首頁 電源管理 監控器和重設 IC 重設與看門狗 IC
首頁
電源管理
監控器和重設 IC
重設與看門狗 IC

MCP809

現行

低電位作動 3 接腳重設 IC

立即訂購
產品規格表

MCP809

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Number of supplies monitored 1 Threshold voltage 1 (typ) (V) 2.93 Features Ease-of-use, Undervoltage monitor only Reset threshold accuracy (%) 5 Iq (typ) (mA) 0.015 Output driver type/reset output Active-low, Push-Pull Time delay (ms) 240 Watchdog timer WDI (s) None Supply voltage (min) (V) 1.2 Supply voltage (max) (V) 5.5 Operating temperature range (°C) -40 to 105
Rating Catalog Number of supplies monitored 1 Threshold voltage 1 (typ) (V) 2.93 Features Ease-of-use, Undervoltage monitor only Reset threshold accuracy (%) 5 Iq (typ) (mA) 0.015 Output driver type/reset output Active-low, Push-Pull Time delay (ms) 240 Watchdog timer WDI (s) None Supply voltage (min) (V) 1.2 Supply voltage (max) (V) 5.5 Operating temperature range (°C) -40 to 105
SOT-23 (DBZ) 3 6.9204 mm² 2.92 x 2.37
  • Precise Monitoring of 3V, 3.3V, and 5V Supply Voltages
  • Fully specified over temperature
  • 140ms min. Power-On Reset Pulse Width, 240ms Typical
    •  Active-low RESET Output (MCP809)
    •  Active-high RESET Output (MCP810)
  • Specified RESET Output Valid for VCC≥1V
  • Low Supply Current, 15µA typical
  • Power supply transient immunity

All trademarks are the property of their respective owners.

  • Precise Monitoring of 3V, 3.3V, and 5V Supply Voltages
  • Fully specified over temperature
  • 140ms min. Power-On Reset Pulse Width, 240ms Typical
    •  Active-low RESET Output (MCP809)
    •  Active-high RESET Output (MCP810)
  • Specified RESET Output Valid for VCC≥1V
  • Low Supply Current, 15µA typical
  • Power supply transient immunity

All trademarks are the property of their respective owners.

The MCP809/810 microprocessor supervisory circuits can be used to monitor the power supplies in microprocessor and digital systems. They provide a reset to the microprocessor during power-up, power-down and brown-out conditions.

The function of the MCP809/810 is to monitor the VCC supply voltage, and assert a reset signal whenever this voltage declines below the factory-programmed reset threshold. The reset signal remains asserted for 240ms after VCC rises above the threshold. The MCP809 has an active-low RESET output, while the MCP810 has an active-high RESET output.

Seven standard reset voltage options are available, suitable for monitoring 5V, 3.3V, and 3V supply voltages.

With a low supply current of only 15µA, the MCP809/810 are ideal for use in portable equipment. The MCP809/MCP810 are available in the 3-pin SOT23 package.

The MCP809/810 microprocessor supervisory circuits can be used to monitor the power supplies in microprocessor and digital systems. They provide a reset to the microprocessor during power-up, power-down and brown-out conditions.

The function of the MCP809/810 is to monitor the VCC supply voltage, and assert a reset signal whenever this voltage declines below the factory-programmed reset threshold. The reset signal remains asserted for 240ms after VCC rises above the threshold. The MCP809 has an active-low RESET output, while the MCP810 has an active-high RESET output.

Seven standard reset voltage options are available, suitable for monitoring 5V, 3.3V, and 3V supply voltages.

With a low supply current of only 15µA, the MCP809/810 are ideal for use in portable equipment. The MCP809/MCP810 are available in the 3-pin SOT23 package.
filter 尋找其它 重設與看門狗 IC
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
TLV809E 現行 具有低電位作動推挽輸出的低功耗電壓監控器 (重設 IC) Enhanced threshold accuracy (0.5%) and lower quiescent current (250nA) with time delay options

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet MCP809/MCP810 3-Pin Microprocessor Reset Circuits datasheet (Rev. A) 2013年 5月 1日
Selection guide Voltage Supervisors (Reset ICs) Quick Reference Guide (Rev. H) 2020年 2月 28日
E-book Voltage Supervisor and Reset ICs: Tips, Tricks and Basics 2019年 6月 28日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-23 (DBZ) 3 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片