首頁 電源管理 AC/DC 和 DC/DC 控制器 (外部 FET)

具 EcoMode 的 4.5V 至 28V 輸入同步降壓控制器

TPS53219 不建議用於新設計
此產品將繼續向現有客戶提供。新設計應考量替代產品。
open-in-new 比較替代產品
功能與所比較的裝置相似
TPS56837 現行 4.5-V 至 28-V 輸入、8-A 同步降壓轉換器 Higher power density integrated FET converter solution for up to 8A output current

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 20 Vin (max) (V) 28 Vin (min) (V) 4.5 Vout (max) (V) 5.5 Vout (min) (V) 0.6 Control mode D-CAP Features Enable, Light-load efficiency, Power good, Prebias startup, Synchronous rectification Operating temperature range (°C) -40 to 85 Iq (typ) (µA) 400 Duty cycle (max) (%) 90 Number of phases 1
Rating Catalog Topology Buck Iout (max) (A) 20 Vin (max) (V) 28 Vin (min) (V) 4.5 Vout (max) (V) 5.5 Vout (min) (V) 0.6 Control mode D-CAP Features Enable, Light-load efficiency, Power good, Prebias startup, Synchronous rectification Operating temperature range (°C) -40 to 85 Iq (typ) (µA) 400 Duty cycle (max) (%) 90 Number of phases 1
VQFN (RGT) 16 9 mm² 3 x 3
  • Wide Input Voltage Range: 4.5 V to 28 V
  • Output Voltage Range: 0.6 V to 5.5 V
  • Wide Output Load Range: 0 A to > 20 A
  • Built-In 0.6-V Reference
  • Built-In LDO Linear Voltage Regulator
  • Auto-Skip Eco-mode™ for Light Load Efficiency
  • D-CAP™ Mode with 100-ns Load-Step Response
  • Adaptive On-Time Control Architecture with 8 Selectable Frequency Settings
  • 4700ppm/°C RDS(on)Current Sensing
  • 0.7-ms, 1.4-ms, 2.8-ms and 5.6-ms Selectable Internal Voltage Servo Soft-Start
  • Pre-Charged Start-up Capability
  • Built-In Output Discharge
  • Power Good Output
  • Integrated Boost Switch
  • Built-in OVP/UVP/OCP
  • Thermal Shutdown (Non-latch)
  • 3 mm × 3mm QFN, 16-Pin (RGT) Package
  • APPLICATIONS
    • Point-of-Load Systems
      • Storage Computer
      • Server Computer
      • Multi-Function Printer
      • Embedded Computing

D-CAP™ and Eco-mode™ are trademarks of Texas Instruments.

  • Wide Input Voltage Range: 4.5 V to 28 V
  • Output Voltage Range: 0.6 V to 5.5 V
  • Wide Output Load Range: 0 A to > 20 A
  • Built-In 0.6-V Reference
  • Built-In LDO Linear Voltage Regulator
  • Auto-Skip Eco-mode™ for Light Load Efficiency
  • D-CAP™ Mode with 100-ns Load-Step Response
  • Adaptive On-Time Control Architecture with 8 Selectable Frequency Settings
  • 4700ppm/°C RDS(on)Current Sensing
  • 0.7-ms, 1.4-ms, 2.8-ms and 5.6-ms Selectable Internal Voltage Servo Soft-Start
  • Pre-Charged Start-up Capability
  • Built-In Output Discharge
  • Power Good Output
  • Integrated Boost Switch
  • Built-in OVP/UVP/OCP
  • Thermal Shutdown (Non-latch)
  • 3 mm × 3mm QFN, 16-Pin (RGT) Package
  • APPLICATIONS
    • Point-of-Load Systems
      • Storage Computer
      • Server Computer
      • Multi-Function Printer
      • Embedded Computing

D-CAP™ and Eco-mode™ are trademarks of Texas Instruments.

The TPS53219 is small-sized single buck controller with adaptive on-time D-CAP™ mode control. The device is suitable for low output voltage, high current, PC system power rail and similar point-of-load (POL) power supplies in digital consumer products. The small package and minimal pin-count save space on the PCB, while the dedicated EN pin and pre-set frequency selections simplify the power supply design. The skip-mode at light load conditions, strong gate drivers and low-side FET RDS(on) current sensing supports low-loss and high efficiency, over a broad load range. The conversion input voltage (high-side FET drain voltage) range is between 3 V and 28 V, and the output voltage range is between 0.6 V and 5.5 V. The TPS53219 is available in a 16-pin, QFN package specified from –40°C to 85°C.

The TPS53219 is small-sized single buck controller with adaptive on-time D-CAP™ mode control. The device is suitable for low output voltage, high current, PC system power rail and similar point-of-load (POL) power supplies in digital consumer products. The small package and minimal pin-count save space on the PCB, while the dedicated EN pin and pre-set frequency selections simplify the power supply design. The skip-mode at light load conditions, strong gate drivers and low-side FET RDS(on) current sensing supports low-loss and high efficiency, over a broad load range. The conversion input voltage (high-side FET drain voltage) range is between 3 V and 28 V, and the output voltage range is between 0.6 V and 5.5 V. The TPS53219 is available in a 16-pin, QFN package specified from –40°C to 85°C.

下載

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet Wide Input Voltage, Eco-mode™, Single Synchronous Step-Down Controller datasheet 2010年 8月 16日

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點