LMZM33604

現行

3.5V 至 36V 輸入、1V 至 20V 輸出、4A 電源模組

立即訂購

產品規格表

document-pdfAcrobat LMZM33604 3.5-V to 36-V Input, 1-V to 20-V Output, 4-A Power Module datasheet (Rev. A) (英文) PDF | HTML

現在提供此產品的更新版本

open-in-new

比較替代產品

功能相同，但針腳輸出與所比較的裝置不同。

TLVM13640

現行

採用 5 公釐 x 5.5 公釐增強型 HotRod™ QFN 的 36-V 輸入、1-V 至 6-V 輸出、4- A 降壓電源模組 Reduced output voltage range and basic features

TPSM63604

現行

36-V 輸入、16-V 輸出、4-A 同步降壓 DC-DC 電源模組 Significantly smaller footprint, lower EMI, higher efficiency, and optional spread spectrum.

LMZM33604

現行

產品規格表

立即訂購

產品詳細資料

Rating

Catalog

Topology

Buck, Inverting Buck-Boost, Synchronous Buck

Iout (max) (A)

4

Vin (max) (V)

36

Vin (min) (V)

3.5

Vout (max) (V)

20

Vout (min) (V)

1

Features

EMI Tested, Enable, Frequency synchronization, Light-load efficiency, Power good, Tracking

Operating temperature range (°C)

-40 to 105

Type

Module

Duty cycle (max) (%)

90

Control mode

current mode

Switching frequency (min) (kHz)

350

Switching frequency (max) (kHz)

2200

Rating

Catalog

Topology

Buck, Inverting Buck-Boost, Synchronous Buck

Iout (max) (A)

4

Vin (max) (V)

36

Vin (min) (V)

3.5

Vout (max) (V)

20

Vout (min) (V)

1

Features

EMI Tested, Enable, Frequency synchronization, Light-load efficiency, Power good, Tracking

Operating temperature range (°C)

-40 to 105

Type

Module

Duty cycle (max) (%)

90

Control mode

current mode

Switching frequency (min) (kHz)

350

Switching frequency (max) (kHz)

2200

B3QFN (RLX)

41

160 mm² (16 mm × 10 mm)

Small complete solution size: < 250 mm²
- Requires as few as 4 external components
- 16 mm × 10 mm × 4 mm QFN package
Supports 5-V, 12-V, 24-V, 28-V input rails
- 1-V to 20-V Output voltage range
- Pin compatible with 6-A LMZM33606
Meets EN55011 radiated emissions
Configurable as negative output voltage
Adjustable features for design flexibility
- Switching frequency (350 kHz to 2.2 MHz)
- Synchronization to an external clock
- Selectable auto mode or FPWM mode
  - Auto: boost efficiency at light loads
  - FPWM: Fixed frequency over entire load
- Adjustable soft start and tracking input
- Precision enable to program system UVLO
Protection features
- Hiccup mode current limit
- Overtemperature protection
- Power-good output
Operate in rugged environments
- Up to 50-W output power at 85°C, no airflow
- Operating junction range: –40°C to +125°C
- Operating ambient range: –40°C to +105°C
- Shock and vibration tested to Mil-STD-883D

Small complete solution size: < 250 mm²
- Requires as few as 4 external components
- 16 mm × 10 mm × 4 mm QFN package
Supports 5-V, 12-V, 24-V, 28-V input rails
- 1-V to 20-V Output voltage range
- Pin compatible with 6-A LMZM33606
Meets EN55011 radiated emissions
Configurable as negative output voltage
Adjustable features for design flexibility
- Switching frequency (350 kHz to 2.2 MHz)
- Synchronization to an external clock
- Selectable auto mode or FPWM mode
  - Auto: boost efficiency at light loads
  - FPWM: Fixed frequency over entire load
- Adjustable soft start and tracking input
- Precision enable to program system UVLO
Protection features
- Hiccup mode current limit
- Overtemperature protection
- Power-good output
Operate in rugged environments
- Up to 50-W output power at 85°C, no airflow
- Operating junction range: –40°C to +125°C
- Operating ambient range: –40°C to +105°C
- Shock and vibration tested to Mil-STD-883D

The LMZM33604 power module is an easy-to-use integrated power solution that combines a 4-A DC/DC converter with power MOSFETs, a shielded inductor, and passives in a low-profile package. This power solution requires as few as four external components and eliminates the loop compensation and inductor part selection from the design process.

The 16 mm × 10 mm × 4 mm, 41-pin, QFN package is easy to solder onto a printed circuit board and allows for a compact, low-profile point-of-load design. The LMZM33604 feature set includes power good, adjustable soft start, tracking, synchronization, programmable UVLO, prebias start-up, selectable auto or FPWM modes, as well as overcurrent and overtemperature protection. The LMZM33604 can be configured as negative output voltage for inverting applications.

The LMZM33604 power module is an easy-to-use integrated power solution that combines a 4-A DC/DC converter with power MOSFETs, a shielded inductor, and passives in a low-profile package. This power solution requires as few as four external components and eliminates the loop compensation and inductor part selection from the design process.

The 16 mm × 10 mm × 4 mm, 41-pin, QFN package is easy to solder onto a printed circuit board and allows for a compact, low-profile point-of-load design. The LMZM33604 feature set includes power good, adjustable soft start, tracking, synchronization, programmable UVLO, prebias start-up, selectable auto or FPWM modes, as well as overcurrent and overtemperature protection. The LMZM33604 can be configured as negative output voltage for inverting applications.

filter

尋找其它電源模組 (整合式電感器)

下載觀看有字幕稿的影片影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 3

重要文件	類型	標題	格式選項	日期
*	資料表	LMZM33604 3.5-V to 36-V Input, 1-V to 20-V Output, 4-A Power Module datasheet (Rev. A)	PDF \| HTML	2019/5/20
	應用說明	Soldering Considerations for Power Modules (Rev. C)	PDF \| HTML	2024/3/14
	應用說明	Practical Thermal Design With DC/DC Power Modules (Rev. A)		2019/11/20