Inicio Amplificadores Amplificadores de función especial Drivers de línea

THS6232

ACTIVO

Controlador de línea de HPLC y PLC de banda ancha diferencial con búfer de modo común

Detalles del producto

Number of channels 1 Architecture PLC Line Driver Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 7 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 40 BW at Acl (MHz) 75 Acl, min spec gain (V/V) 5 Vn at flatband (typ) (nV√Hz) 5 Vn at 1 kHz (typ) (nV√Hz) 15.75 Iq per channel (typ) (mA) 25 Vos (offset voltage at 25°C) (max) (mV) 7 Rail-to-rail No Features Adj Bias, Shutdown Rating Catalog Operating temperature range (°C) -40 to 125 CMRR (typ) (dB) 80 Input bias current (max) (pA) 3000000 Offset drift (typ) (µV/°C) 18 GBW (typ) (MHz) 50 Iout (typ) (mA) 310 2nd harmonic (dBc) 88 3rd harmonic (dBc) 99 Frequency of harmonic distortion measurement (MHz) 1
Number of channels 1 Architecture PLC Line Driver Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 7 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 40 BW at Acl (MHz) 75 Acl, min spec gain (V/V) 5 Vn at flatband (typ) (nV√Hz) 5 Vn at 1 kHz (typ) (nV√Hz) 15.75 Iq per channel (typ) (mA) 25 Vos (offset voltage at 25°C) (max) (mV) 7 Rail-to-rail No Features Adj Bias, Shutdown Rating Catalog Operating temperature range (°C) -40 to 125 CMRR (typ) (dB) 80 Input bias current (max) (pA) 3000000 Offset drift (typ) (µV/°C) 18 GBW (typ) (MHz) 50 Iout (typ) (mA) 310 2nd harmonic (dBc) 88 3rd harmonic (dBc) 99 Frequency of harmonic distortion measurement (MHz) 1
VQFN (RHF) 24 20 mm² (5 mm × 4 mm)
  • Supply range (VS): 7V to 40V
  • Small-signal bandwidth: 75MHz (VO = 2VPP, G = 5)
  • Adjustable power modes:
    • Full-bias mode: 25mA
    • Mid-bias mode: 19.5mA
    • Low-bias mode: 15mA
    • Ultra-low-bias mode: 10mA
    • Low-power-shutdown mode
    • IADJ pin for variable bias
  • SGCC HPLC out-of-band suppression: >30dBc
    • Band0: 49dBc
    • Band1: 61dBc
    • Band2: 64dBc
    • Band3: 65dBc
  • High output current: 800mA (VS = 40V, 1Ω load)
  • Low distortion (VS = 12V, 50Ω load):
    • HD2 (at 1MHz): –88dBc
    • HD3 (at 1MHz): –99dBc
  • Wide output swing (VS = 12V):
    • 21VPP (100Ω load), 19VPP (50Ω load)
  • Integrated midsupply common-mode buffer
  • Integrated overtemperature protection
  • Pin-compatible with THS6212 and THS6222 in 24‑pin VQFN
  • Supply range (VS): 7V to 40V
  • Small-signal bandwidth: 75MHz (VO = 2VPP, G = 5)
  • Adjustable power modes:
    • Full-bias mode: 25mA
    • Mid-bias mode: 19.5mA
    • Low-bias mode: 15mA
    • Ultra-low-bias mode: 10mA
    • Low-power-shutdown mode
    • IADJ pin for variable bias
  • SGCC HPLC out-of-band suppression: >30dBc
    • Band0: 49dBc
    • Band1: 61dBc
    • Band2: 64dBc
    • Band3: 65dBc
  • High output current: 800mA (VS = 40V, 1Ω load)
  • Low distortion (VS = 12V, 50Ω load):
    • HD2 (at 1MHz): –88dBc
    • HD3 (at 1MHz): –99dBc
  • Wide output swing (VS = 12V):
    • 21VPP (100Ω load), 19VPP (50Ω load)
  • Integrated midsupply common-mode buffer
  • Integrated overtemperature protection
  • Pin-compatible with THS6212 and THS6222 in 24‑pin VQFN

The THS6232 is a differential line-driver amplifier with current-feedback architecture, and provides high output current with low distortion performance. The device is targeted for use in broadband, high-speed, power-line communications (HPLC) line-driver applications that require high linearity when driving heavy line loads.

The unique architecture of the THS6232 uses minimal quiescent current while achieving very high linearity. The amplifier has an adjustable current pin (IADJ) that sets the nominal current consumption, along with the multiple bias modes that allow for enhanced power savings where the full performance of the amplifier is not required. Shutdown bias mode provides further power savings during receive mode in time division multiplexed (TDM) systems while maintaining high output impedance. The integrated midsupply common-mode buffer eliminates external components, reducing system cost and board space.

The wide output swing of 21VPP (100Ω load) with 12V power supplies, coupled with over 550mA of current drive, allows for wide dynamic range with minimal distortion.

The THS6232 is available in 24-pin VQFN package with exposed thermal pad, and is specified for operation from –40°C to +125°C.

The THS6232 is a differential line-driver amplifier with current-feedback architecture, and provides high output current with low distortion performance. The device is targeted for use in broadband, high-speed, power-line communications (HPLC) line-driver applications that require high linearity when driving heavy line loads.

The unique architecture of the THS6232 uses minimal quiescent current while achieving very high linearity. The amplifier has an adjustable current pin (IADJ) that sets the nominal current consumption, along with the multiple bias modes that allow for enhanced power savings where the full performance of the amplifier is not required. Shutdown bias mode provides further power savings during receive mode in time division multiplexed (TDM) systems while maintaining high output impedance. The integrated midsupply common-mode buffer eliminates external components, reducing system cost and board space.

The wide output swing of 21VPP (100Ω load) with 12V power supplies, coupled with over 550mA of current drive, allows for wide dynamic range with minimal distortion.

The THS6232 is available in 24-pin VQFN package with exposed thermal pad, and is specified for operation from –40°C to +125°C.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Reemplazo con funcionalidad mejorada del dispositivo comparado
THS6222 ACTIVO Controlador de línea de HPLC y PLC de banda ancha diferencial con búfer de modo común Higher bandwidth (128MHz), higher output current (400mA)

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos THS6232 7V-to-40V, Differential HPLC Line Driver With Common-Mode Buffer datasheet PDF | HTML 18/06/2024
Guía de diseño Solar Power Line Communication Reference Design (Rev. C) PDF | HTML 13/01/2025
Application brief Power Line Communication in Solar Applications PDF | HTML 12/12/2024
Application brief LiFi: TI High-Speed Products for Optical Wireless Communication PDF | HTML 7/08/2023

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

THS6232RHFEVM — Módulo de evaluación THS6232

El módulo de evaluación (EVM) THS6232 está diseñado para mostrar rápida y fácilmente la funcionalidad y versatilidad del amplificador. El módulo de evaluación (EVM) está listo para conectarse a la alimentación, la fuente de señal y los instrumentos de prueba mediante el uso de conectores (...)

Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Modelo de simulación

THS6232 TINA-TI Model

SBOMCI4.ZIP (25 KB) - Diseño de referencia TINA-TI
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RHF) 24 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos