Inicio Administración de potencia Interruptores y controladores de protección de potencia Fusibles electrónicos (intercambios en caliente integrados)

TPS2421-1

ACTIVO

eFuse de 1.8-5.5 A, 3 V a 20 V y 33 mΩ

Detalles del producto

Vabsmax_cont (V) 25 Vin (max) (V) 20 Vin (min) (V) 3 Current limit (max) (A) 5.5 Current limit (min) (A) 1.8 Features Adjustable current limit, Fault output, Overcurrent protection, Power good signal, Thermal shutdown UL recognition UL2367 Overcurrent response Circuit breaker, Current limiting Fault response Latch-off Ron (typ) (mΩ) 33 Rating Catalog Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.0039 Quiescent current (Iq) (max) (A) 0.005 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
Vabsmax_cont (V) 25 Vin (max) (V) 20 Vin (min) (V) 3 Current limit (max) (A) 5.5 Current limit (min) (A) 1.8 Features Adjustable current limit, Fault output, Overcurrent protection, Power good signal, Thermal shutdown UL recognition UL2367 Overcurrent response Circuit breaker, Current limiting Fault response Latch-off Ron (typ) (mΩ) 33 Rating Catalog Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.0039 Quiescent current (Iq) (max) (A) 0.005 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
HSOIC (DDA) 8 29.4 mm² (4.9 mm × 6 mm)
  • Integrated Pass MOSFET
  • Up to 20-V Bus Operation
  • Programmable Fault Current
  • Current Limit Proportionally Larger than Fault Current
  • Programmable Fault Timer
  • Internal MOSFET Power Limiting
  • Latch-Off on Fault (TPS2421-1) and Retry (TPS2421-2) Versions
  • SO-8 PowerPad™ Package
  • –40°C to +125°C Junction Temperature Range
  • UL2367 Recognized - File Number E169910
  • Integrated Pass MOSFET
  • Up to 20-V Bus Operation
  • Programmable Fault Current
  • Current Limit Proportionally Larger than Fault Current
  • Programmable Fault Timer
  • Internal MOSFET Power Limiting
  • Latch-Off on Fault (TPS2421-1) and Retry (TPS2421-2) Versions
  • SO-8 PowerPad™ Package
  • –40°C to +125°C Junction Temperature Range
  • UL2367 Recognized - File Number E169910

The TPS2421 device provides highly integrated hot swap power management and superior protection in applications where the load is powered by busses up to 20 V. The TPS2421 device is well suited to standard bus voltages as low as 3.3 V because of the maximum-UV turnon threshold of 2.9 V. These devices are very effective in systems where a voltage bus must be protected to prevent shorts from interrupting or damaging the unit. The TPS2421 device is an easy to use devices in an 8-pin PowerPad™ SO-8 package.

The TPS2421 device has multiple programmable protection features. Load protection is accomplished by a non-current limiting fault threshold, a hard current limit, and a fault timer. The current dual thresholds allow the system to draw short high current pulses, while the fault timer is running, without causing a voltage droop at the load. An example of this is a disk drive startup. This technique is ideal for loads that experience brief high demand, but benefit from protection levels in-line with their average current draw.

Hotswap MOSFET protection is provided by power limit circuitry which protects the internal MOSFET against SOA related failures.

The TPS2421 device is available in latch-off on fault (TPS2421-1) and retry on fault (TPS2421-2).

The TPS2421 device provides highly integrated hot swap power management and superior protection in applications where the load is powered by busses up to 20 V. The TPS2421 device is well suited to standard bus voltages as low as 3.3 V because of the maximum-UV turnon threshold of 2.9 V. These devices are very effective in systems where a voltage bus must be protected to prevent shorts from interrupting or damaging the unit. The TPS2421 device is an easy to use devices in an 8-pin PowerPad™ SO-8 package.

The TPS2421 device has multiple programmable protection features. Load protection is accomplished by a non-current limiting fault threshold, a hard current limit, and a fault timer. The current dual thresholds allow the system to draw short high current pulses, while the fault timer is running, without causing a voltage droop at the load. An example of this is a disk drive startup. This technique is ideal for loads that experience brief high demand, but benefit from protection levels in-line with their average current draw.

Hotswap MOSFET protection is provided by power limit circuitry which protects the internal MOSFET against SOA related failures.

The TPS2421 device is available in latch-off on fault (TPS2421-1) and retry on fault (TPS2421-2).

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TPS25946 ACTIVO eFuse de 28 mΩ, 2.7 V a 23 V, 5.5 A, con soporte de corriente bidireccional Smaller package, better specifications but no circuit breaker response for over-current condition.
TPS25981 ACTIVO eFuse de 2.7 V a 16 V, 10 A, 6 mΩ con temporizador de supresión de sobrecorriente transitoria eFuse with higher current, lower RON and smaller package option.
TPS2597 ACTIVO eFuse de 9.8 mΩ, 2.7 V–23 V, 7 A, con monitor de corriente preciso y supresión de sobrecorriente tra eFuse with higher current, lower RON, and smaller package for better power density.

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 6
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos TPS2421-x 5-A, 20-V Integrated FET Hot Swap datasheet (Rev. K) PDF | HTML 15/05/2019
Certificado TPS2421-1 UL Certificate of Compliance IEC 60950-1 24/04/2020
Información sobre seguridad funcional eFuse: Safety Certification and why it Matters 18/03/2020
Guía de selección Power Management Guide 2018 (Rev. R) 25/06/2018
Nota sobre la aplicación Basics of eFuses (Rev. A) 5/04/2018
Guía del usuario TPS2420 Reference Design 27/03/2009

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS2421-1EVM-02 — Módulo de evaluación de controlador de intercambio en caliente TPS2421-1

The TPS2421-1EVM-02 is a 3-V to 18-V module using the TPS2421-1 hot swap controller with integrated MOSFET. At power on, the output is power limited to control inrush current and protect the MOSFET. On an over-current condition, the controller interrupts power to the load at high speed and signals (...)

Guía del usuario: PDF
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Herramienta de cálculo

SLUC427 — TPS2421 Design Calculator Tool

Productos y hardware compatibles
Herramienta de cálculo

TVS-RECOMMENDATION-CALC — TVS diode recommendation tool

This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
HSOIC (DDA) 8 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos