首頁 電源管理 AC/DC 和 DC/DC 轉換器 (整合式 FET)
首頁
電源管理
AC/DC 和 DC/DC 轉換器 (整合式 FET)
最新

LM70880-Q1

預覽

車用、高密度、4.5V 至 80V 輸入、8A 低 EMI 同步 DC/DC 降壓轉換器

立即訂購
產品規格表

LM70880-Q1

預覽
產品規格表 立即訂購

產品詳細資料

Rating Automotive Operating temperature range (°C) -40 to 150 Type DC/DC converter Iout (max) (A) 8 Vin (min) (V) 4.5 Vin (max) (V) 80 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Adjustable switching frequency, Auto Mode, Automotive load dump, Enable, Fixed Output, Forced PWM, Frequency synchronization, Low Noise, Over Current Protection, Power good, Soft Start Fixed, Spread Spectrum, Stackable, Thermal shutdown, UVLO adjustable Control mode Peak-Current Vout (min) (V) 0.8 Vout (max) (V) 55 Iq (typ) (A) 0.0000065
Rating Automotive Operating temperature range (°C) -40 to 150 Type DC/DC converter Iout (max) (A) 8 Vin (min) (V) 4.5 Vin (max) (V) 80 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Adjustable switching frequency, Auto Mode, Automotive load dump, Enable, Fixed Output, Forced PWM, Frequency synchronization, Low Noise, Over Current Protection, Power good, Soft Start Fixed, Spread Spectrum, Stackable, Thermal shutdown, UVLO adjustable Control mode Peak-Current Vout (min) (V) 0.8 Vout (max) (V) 55 Iq (typ) (A) 0.0000065
VQFN (RRX) 29 36 mm² 6 x 6
  • AEC-Q100 qualified for automotive applications:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature
  • Synchronous DC/DC converter with a versatile buck controller and robust power MOSFETs
    • Wide input voltage range: 4.5 V to 80 V
    • 1% accurate, fixed 3.3 V, 5 V, 12 V, or adjustable outputs from 0.8 V to 55 V
    • Dual-phase control enables paralleling two devices for higher current applications
    • Shutdown mode current: 2.3 µA
    • No-load sleep current: 6.5 µA
  • Optimized for low EMI requirements
    • Facilitates CISPR 25 Class 5 compliance
    • Pin-selectable ±8% dual-random spread spectrum reduces peak emissions
    • Switching frequency: 200 kHz to 2.2 MHz
    • Pin-configurable AUTO or FPWM operation
  • Inherent protection features for robust design
    • Internal hiccup-mode overcurrent protection
    • Enable, power-good, and thermal shutdown
    • Internal or external loop compensation
  • 6-mm × 6-mm thermally optimized, RoHS compliant, QFN-29 package with Pb-Free plating
  • AEC-Q100 qualified for automotive applications:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature
  • Synchronous DC/DC converter with a versatile buck controller and robust power MOSFETs
    • Wide input voltage range: 4.5 V to 80 V
    • 1% accurate, fixed 3.3 V, 5 V, 12 V, or adjustable outputs from 0.8 V to 55 V
    • Dual-phase control enables paralleling two devices for higher current applications
    • Shutdown mode current: 2.3 µA
    • No-load sleep current: 6.5 µA
  • Optimized for low EMI requirements
    • Facilitates CISPR 25 Class 5 compliance
    • Pin-selectable ±8% dual-random spread spectrum reduces peak emissions
    • Switching frequency: 200 kHz to 2.2 MHz
    • Pin-configurable AUTO or FPWM operation
  • Inherent protection features for robust design
    • Internal hiccup-mode overcurrent protection
    • Enable, power-good, and thermal shutdown
    • Internal or external loop compensation
  • 6-mm × 6-mm thermally optimized, RoHS compliant, QFN-29 package with Pb-Free plating

The LM70880-Q1 is a compact, easy-to-use, 4.5-V to 80-V, ultra-low I Q, synchronous step-down DC/DC converter featuring a versatile buck controller and a pair of power MOSFETs designed for delivering of up to 8 A of output current at fixed output voltages of 3.3 V, 5 V, 12 V, or an adjustable output.

