TCAN6062-Q1
- AEC Q100 Qualified for automotive applications
- Meets the requirements of ISO 11898-2:2024 Annex A: HS-PMA with SIC mode and FAST mode (CAN XL)
- Functional Safety-Capable
-
Documentation will be available upon device release to aid in functional safety system design
-
- Supports up to 20Mbps signaling rate in FAST mode and up to 8Mbps in SIC mode
- FAST TX mode and FAST RX mode allow for CAN XL data signaling
- Actively improves the bus signal by reducing ringing effects in complex topologies
- Mixed mode network with CAN FD, CAN SIC possible
- VIO level shifting supports 1.71V to 5.5V
- Support for 12V and 24V battery applications
- Receiver common mode input voltage: ±12V
- Protection features:
- IEC ESD protection on bus pins
- Bus fault protection: ±58V
- Undervoltage protection on VCC and VIO supply terminals
- TXD dominant time-out (TXD DTO)
- Thermal shutdown protection (TSD)
- Operating Modes
- Normal mode: SIC, FAST TX, FAST RX
- Low-power standby mode supporting remote wake-up request
- Passive behavior when unpowered
- Bus and logic terminals are high impedance (no load to operating bus or application)
- Hot plug capable: power up/down glitch free operation on bus and RXD output
- Defined device behavior with floating logic pins and in undervoltage supply conditions
- Available in SOIC (8) and leadless 3mm × 3mm VSON (8) package with wettable flanks for improved automated optical inspection (AOI) capability
The TCAN6062-Q1 is a high-speed Controller Area Network (CAN) transceiver that meets the physical layer requirements of the ISO 11898-2:2024 Annex A (CAN XL) specification. The device supports PWM decoding on TXD pin allowing it to operate in SIC mode, FAST TX mode, and FAST RX mode. For SIC mode, the device reduces signal ringing at dominant-to-recessive edge and enables higher throughput in complex network topologies. For FAST TX mode, device uses H-bridge architecture to actively drive logic states. This driver architecture along with FAST RX thresholds centered around zero and input logic buffer (TXD) threshold centered around 50% enables high speed communication up to 20Mbps in multidrop networks. FAST RX mode uses a high-speed comparator to detect bus traffic up to 20Mbps and convert it to received logic data.
The TCAN6062-Q1 includes internal logic level translation via the VIO logic supply terminal to allow for interfacing directly to 1.8V, 2.5V, 3.3V, or 5V controllers. The transceiver supports low power standby mode which allows remote wake-up via CAN bus compliant with the ISO 11898-2:2024 Annex A defined wake-up pattern (WUP). The device also includes many protection features, including undervoltage detection, thermal shutdown (TSD), driver dominant timeout (TXD DTO), and ±58V bus fault protection.
These devices are pin-compatible to 8-pin CAN FD and CAN SIC transceivers such as TCAN1044A(V)-Q1 and/or TCAN1472(V)-Q1.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TCAN6062-Q1 Automotive CAN XL Transceiver with Standby Mode datasheet | PDF | HTML | 2025/09/17 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TCAN-SOIC8-EVM — 8핀 SOIC 또는 SOT 패키지의 CAN 트랜시버용 범용 평가 모듈
TCAN-SOIC8-EVM은 사용자가 텍사스 인스트루먼트 8핀 CAN 트랜시버 장치를 평가할 수 있는 옵션을 제공하도록 개발되었습니다. 보드는 구성 요소 풋프린트 및 점퍼 옵션을 통해 평가 유연성을 제공합니다.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
| VSON (DRB) | 8 | Ultra Librarian |
| — (—) | — |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.