Startseite Energiemanagement AC/DC- und DC/DC-Wandler (integrierter FET)
Startseite
Energiemanagement
AC/DC- und DC/DC-Wandler (integrierter FET)
NEU

TPS543021

AKTIV

Synchroner Abwärtswandler, 4,5 V bis 30 V Eingang, 3 A, 400 kHz

Jetzt bestellen
Datenblatt

TPS543021

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 30 Vin (min) (V) 4.5 Vout (max) (V) 30 Vout (min) (V) 0.6 Features Enable, Light load efficiency, Pre-Bias Start-Up, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, UVLO adjustable EMI features Spread Spectrum Control mode current mode Switching frequency (min) (kHz) 400 Switching frequency (max) (kHz) 400 Operating temperature range (°C) -40 to 150 Iq (typ) (µA) 45 Duty cycle (max) (%) 100 Type Converter
Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 30 Vin (min) (V) 4.5 Vout (max) (V) 30 Vout (min) (V) 0.6 Features Enable, Light load efficiency, Pre-Bias Start-Up, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, UVLO adjustable EMI features Spread Spectrum Control mode current mode Switching frequency (min) (kHz) 400 Switching frequency (max) (kHz) 400 Operating temperature range (°C) -40 to 150 Iq (typ) (µA) 45 Duty cycle (max) (%) 100 Type Converter
SOT-5X3 (DRL) 6 2.56 mm² 1.6 x 1.6
  • Configured for a wide range of applications
    • 4.5V to 28V input voltage range
    • Up to 3A continuous output current
    • –40°C to 150°C junction temperature range
    • 70ns minimum switching on time
    • ±1% tolerance reference voltage (25°C)
    • Supports low drop out mode
    • Precision enable
  • High efficiency
    • Integrated 75mΩ and 35mΩ MOSFETs
    • Low 2µA shutdown, 28µA quiescent current
    • Pulse frequency modulation (PFM) for high light load efficiency
  • Ease of use
    • Peak current mode control with internal compensation
    • Fixed 400kHz switching frequency
    • Internal 5ms soft start
    • Frequency spread spectrum to reduce EMI
    • Overcurrent protection with hiccup mode
    • Non-latched protection for overtemperature protection (OTP), overcurrent protection (OCP), overvoltage protection (OVP), and undervoltage lockout (UVLO)
    • SOT-563 package
  • Create a custom design using the TPS543021 with the WEBENCH Power Designer
  • Configured for a wide range of applications
    • 4.5V to 28V input voltage range
    • Up to 3A continuous output current
    • –40°C to 150°C junction temperature range
    • 70ns minimum switching on time
    • ±1% tolerance reference voltage (25°C)
    • Supports low drop out mode
    • Precision enable
  • High efficiency
    • Integrated 75mΩ and 35mΩ MOSFETs
    • Low 2µA shutdown, 28µA quiescent current
    • Pulse frequency modulation (PFM) for high light load efficiency
  • Ease of use
    • Peak current mode control with internal compensation
    • Fixed 400kHz switching frequency
    • Internal 5ms soft start
    • Frequency spread spectrum to reduce EMI
    • Overcurrent protection with hiccup mode
    • Non-latched protection for overtemperature protection (OTP), overcurrent protection (OCP), overvoltage protection (OVP), and undervoltage lockout (UVLO)
    • SOT-563 package
  • Create a custom design using the TPS543021 with the WEBENCH Power Designer

The TPS543021 is a 4.5V to 28V input voltage range, 3A synchronous buck converter. The device includes two integrated switching FETs, internal loop compensation and 5ms internal soft start to reduce component count.

By integrating the MOSFETs, the TPS543021 achieves the high power density and offers a small footprint on the PCB. TPS543021 has adjustable output by a different FB resistor configuration.

The TPS543021 operates in PFM (pulse frequency modulation) mode for high light load efficiency and reduces the power loss. The device incorporates spread spectrum for Electromagnetic Interference (EMI) reduction.

Cycle-by-cycle current limit in high-side MOSFET protects the converter in an overload condition and is enhanced by a low-side MOSFET freewheeling current limit which prevents current runaway. Hiccup mode protection is triggered if the overcurrent condition has persisted for longer than the preset time.

The TPS543021 is a 4.5V to 28V input voltage range, 3A synchronous buck converter. The device includes two integrated switching FETs, internal loop compensation and 5ms internal soft start to reduce component count.

By integrating the MOSFETs, the TPS543021 achieves the high power density and offers a small footprint on the PCB. TPS543021 has adjustable output by a different FB resistor configuration.

The TPS543021 operates in PFM (pulse frequency modulation) mode for high light load efficiency and reduces the power loss. The device incorporates spread spectrum for Electromagnetic Interference (EMI) reduction.

Cycle-by-cycle current limit in high-side MOSFET protects the converter in an overload condition and is enhanced by a low-side MOSFET freewheeling current limit which prevents current runaway. Hiccup mode protection is triggered if the overcurrent condition has persisted for longer than the preset time.
filter Andere AC/DC- und DC/DC-Wandler (integrierter FET) suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 2
Typ Titel Datum
* Data sheet TPS543021 4.5V to 28V, 3A, EMI Friendly, Synchronous Step-Down Converter datasheet (Rev. A) PDF | HTML 16 Sep 2025
Certificate TPS543021EVM EU Declaration of Conformity (DoC) 17 Jul 2025

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
SOT-5X3 (DRL) 6 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos