TPS23881
- IEEE 802.3bt PSE solution for PoE 2 Type 3 or Type 4 Power over Ethernet applications
- Eight independent PSE channels
- Compatible with TI’s FirmPSE system firmware
- SRAM Programmable memory
- Programmable power limiting accuracy ±2.5%
- 200-mΩ current sense resistor
- Legacy PD capacitance measurement
- Selectable 2-pair or 4-pair port power allocations
- 15.4 W, 30 W, 45 W, 60 W, 75 W or 90 W
- Single and dual signature PD compatibility
- Dedicated 14-bit integrating current ADC per port
- Noise immune MPS for DC disconnect
- 2% current sensing accuracy
- 1- or 3-bit fast port shutdown input
- Auto-class discovery and power measurement
- Inrush and operational foldback protection
- Flexible processor controlled operating modes
- Auto, semi auto and manual / diagnostic
- Per port voltage monitoring and telemetry
- –40°C to +125°C temperature operation
- Ultra Low Alpha (ULA) packaging (TPS23881A)
The TPS23881 is an 8-channel power sourcing equipment (PSE) controller engineered to insert power onto Ethernet cables in accordance with the IEEE 802.3bt standard. The eight individual power channels can be configured in any combination of 2-Pair (1-channel) or 4-Pair (2-channels) PoE Ports. The PSE controller can detect powered devices (PDs) that have a valid signature, complete mutual identification, and apply power.
The TPS23881 improves on the TPS23880 with reduced current sense resistors, more accurate programmable power limiting, capacitance measurement and the ability to operate from ROM (see Device Comparison Table). The TPS23881 is also compatible with TIs FirmPSE system firmware, which provides a fully configurable solution for controlling multiple TPS23881 devices in systems offering up to 48-ports of 4-pair PoE power.
Programmable SRAM enables in-field firmware upgradability over I 2C to ensure IEEE compliance and interoperability with the latest PoE enabled devices. Dedicated per port ADCs provide continuous port current monitoring and the ability to perform parallel classification measurements for faster port turn on times. A ±2.5% accurate programmable port power limit provides the ability to expand the maximum power sourced from 90 W to upwards of 125 W. The 200-mΩ current sense resistor and external FET architecture allow designs to balance size, efficiency, thermal and solution cost requirements.
- Se encuentran disponibles el asesoramiento sobre el producto TPS23881 y la descarga del firmware más reciente. Solicitar ahora
- El firmware del sistema FirmPSE de TI, la GUI, el protocolo de interfaz de Host y el asesoramiento sobre FirmPSE están disponibles. Solicitar ahora
- Revisar Informe de pruebas de conformidad PoE 2 de TI para obtener confianza en la interoperabilidad con el TPS23881.
Documentación técnica
Tipo | Título | Fecha | ||
---|---|---|---|---|
* | Data sheet | TPS23881 Type-4 4-Pair 8-Channel PoE 2 PSE Controller with SRAM and 200 mΩ RSENSE datasheet (Rev. E) | PDF | HTML | 16 may 2023 |
Application brief | How to Load TPS2388x SRAM and Parity Code Over I2C (Rev. E) | PDF | HTML | 20 abr 2023 | |
Application brief | Choosing PoE PSE System Software Solutions | PDF | HTML | 03 ago 2021 | |
Test report | TPS23881 PoE2 Test Report | 26 may 2020 | ||
Technical article | The ABCs and 123s of PoE | PDF | HTML | 17 abr 2020 | |
Technical article | Get more out of your power supply with port power management | PDF | HTML | 11 nov 2019 | |
Design guide | 24-Port (4 Pair) Power Sourcing Equipment Reference Design for Multi-port Applic (Rev. A) | 15 oct 2019 | ||
Analog Design Journal | Challenges and solutions for PoE systems in Ethernet switches | 30 sep 2019 | ||
EVM User's guide | TPS23881EVM: PoE, PSE, TPS23881 Evaluation Module (Rev. A) | 08 ago 2019 | ||
EVM User's guide | TPS23881EVM: PoE, PSE, TPS23881 Evaluation Module | 24 abr 2019 |
Diseño y desarrollo
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
PSEMTHR24EVM-081 — Placa base para sistema PSE de 24 puertos compatible con IEEE 802.3bt
PSEMTHR24EVM-081 is the base board for the TPS23881 and TPS23882 PSE controllers. This board contains 24 2-Pair / 4-Pair ports that can that can be used to send up to 30W/port for IEEE 802.3at applications and up to 90W/port for IEEE 802.3bt applications.
PSEMCUDAUEVM-082 — Tarjeta secundaria MCU para sistema PSE de 24 puertos compatible con IEEE 802.3bt
PSEMCUDAUEVM-082 is the MSP430 MCU daughter card for TI's 24-port reference designs with the TPS23881 and TPS23882. This board combined with the GUI enables FirmPSE which is TI's production ready system firmware that can deliver system features such as port power management and the use of multiple (...)
TPS23881EVM-008 — Tarjeta secundaria TPS23881 para aplicaciones PSE de PoE compatibles con IEEE 802.3bt
TPS23881EVM-008 is the daughter card to evaluate the TPS23881 which is a 4-pair, type-4, 8-channel Power-over-Ethernet (PoE) PSE with 200mΩ sense resistor. This daughter card provides evaluation and reference circuitry for the TPS23881 which is suitable for high power PSE applications such as (...)
TPS23881EVM-083 — Tarjeta secundaria PSE compatible con IEEE 802.3bt para sistema PSE de 24 puertos
TPS23881EVM-008 is a 24-port (48-channel) daughter card to evaluate the TPS23881 which is a 4-pair, type-4, 8-channel Power-over-Ethernet (PoE) PSE with 200mΩ sense resistor. This daughter card provides evaluation and reference circuitry for the TPS23881 in high port count applications such (...)
BOOST-PSEMTHR-007 — Placa base TPS2388x para aplicaciones PoE PSE preparadas para IEEE 802.3bt
BOOST-PSEMTHR-007 is the base board for the TPS23880 and TPS23881 PSE controllers. This board contains four 2-pair ports that can be used to send up to 30W/port for IEEE 802.3at applications and two 4-pair ports that can be used to send up to 90W/port for IEEE 802.3bt applications.
SLVC772 — TPS2388x EVM GUI
Productos y hardware compatibles
Productos
Equipos de alimentación
Desarrollo de hardware
Placa de evaluación
Tarjeta secundaria
Kit de desarrollo
PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI
TIDA-050026-23881 — Diseño de referencia de equipos de fuente de alimentación de 24 puertos (PoE 2, 4 pares) para aplica
Paquete | Pasadores | Descargar |
---|---|---|
VQFN (RTQ) | 56 | Ver opciones |
Pedidos y calidad
- RoHS
- REACH
- Marcado del dispositivo
- Acabado de plomo/material de la bola
- Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
- Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
- Contenido del material
- Resumen de calificaciones
- Monitoreo continuo de confiabilidad
- Lugar de fabricación
- Lugar de ensamblaje
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
Soporte y capacitación
Foros de TI E2E™ con asistencia técnica de los ingenieros de TI
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.