The converter uses a peak current-mode control architecture for easy loop compensation, fast transient response, and excellent load and line regulation. A pair of LM70880-Q1 converters can be set up in an interleaved mode (paralleled outputs) with accurate current sharing for applications requiring up to 16 A of output current.

The LM70880-Q1 features a unique Dual Random Spread Spectrum (DRSS) function that combines a low-frequency triangular modulation with a high-frequency cycle-by-cycle random modulation for improved EMI performance across a high range of radio frequency bands.

Additional features of the LM70880-Q1 include user-selectable diode emulation for lower current consumption at light-load conditions, open-drain Power-Good flag for fault reporting and output monitoring, precision enable input, monotonic start-up into prebiased load, integrated VCC bias supply regulator, internal 2.75-ms soft-start time, and thermal shutdown protection with automatic recovery.

The LM70880-Q1 converter comes in a 6-mm × 6-mm thermally-optimized, 29-pin QFN package. The three die-attach pads (VIN, SW, and PGND) improve thermal performance and board level reliability (BLR).

The LM70880-Q1 is a compact, easy-to-use, 4.5-V to 80-V, ultra-low I Q, synchronous step-down DC/DC converter featuring a versatile buck controller and a pair of power MOSFETs designed for delivering of up to 8 A of output current at fixed output voltages of 3.3 V, 5 V, 12 V, or an adjustable output.

The converter uses a peak current-mode control architecture for easy loop compensation, fast transient response, and excellent load and line regulation. A pair of LM70880-Q1 converters can be set up in an interleaved mode (paralleled outputs) with accurate current sharing for applications requiring up to 16 A of output current.

The LM70880-Q1 features a unique Dual Random Spread Spectrum (DRSS) function that combines a low-frequency triangular modulation with a high-frequency cycle-by-cycle random modulation for improved EMI performance across a high range of radio frequency bands.

Additional features of the LM70880-Q1 include user-selectable diode emulation for lower current consumption at light-load conditions, open-drain Power-Good flag for fault reporting and output monitoring, precision enable input, monotonic start-up into prebiased load, integrated VCC bias supply regulator, internal 2.75-ms soft-start time, and thermal shutdown protection with automatic recovery.

The LM70880-Q1 converter comes in a 6-mm × 6-mm thermally-optimized, 29-pin QFN package. The three die-attach pads (VIN, SW, and PGND) improve thermal performance and board level reliability (BLR).
open-in-new 尋找其它 AC/DC 和 DC/DC 轉換器 (整合式 FET)
下載 觀看有字幕稿的影片 影片
要求更多資訊

現已提供完整的產品規格表和其他文件。請立即索取

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet LM708x0-Q1 80-V, 8-A/6-A/4-A, Automotive, High-Efficiency Buck Converters Optimized for High Power Density datasheet PDF | HTML 2023年 9月 6日
EVM User's guide LM70880-Q1 Buck Converter Evaluation Module User's Guide (Rev. A) PDF | HTML 2024年 3月 6日
Certificate LM70880QEVM EU Declaration of Conformity (DoC) 2023年 7月 20日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LM70880QEVM — LM70880-Q1 評估模組

LM70880QEVM 高密度評估模組設計用於使用 8V 至 72V 範圍的穩壓或非穩壓高電壓輸入軌，在負載電流高達 8A 時產生嚴格穩壓的 5V 輸出電壓。LM70880-Q1 具有高轉換效率、卓越的熱性能和先進的 EMI 抑制功能。
使用指南: PDF | HTML
TI.com 無法提供
參考設計

PMP31291 — 27W 反相降壓升壓參考設計

此參考設計是靈活且精巧的電源供應器，可提供負輸出電壓軌。此設計包括 LM70880-Q1 裝置 (80V、8A 高效率降壓轉換器)。輸出電壓值可在三個預先定義的設定中選擇：-7V/-10V/-11V。
Test report: PDF
封裝 引腳 下載
VQFN (RRX) 29 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片