TPS63061

Name: TPS63061
Brand: TI
SKU: TPS63061
Price: 1.133 USD

AKTIV

Abwärts/Aufwärtswandler für Eingangsspannungen von 2,5 V bis 12 V, 93 % Wirkungsgrad, Schaltstrombeg

Jetzt bestellen

Datenblatt

document-pdfAcrobat TPS6306x High Input Voltage, Buck-Boost Converter With 2-A Switch Current datasheet (Rev. C) (Englisch) PDF | HTML

TPS63061

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Rating

Catalog

Topology

Buck-Boost

Vin (max) (V)

12

Vin (min) (V)

2.5

Vout (max) (V)

8

Vout (min) (V)

2.5

Switch current limit (typ) (A)

2.25

Features

Enable, Frequency synchronization, Light-load efficiency, Load Disconnect, Power good, Synchronous rectification, UVLO fixed

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.00003

Duty cycle (max) (%)

100

Rating

Catalog

Topology

Buck-Boost

Vin (max) (V)

12

Vin (min) (V)

2.5

Vout (max) (V)

8

Vout (min) (V)

2.5

Switch current limit (typ) (A)

2.25

Features

Enable, Frequency synchronization, Light-load efficiency, Load Disconnect, Power good, Synchronous rectification, UVLO fixed

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.00003

Duty cycle (max) (%)

100

WSON (DSC)

10

9 mm² 3 x 3

Input voltage range: 2.5 V to 12 V
Efficiency: Up to 93%
Output current at 5 V (V_IN < 10 V): 2 A in buck mode
Output current at 5 V (V_IN > 4 V): 1.3 A in boost mode
Automatic transition between step down and boost mode
Typical device quiescent current: < 30 µA
Fixed and adjustable output voltage options from 2.5 V to 8 V
Power save mode for improved efficiency at low output power
Forced fixed-frequency operation at 2.4 MHz and synchronization possible
Power good output
Buck-Boost Overlap Control™
Load disconnect during shutdown
Overtemperature protection
Overvoltage protection

Input voltage range: 2.5 V to 12 V
Efficiency: Up to 93%
Output current at 5 V (V_IN < 10 V): 2 A in buck mode
Output current at 5 V (V_IN > 4 V): 1.3 A in boost mode
Automatic transition between step down and boost mode
Typical device quiescent current: < 30 µA
Fixed and adjustable output voltage options from 2.5 V to 8 V
Power save mode for improved efficiency at low output power
Forced fixed-frequency operation at 2.4 MHz and synchronization possible
Power good output
Buck-Boost Overlap Control™
Load disconnect during shutdown
Overtemperature protection
Overvoltage protection

The TPS6306x devices provide a power supply solution for products powered by either three-cell up to six-cell alkaline, NiCd or NiMH battery, or a one-cell or dual-cell Li-Ion or Li-polymer battery. Output currents can go as high as 2 A while using a dual-cell Li-Ion or Li-polymer battery, and discharge to 5 V or lower. The buck-boost converter is based on a fixed frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters power save mode to maintain high efficiency over a wide load current range. The power save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 2.25 A. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load disconnects from the battery.

The devices are available in a 3 mm × 3 mm, 10-pin, WSON (DSC) package.

The TPS6306x devices provide a power supply solution for products powered by either three-cell up to six-cell alkaline, NiCd or NiMH battery, or a one-cell or dual-cell Li-Ion or Li-polymer battery. Output currents can go as high as 2 A while using a dual-cell Li-Ion or Li-polymer battery, and discharge to 5 V or lower. The buck-boost converter is based on a fixed frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters power save mode to maintain high efficiency over a wide load current range. The power save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 2.25 A. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load disconnects from the battery.

The devices are available in a 3 mm × 3 mm, 10-pin, WSON (DSC) package.

filter

Andere DC/DC converters suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 10

Top-Dokumentation	Typ	Titel	Format-Optionen	Datum
*	Data sheet	TPS6306x High Input Voltage, Buck-Boost Converter With 2-A Switch Current datasheet (Rev. C)	PDF \| HTML	15 Sep 2020
	Application note	QFN and SON PCB Attachment (Rev. C)	PDF \| HTML	06 Dez 2023
	Application note	Layer Design for Reducing Radiated EMI of DC to DC Buck-Boost Converters (Rev. A)	PDF \| HTML	09 Jun 2021
	Application note	Performing Accurate PFM Mode Efficiency Measurements (Rev. A)		11 Dez 2018
	Application note	Understanding Undervoltage Lockout in Power Devices (Rev. A)		19 Sep 2018
	Application note	Basic Calculations of a 4 Switch Buck-Boost Power Stage (Rev. B)		09 Jul 2018
	Selection guide	Power Management Guide 2018 (Rev. R)		25 Jun 2018
	Application note	Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs		19 Sep 2011
	Analog Design Journal	IQ: What it is, what it isn’t, and how to use it		17 Jun 2011
	Application note	Minimizing Ringing at the Switch Node of a Boost Converter		15 Sep 2006

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.