首頁 電源管理 高壓側開關和控制器 高壓側開關
首頁
電源管理
高壓側開關和控制器
高壓側開關
最新

TPS2HC120-Q1

現行

具有低功率模式的車用、二通道 120mΩ 智慧型高壓側開關

立即訂購
產品規格表

TPS2HC120-Q1

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 2 Rating Automotive Operating voltage (max) (V) 18 Operating voltage (min) (V) 3 Ron (typ) (mΩ) 120 Imax (A) 2.5 Current limit (max) (A) 5 Current limit (min) (A) 0.25 Current limit type Adjustable FET Internal Features Current sense/monitor, Digital output, Thermal shutdown, Under voltage lock out Current sense accuracy ±3% @ 1A Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown
Number of channels 2 Rating Automotive Operating voltage (max) (V) 18 Operating voltage (min) (V) 3 Ron (typ) (mΩ) 120 Imax (A) 2.5 Current limit (max) (A) 5 Current limit (min) (A) 0.25 Current limit type Adjustable FET Internal Features Current sense/monitor, Digital output, Thermal shutdown, Under voltage lock out Current sense accuracy ±3% @ 1A Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown
HVSSOP (DGQ) 28 34.79 mm² 7.1 x 4.9
  • Dual-channel 120mΩ smart high-side switch with full diagnostics
    • Open-drain status output
    • Current sense analog output
  • Wide operating voltage 3V to 28V
  • Low power mode (LPM) with automatic entry and exit
    • IQ,LPM <20µA/ch with both channels ON and in LPM mode
  • Ultra-low standby current, <1µA at 25°C
  • Selectable current limit, 0.25A to 5A
  • Protection
    • Overload and short-circuit protection
    • Thermal shutdown and swing protection
    • Inductive load negative voltage clamp
    • Loss-of-GND, loss-of-battery, and reverse battery protection
  • Diagnostics
    • Global fault report for fast interrupt
    • Overcurrent and short-to-ground detection
    • Open-load and short-to-battery detection
  • Qualified for automotive applications
    • AEC-Q100 qualified with the following results:
      • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
    • Electrical transient disturbance immunity certification of ISO7637-2 and ISO16750-2
  • 28-pin thermally-enhanced HVSSOP package
  • Dual-channel 120mΩ smart high-side switch with full diagnostics
    • Open-drain status output
    • Current sense analog output
  • Wide operating voltage 3V to 28V
  • Low power mode (LPM) with automatic entry and exit
    • IQ,LPM <20µA/ch with both channels ON and in LPM mode
  • Ultra-low standby current, <1µA at 25°C
  • Selectable current limit, 0.25A to 5A
  • Protection
    • Overload and short-circuit protection
    • Thermal shutdown and swing protection
    • Inductive load negative voltage clamp
    • Loss-of-GND, loss-of-battery, and reverse battery protection
  • Diagnostics
    • Global fault report for fast interrupt
    • Overcurrent and short-to-ground detection
    • Open-load and short-to-battery detection
  • Qualified for automotive applications
    • AEC-Q100 qualified with the following results:
      • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
    • Electrical transient disturbance immunity certification of ISO7637-2 and ISO16750-2
  • 28-pin thermally-enhanced HVSSOP package

TPS2HC120-Q1 is an automotive dual-channel, smart high-side switch, with integrated NMOS power FET and charge pump, designed to meet the requirements of 12V automotive battery systems. The low RON (120mΩ) minimizes the device power dissipation when driving a wide range of output load current up to 2A when both channels are enabled or 2.5A when only one channel is enabled.

The device integrates protection features such as thermal shutdown, output clamp, and current limit. These features improve system robustness during fault events such as short circuit. TPS2HC120-Q1 implements a selectable current limiting circuit that improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current. The device offers 10 selectable current limit settings (0.25A to 5A) based on the external resistor used on the ILIM pin. The device also provides an accurate load current sense that allows for improved load diagnostics such as overload and open-load detection, which enables better predictive maintenance.

TPS2HC120-Q1 is available in a 28-pin, 4.9mm × 7.1mm HVSSOP leaded package with 0.5mm pin pitch minimizing the PCB footprint.

TPS2HC120-Q1 is an automotive dual-channel, smart high-side switch, with integrated NMOS power FET and charge pump, designed to meet the requirements of 12V automotive battery systems. The low RON (120mΩ) minimizes the device power dissipation when driving a wide range of output load current up to 2A when both channels are enabled or 2.5A when only one channel is enabled.

The device integrates protection features such as thermal shutdown, output clamp, and current limit. These features improve system robustness during fault events such as short circuit. TPS2HC120-Q1 implements a selectable current limiting circuit that improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current. The device offers 10 selectable current limit settings (0.25A to 5A) based on the external resistor used on the ILIM pin. The device also provides an accurate load current sense that allows for improved load diagnostics such as overload and open-load detection, which enables better predictive maintenance.

TPS2HC120-Q1 is available in a 28-pin, 4.9mm × 7.1mm HVSSOP leaded package with 0.5mm pin pitch minimizing the PCB footprint.
filter 尋找其它 高壓側開關
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet TPS2HC120-Q1 120mΩ Dual-Channel Smart High-Side Switch datasheet (Rev. A) PDF | HTML 2025年 8月 12日
Certificate TPS2HC120EVM EU Declaration of Conformity (DoC) 2025年 1月 24日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS2HC120EVM — TPS2HC120-Q1 評估模組

TPS2HC120EVM 是硬體評估模組 (EVM)，可用於評估 TPS2HC120-Q1 高壓側開關的功能和性能。評估模組配備齊全，可測試 TPS2HC120-Q1，以簡化裝置與各種電源系統應用的整合。TPS2HC120EVM 的設計可作為獨立電路板使用，並具有附加電壓供應和輸出負載。如過電流、接地短路、負載開路和電池短路偵測等功能均已啟用，以供在評估模組上使用。
使用指南: PDF | HTML
TI.com 無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HVSSOP (DGQ) 28 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片