首頁 電源管理 AC/DC 和 DC/DC 轉換器 (整合式 FET)

LMM104RM0

預覽

1.6kW 48V 至 12V 穩壓中間匯流排轉換器

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 167 Vin (max) (V) 60 Vin (min) (V) 40 Vout (max) (V) 13.6 Vout (min) (V) 11 Features Adaptive/Dynamic Voltage Scaling, Adjustable current limit, Alert Function, Constant current / constant voltage (CC/CV), Current Sharing, Current limit, Cycle-by-cycle over-current protection, Digital output, Enable pin, Fault Diagnostics, Fixed Output, GaN support, Integrated Current Sensing, Load Sharing, Over Temperature Protection, Over Voltage Protection, PMBus, Power good, Temperature sensing, Undervoltage Lock Out (UVLO) EMI features Integrated capacitors, Switching slew rate control Control mode Current Switching frequency (min) (kHz) 0.2 Switching frequency (max) (kHz) 0.2 Operating temperature range (°C) -40 to 125 Type Module
Rating Catalog Topology Buck Iout (max) (A) 167 Vin (max) (V) 60 Vin (min) (V) 40 Vout (max) (V) 13.6 Vout (min) (V) 11 Features Adaptive/Dynamic Voltage Scaling, Adjustable current limit, Alert Function, Constant current / constant voltage (CC/CV), Current Sharing, Current limit, Cycle-by-cycle over-current protection, Digital output, Enable pin, Fault Diagnostics, Fixed Output, GaN support, Integrated Current Sensing, Load Sharing, Over Temperature Protection, Over Voltage Protection, PMBus, Power good, Temperature sensing, Undervoltage Lock Out (UVLO) EMI features Integrated capacitors, Switching slew rate control Control mode Current Switching frequency (min) (kHz) 0.2 Switching frequency (max) (kHz) 0.2 Operating temperature range (°C) -40 to 125 Type Module
UNKNOWN (EUX) 14 See data sheet
  • Supports wide input voltage range: 40V to 60V
  • Rated output power: 1.6kW
  • Peak power: 2.4kW (< 200ms)
  • Fully regulated output voltage: 12V
  • Typical peak efficiency: 97.6% at 48V and 97.6% at 54V
  • Typical full load efficiency: 96.8% at 48V and 96.6% at 54V
  • Non-isolated design
  • Typical switching frequency: 200kHz
  • Supports PMBus communication
  • Fully protected:
    • Input UVLO
    • Input OVP
    • Output OVP
    • Output OCP
    • OTP
  • Typical output voltage ripple: 100mV
  • Heat spreader for top side cooling
  • Mechanical dimensions: 58.4mm × 36.8mm × 15.5mm
  • Supports wide input voltage range: 40V to 60V
  • Rated output power: 1.6kW
  • Peak power: 2.4kW (< 200ms)
  • Fully regulated output voltage: 12V
  • Typical peak efficiency: 97.6% at 48V and 97.6% at 54V
  • Typical full load efficiency: 96.8% at 48V and 96.6% at 54V
  • Non-isolated design
  • Typical switching frequency: 200kHz
  • Supports PMBus communication
  • Fully protected:
    • Input UVLO
    • Input OVP
    • Output OVP
    • Output OCP
    • OTP
  • Typical output voltage ripple: 100mV
  • Heat spreader for top side cooling
  • Mechanical dimensions: 58.4mm × 36.8mm × 15.5mm

The LMM104RM0 module is an evolution within the TI intermediate bus converters family. This module is a high-efficiency, regulated, non-isolated, 1.6kW thermal design power (TDP), in a standard quarter-brick footprint. The modular design provides a high-power density power conversion from 48V bus to a regulated 12V output, with options for parallel connection with multiple modules and current sharing through active-current control.

The LMM104RM0 module is an evolution within the TI intermediate bus converters family. This module is a high-efficiency, regulated, non-isolated, 1.6kW thermal design power (TDP), in a standard quarter-brick footprint. The modular design provides a high-power density power conversion from 48V bus to a regulated 12V output, with options for parallel connection with multiple modules and current sharing through active-current control.

下載 觀看有字幕稿的影片 影片
Request more information

The full data sheet and additional document(s), resources etc. are available. Request now

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet LMM104RM0 Regulated 48V − 12V Intermediate Bus Converter datasheet PDF | HTML 2025年 9月 30日
Technical article 為下一波 AI 運算成長做好準備:功率傳輸的權衡考量 PDF | HTML 2025年 11月 26日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

設計工具

LMM104RM0-DESIGN 1.6kW 48-to-12V regulated intermediate bus converter

1.6kW 48-to-12V regulated intermediate bus converter
支援產品和硬體

支援產品和硬體

產品
AC/DC 和 DC/DC 轉換器 (整合式 FET)
LMM104RM0 1.6kW 48V 至 12V 穩壓中間匯流排轉換器
封裝 針腳 CAD 符號、佔位空間與 3D 模型
UNKNOWN (EUX) 14 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片