Inicio Administración de potencia Circuitos integrados de alimentación a través de Ethernet (PoE) Equipos de alimentación

TPS23880

ACTIVO

PSE PoEde 4 pares, tipo 4 y 8 canales con SRAM programable

Detalles del producto

PoE standards supported 802.3at Type 1 (802.3af), 802.3at Type 2, 802.3bt Type 3, 802.3bt Type 4 MPS method DC Disconnect Features Auto Mode, Current Limit with Foldback, Fast shutdown, Multi Level Port Priority, Over Current Reporting, Over Temp Reporting, Port remapping, Programmable PCUT, Programmable Port Power Limiting, SRAM Programmable Number of PSE ports 8 Pair control 2-Pair Alt A, 4-Pair Vin (max) (V) 57 Vin (min) (V) 44 FET External ILIM Programmable Operating temperature range (°C) -40 to 125 Rating Catalog
PoE standards supported 802.3at Type 1 (802.3af), 802.3at Type 2, 802.3bt Type 3, 802.3bt Type 4 MPS method DC Disconnect Features Auto Mode, Current Limit with Foldback, Fast shutdown, Multi Level Port Priority, Over Current Reporting, Over Temp Reporting, Port remapping, Programmable PCUT, Programmable Port Power Limiting, SRAM Programmable Number of PSE ports 8 Pair control 2-Pair Alt A, 4-Pair Vin (max) (V) 57 Vin (min) (V) 44 FET External ILIM Programmable Operating temperature range (°C) -40 to 125 Rating Catalog
VQFN (RTQ) 56 64 mm² (8 mm × 8 mm)
  • IEEE 802.3bt PSE solution for PoE 2 Type 3 or Type 4 Power Over Ethernet applications
  • Eight independent PSE channels
  • SRAM Programmable memory
  • Programmable power limiting accuracy ±3%
  • Selectable 2-pair or 4-pair port power allocations
    • 15.4 W, 30 W, 45 W, 60 W, 75 W or 90 W
  • Single and dual signature PD compatibility
  • Dedicated 14-bit integrating current ADC per port
    • Inherent filtering
    • Noise immune MPS for DC disconnect
    • 2% Current sensing accuracy
    • 100-ms Rolling port current averaging
  • 1- or 3-Bit fast port shutdown input
  • Auto-class discovery and power measurement
  • Never Fooled 4-Point detection
  • Inrush and operational foldback protection
  • 425-mA and 1.25-A Selectable current limits
  • Port re-mapping
  • 8-Bit or 16-bit I2C communication
  • Flexible processor controlled operating modes
    • Auto, semi auto and manual / diagnostic
  • Per Port voltage monitoring and telemetry
  • –40°C to +125°C Temperature operation
  • IEEE 802.3bt PSE solution for PoE 2 Type 3 or Type 4 Power Over Ethernet applications
  • Eight independent PSE channels
  • SRAM Programmable memory
  • Programmable power limiting accuracy ±3%
  • Selectable 2-pair or 4-pair port power allocations
    • 15.4 W, 30 W, 45 W, 60 W, 75 W or 90 W
  • Single and dual signature PD compatibility
  • Dedicated 14-bit integrating current ADC per port
    • Inherent filtering
    • Noise immune MPS for DC disconnect
    • 2% Current sensing accuracy
    • 100-ms Rolling port current averaging
  • 1- or 3-Bit fast port shutdown input
  • Auto-class discovery and power measurement
  • Never Fooled 4-Point detection
  • Inrush and operational foldback protection
  • 425-mA and 1.25-A Selectable current limits
  • Port re-mapping
  • 8-Bit or 16-bit I2C communication
  • Flexible processor controlled operating modes
    • Auto, semi auto and manual / diagnostic
  • Per Port voltage monitoring and telemetry
  • –40°C to +125°C Temperature operation

The TPS23880 is an 8-channel power sourcing equipment (PSE) controller engineered to insert power onto Ethernet cables in accordance with the IEEE 802.3bt standard. The eight individual power channels can be configured in any combination of 2-Pair (1-channel) or 4-Pair (2-channels) PoE Ports. The PSE controller can detect powered devices (PDs) that have a valid signature, complete mutual identification, and apply power.

Programmable SRAM enables in-field firmware upgradability over I2C to ensure IEEE compliance and interoperability with the latest PoE enabled devices. Dedicated per port ADCs provide continuous port current monitoring and the ability to perform parallel classification measurements for faster port turn on times. A ±3% accurate programmable port power limit provides the ability to expand the maximum power sourced above 90 W without exceeding 100 W while also making system level power management control more easy to implement and reliable. The Fast Shutdown (OSS) input provides up to eight levels of per port shutdown priority for applications requiring immediate disabling of multiple ports. The 255-mΩ current sense resistor and external FET architecture allow designs to balance size, efficiency, thermal and solution cost requirements. 

