 PSpice Model (Rev. A)

SLLC281A.ZIP (40 KB) - PSpice Model

Herunterladen

Simulationsmodell

THS6184 TINA-TI Reference Design

SLLM066.TSC (19 KB) - TINA-TI Reference Design

Herunterladen

Simulationsmodell

THS6184 TINA-TI Spice Model

SLLM065.ZIP (4 KB) - TINA-TI Spice Model

Herunterladen

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

Benutzerhandbuch: PDF

Optionen anzeigen

Gehäuse	Pins	Herunterladen
HTSSOP (PWP)	20	Optionen anzeigen
VQFN (RHF)	24	Optionen anzeigen

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

THS6184

xDSL-Leitungstreiber, zwei Ports

THS6184

Produktdetails

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie verglichener Baustein

Technische Dokumentation

Design und Entwicklung

THS6184 PSpice Model (Rev. A)

THS6184 TINA-TI Reference Design

THS6184 TINA-TI Spice Model

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos