TPS62868

現行

採用 1.5-mm x 2.5-mm QFN 封裝且具 I²C 介面的 5.5-V 4-A 同步降壓轉換器

產品詳細資料

Rating Catalog Topology Buck, Step-Down Converter, Synchronous Buck Iout (max) (A) 4 Vin (max) (V) 5.5 Vin (min) (V) 2.4 Vout (max) (V) 3.35 Vout (min) (V) 0.2 Features Adaptive/Dynamic Voltage Scaling, Enable, Forced PWM, I2C/PMBus, Light load efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Synchronous Rectification, UVLO fixed, VID Interface EMI features Low parasitic Hotrod packaging Control mode COT, Constant on-time (COT), DCS-Control Switching frequency (min) (kHz) 2400 Switching frequency (max) (kHz) 2400 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 4 Duty cycle (max) (%) 100 Type Converter, Converter (Integrated Switch), DC/DC converter
Rating Catalog Topology Buck, Step-Down Converter, Synchronous Buck Iout (max) (A) 4 Vin (max) (V) 5.5 Vin (min) (V) 2.4 Vout (max) (V) 3.35 Vout (min) (V) 0.2 Features Adaptive/Dynamic Voltage Scaling, Enable, Forced PWM, I2C/PMBus, Light load efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Synchronous Rectification, UVLO fixed, VID Interface EMI features Low parasitic Hotrod packaging Control mode COT, Constant on-time (COT), DCS-Control Switching frequency (min) (kHz) 2400 Switching frequency (max) (kHz) 2400 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 4 Duty cycle (max) (%) 100 Type Converter, Converter (Integrated Switch), DC/DC converter
VQFN-HR (RQY) 9 3.75 mm² 2.5 x 1.5
  • 11-mΩ and 10.5-mΩ internal power MOSFETs
  • >90% efficiency (0.9-V output)
  • DCS-Control topology for fast transient response
  • Available output voltage ranges for dynamic voltage scaling (DVS) through I2C
    • Output voltage range from 0.2-V to 0.8375-V with 2.5-mV step size
    • Output voltage range from 0.4-V to 1.675-V with 5-mV step size
    • Output voltage range from 0.8-V to 3.35-V with 10-mV step size
  • 1% output voltage accuracy
  • 2.4-MHz switching frequency
  • Selection by external resistor
    • Start-up output voltage
    • I2C target address
  • Selection by I2C interface
    • Power save mode or forced PWM mode
    • Output discharge
    • Hiccup or latching short-circuit protection
    • Output voltage ramp speed
  • Thermal pre-warning and thermal shutdown
  • Power good indicator pin option with window comparator
  • I2C-compatible interface up to 3.4 Mbps
  • Available in 1.5-mm x 2.5-mm x 1.0-mm 9-pin QFN package with 0.5-mm pitch
  • Also available in WCSP package: TPS62866, 6-A synchronous step-down converter with I2C interface in 1.05-mm x 1.78-mm WCSP package
  • Create a custom design using with TPS62868/9 with the WEBENCH Power Designer
  • 11-mΩ and 10.5-mΩ internal power MOSFETs
  • >90% efficiency (0.9-V output)
  • DCS-Control topology for fast transient response
  • Available output voltage ranges for dynamic voltage scaling (DVS) through I2C
    • Output voltage range from 0.2-V to 0.8375-V with 2.5-mV step size
    • Output voltage range from 0.4-V to 1.675-V with 5-mV step size
    • Output voltage range from 0.8-V to 3.35-V with 10-mV step size
  • 1% output voltage accuracy
  • 2.4-MHz switching frequency
  • Selection by external resistor
    • Start-up output voltage
    • I2C target address
  • Selection by I2C interface
    • Power save mode or forced PWM mode
    • Output discharge
    • Hiccup or latching short-circuit protection
    • Output voltage ramp speed
  • Thermal pre-warning and thermal shutdown
  • Power good indicator pin option with window comparator
  • I2C-compatible interface up to 3.4 Mbps
  • Available in 1.5-mm x 2.5-mm x 1.0-mm 9-pin QFN package with 0.5-mm pitch
  • Also available in WCSP package: TPS62866, 6-A synchronous step-down converter with I2C interface in 1.05-mm x 1.78-mm WCSP package
  • Create a custom design using with TPS62868/9 with the WEBENCH Power Designer

The TPS62868 and TPS62869 devices are high-frequency synchronous step-down converters with I2C interface which provide an efficient, adaptive, and high power-density solution. At medium to heavy loads, the converter operates in PWM mode and automatically enters Power Save Mode operation at light load to maintain high efficiency over the entire load current range. The device can also be forced in PWM mode operation for smallest output voltage ripple. Together with its DCS-Control architecture, excellent load transient performance and tight output voltage accuracy are achieved. Through the I2C interface and a dedicated VID pin, the output voltage is quickly adjusted to adapt the power consumption of the load to the ever-changing performance needs of the application.

The TPS62868 and TPS62869 devices are high-frequency synchronous step-down converters with I2C interface which provide an efficient, adaptive, and high power-density solution. At medium to heavy loads, the converter operates in PWM mode and automatically enters Power Save Mode operation at light load to maintain high efficiency over the entire load current range. The device can also be forced in PWM mode operation for smallest output voltage ripple. Together with its DCS-Control architecture, excellent load transient performance and tight output voltage accuracy are achieved. Through the I2C interface and a dedicated VID pin, the output voltage is quickly adjusted to adapt the power consumption of the load to the ever-changing performance needs of the application.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
TPS62869 現行 採用 1.5-mm x 2.5-mm QFN 封裝且具 I²C 介面的 5.5-V 6-A 同步降壓轉換器 Higher output current alternative.
功能與所比較的裝置相似
TPS62864 現行 採用 1.05 mm × 1.78 mm WCSP 封裝且具有 I2C 介面的 4A 同步降壓轉換器 Smaller 4-A converter in CSP package.
TPSM82864A 現行 採用 3.5-mm x 4-mm QFN 封裝,且具有整合式電感器的 2.4-V 至 5.5-V 輸入、4-A 薄型降壓電源模組 DC/DC module alternative in overmolded QFN.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 6
類型 標題 日期
* Data sheet TPS62868x 2.4-V to 5.5-V Input, 4-A/6-A Synchronous Step-Down Converter with I2C Interface in QFN Package datasheet (Rev. B) PDF | HTML 2021年 7月 12日
Application note Closed Loop Constant Power Drive to Simplify Heater Element Control and Extend Battery Life PDF | HTML 2025年 1月 29日
Application note Benefiting from Step-Down Converters with an I2C Communication Interface (Rev. B) PDF | HTML 2023年 11月 29日
Application note Intro to Multi-Function Pins and Their Applications in TI Step-Down Converters (Rev. A) PDF | HTML 2022年 11月 17日
Application note Understanding SOA Curves to Operate at High Output Currents and Temperature PDF | HTML 2022年 5月 5日
White paper Enabling Higher Data Rates for Optical Modules With Small and Efficient Power 2021年 3月 22日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS62869EVM-118 — 具 I2C 介面的高功率密度 6-A 降壓轉換器評估模組

TPS62869EVM-x (BSR118) 評估模組 (EVM) 可幫助評估採用 1.5 mm x 2.5 mm QFN 小型封裝解決方案且配備 DCS-Control 的 TPS62869 系列 6-A 降壓轉換器。EVM 可建立 0.4 V 至 1.675 V 之間的輸出電壓,並可從介於 2.4 V 和 5.5 V 之間的較高輸入電壓取得 1% 準確度輸出電壓,並在兩個電路中實作預設的 0.9-V 輸出電壓設定。  TPS62869 系列是一款高效率且精巧的解決方案,適合有限空間應用的負載點 (POL) 轉換器,如人工智慧晶片、攝影機模組、固態硬碟 (SSD) 及光學模組。
使用指南: PDF | HTML
模擬型號

TPS62868 PSpice Transient Model (for TPS6286800C)

SLUM936.ZIP (327 KB) - PSpice Model
模擬型號

TPS62868 PSpice Transient Model (for TPS628680A)

SLUM933.ZIP (303 KB) - PSpice Model
模擬型號

TPS62868 PSpice Transient Model (for TPS6286810C)

SLUM937.ZIP (326 KB) - PSpice Model
模擬型號

TPS62868 PSpice Transient Model (for TPS628681A)

SLUM934.ZIP (300 KB) - PSpice Model
模擬型號

TPS62868 PSpice Transient Model (for TPS6286820C)

SLUM938.ZIP (326 KB) - PSpice Model
模擬型號

TPS62868 PSpice Transient Model (for TPS628682A)

SLUM935.ZIP (302 KB) - PSpice Model
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN-HR (RQY) 9 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片