Port remapping and pin-to-pin compatibility with the TPS2388, TPS23881, and TPS23882 devices eases migration from previous generation PSE designs and enables interchangeable 2-layer PCB designs to accommodate different system PoE power configurations.

The TPS23880 is an 8-channel power sourcing equipment (PSE) controller engineered to insert power onto Ethernet cables in accordance with the IEEE 802.3bt standard. The eight individual power channels can be configured in any combination of 2-Pair (1-channel) or 4-Pair (2-channels) PoE Ports. The PSE controller can detect powered devices (PDs) that have a valid signature, complete mutual identification, and apply power.

Programmable SRAM enables in-field firmware upgradability over I2C to ensure IEEE compliance and interoperability with the latest PoE enabled devices. Dedicated per port ADCs provide continuous port current monitoring and the ability to perform parallel classification measurements for faster port turn on times. A ±3% accurate programmable port power limit provides the ability to expand the maximum power sourced above 90 W without exceeding 100 W while also making system level power management control more easy to implement and reliable. The Fast Shutdown (OSS) input provides up to eight levels of per port shutdown priority for applications requiring immediate disabling of multiple ports. The 255-mΩ current sense resistor and external FET architecture allow designs to balance size, efficiency, thermal and solution cost requirements. 

Port remapping and pin-to-pin compatibility with the TPS2388, TPS23881, and TPS23882 devices eases migration from previous generation PSE designs and enables interchangeable 2-layer PCB designs to accommodate different system PoE power configurations.

Descargar Ver vídeo con transcripción Video
Solicitar más información

Se encuentran disponibles el asesoramiento sobre el producto TPS23880 y la descarga del firmware más reciente. Solicitar ahora

Para Rsense reducido (200 mΩ) y funcionamiento en modo autónomo, consulte el  TPS23881

Para funcionamiento con 2 pares, tipo 3 de 30 W, consulte el TPS23882

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 8
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos TPS23880 Type-4 4-Pair 8-Channel PoE 2 PSE Controller with Programmable SRAM datasheet (Rev. G) PDF | HTML 14/08/2020
Guía de diseño 24-Port (4 Pair) Power Sourcing Equipment Reference Design for Multiport Applications (Rev. C) PDF | HTML 31/03/2026
Application brief How to Load TPS2388x SRAM and Parity Code Over I2C (Rev. E) PDF | HTML 20/04/2023
Informe de prueba TPS23880 PoE2 Test Report 26/05/2020
Artículo técnico Key considerations for designing with the new PoE standard PDF | HTML 16/07/2018
Artículo técnico The new PoE standard: It’s almost here PDF | HTML 6/06/2018
Nota sobre la aplicación Beyond BT High-Power PoE Solution using the TPS23880 and TPS2372-4 17/04/2018
Nota sobre la aplicación TPS23861 Power-On Considerations 21/07/2015

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Kit de desarrollo

BOOST-PSEMTHR-007 — Placa madre TPS2388x para PSE PoE preparados para la conformidad con la norma IEEE 802.3bt

BOOST-PSEMTHR-007 es la placa base para los controladores PSE TPS23880 y TPS23881. Esta placa contiene cuatro puertos de dos pares que se pueden usar para enviar hasta 30 W/puerto para aplicaciones IEEE 802.3at y dos puertos de cuatro pares que se pueden usar para enviar hasta 90 W/puerto para (...)

Guía del usuario: PDF
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Tarjeta secundaria

TPS23880EVM-008 — Tarjeta secundaria de EVM TPS23880 para aplicaciones PSE de PoE compatibles con IEEE 802.3bt

TPS23880EVM-008 es la tarjeta secundaria para evaluar el TPS23880, que es un equipo de alimentación PSE de alimentación a través de Ethernet (PoE) de 4 pares, tipo 4 y 8 canales con SRAM programable. Esta tarjeta hija proporciona circuitos de evaluación y referencia para el TPS23880, que es (...)

Guía del usuario: PDF
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Ejemplo de código o demostración

SLVC709 — TPS23880 PoE MSP430 Reference Code for Basic Applications

Productos y hardware compatibles
Ejemplo de código o demostración

SLVC720 — TPS23880 PoE MSP430 Reference Code for Port Power Management Applications

Productos y hardware compatibles
GUI para el módulo de evaluación (EVM)

SLVC772 — TPS2388x EVM GUI

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RTQ) 56 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos