首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器

TPS65235

現行

產品詳細資料

Rating Catalog Topology Boost Vin (max) (V) 20 Vin (min) (V) 4.5 Vout (max) (V) 20 Vout (min) (V) 11 Switch current limit (typ) (A) 3 Features Adjustable current limit, I2C, Nonsynchronous, Power good Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00012 Duty cycle (max) (%) 78
Rating Catalog Topology Boost Vin (max) (V) 20 Vin (min) (V) 4.5 Vout (max) (V) 20 Vout (min) (V) 11 Switch current limit (typ) (A) 3 Features Adjustable current limit, I2C, Nonsynchronous, Power good Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00012 Duty cycle (max) (%) 78
WQFN (RUK) 20 9 mm² (3 mm × 3 mm)
  • Complete integrated solution for LNB and I2C interface
  • DiSEqC 2.x and DiSEqC 1.x compatible
  • Supports 5-V, 12-V, and 15-V power rail
  • Up to 1000-mA accurate output current limit adjustable by external resistor
  • Boost switch peak current limit proportional to LDO current limit
  • Boost converter with 140-mΩ low Rds(on) internal power switch
  • Boost switching frequency 1-MHz or 500-kHz selectable
  • Dedicated enable pin for non-I2C application
  • Low drop output LDO with push-pull output stage for VLNB output
  • Built-in accurate 22-kHz tone generator and external tone input support
  • Supports both external 44-kHz and 22-kHz tone input
  • Adjustable soft-start and 13-V to 18-V voltage transition time
  • 650 mV to 750-mV, 22-kHz tone amplitude selection
  • I2C registers accessible with EN low
  • Short circuit dynamic protection
  • Diagnostics for output voltage level, DiSEqC tone input and output, current level, and cable connection
  • Thermal protection available
  • 20-lead WQFN 3-mm × 3-mm (RUK) package
  • Complete integrated solution for LNB and I2C interface
  • DiSEqC 2.x and DiSEqC 1.x compatible
  • Supports 5-V, 12-V, and 15-V power rail
  • Up to 1000-mA accurate output current limit adjustable by external resistor
  • Boost switch peak current limit proportional to LDO current limit
  • Boost converter with 140-mΩ low Rds(on) internal power switch
  • Boost switching frequency 1-MHz or 500-kHz selectable
  • Dedicated enable pin for non-I2C application
  • Low drop output LDO with push-pull output stage for VLNB output
  • Built-in accurate 22-kHz tone generator and external tone input support
  • Supports both external 44-kHz and 22-kHz tone input
  • Adjustable soft-start and 13-V to 18-V voltage transition time
  • 650 mV to 750-mV, 22-kHz tone amplitude selection
  • I2C registers accessible with EN low
  • Short circuit dynamic protection
  • Diagnostics for output voltage level, DiSEqC tone input and output, current level, and cable connection
  • Thermal protection available
  • 20-lead WQFN 3-mm × 3-mm (RUK) package

Designed for analog and digital satellite receivers, the TPS65235 is a monolithic voltage regulator with I2C interface; specifically to provide the 13-V to 18-V power supply and the 22-kHz tone signal to the LNB down converter in the antenna dish or to the multi-switch box. It offers a complete solution with minimum component count, low power dissipation together with simple design and I2C standard interface.

TPS65235 features high power efficiency. The boost converter integrates a 140-mΩ power MOSFET running at 1 MHz or 500 kHz selectable switching frequency. Drop out voltage at the linear regulator is 0.8 V to minimize power loss. TPS65235 provides multiple ways to generate the 22 kHz signal. Integrated linear regulator with push-pull output stage generates 22-kHz tone signal superimposed at the output even at zero loading. Current limit of linear regulator can be programmed by external resistor with ±10% accuracy. Full range of diagnostic read by I2C is available for system monitoring.

TPS65235 supports advanced DiSEqC 2.x standard with 22-kHz tone detection circuit and output interface.

Designed for analog and digital satellite receivers, the TPS65235 is a monolithic voltage regulator with I2C interface; specifically to provide the 13-V to 18-V power supply and the 22-kHz tone signal to the LNB down converter in the antenna dish or to the multi-switch box. It offers a complete solution with minimum component count, low power dissipation together with simple design and I2C standard interface.

TPS65235 features high power efficiency. The boost converter integrates a 140-mΩ power MOSFET running at 1 MHz or 500 kHz selectable switching frequency. Drop out voltage at the linear regulator is 0.8 V to minimize power loss. TPS65235 provides multiple ways to generate the 22 kHz signal. Integrated linear regulator with push-pull output stage generates 22-kHz tone signal superimposed at the output even at zero loading. Current limit of linear regulator can be programmed by external resistor with ±10% accuracy. Full range of diagnostic read by I2C is available for system monitoring.

TPS65235 supports advanced DiSEqC 2.x standard with 22-kHz tone detection circuit and output interface.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
TPS65235-1 現行 採用 FCCM 模式且具有 I2C 介面的 LNB 電壓穩壓器 Same functionality, pin-to-pin but with a few different features

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 5
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS65235 LNB Voltage Regulator With I2C Interface datasheet (Rev. D) PDF | HTML 2021/5/26
應用說明 DiSEqC™ 2.x Filter Optimization PDF | HTML 2021/5/11
應用說明 LNB design considerations on TPS65233, TPS65235 PDF | HTML 2017/9/25
應用說明 DiSEqC™ Protocol and LNB Voltage Regulator TPS65235 for Satellite STB/TV 2016/12/14
使用指南 Evaluation Module for the TPS65235 LNB Voltage Regulator With I2C Interface 2015/11/26

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS65235EVM-694 — 適用於 DisEqC2.x,具有 I2C 介面的 TPS65235 LNB 電壓穩壓器評估模組

TPS65235EVM-694 評估模組 (EVM) 是完全組裝且經過測試的電路,用於評估適用於 DisEqC2.x 應用的 TPS65235。此 EVM 包含輸入和輸出連接器以及控制跨接器,可輕鬆評估裝置功能。與 TPS65235EVM-747 相比,TPS65235EVM-694 具有 DisEqC 2.x 支援的電路。TPS65235 是一款具有 I2C 介面的單體電壓穩壓器,專門用於向碟形天線中的 LNB 降轉換器或多開關盒提供 13V/18V 電源和 22kHz 音調訊號。
使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

TPS65235EVM-747 — 適用於 DisEqC1.x,具有 I2C 介面的 TPS65235 LNB 電壓穩壓器評估模組

TPS65235EVM-PWR747 評估模組 (EVM) 是完全組裝且經過測試的電路,用於評估適用於 DisEqC1.x 應用的 TPS65235。此 EVM 包含輸入和輸出連接器以及控制跨接器,可輕鬆評估裝置功能。TPS65235 是一款具有 I2C 介面的單體電壓穩壓器,專門用於向碟形天線中的 LNB 降轉換器或多開關盒提供 13V/18V 電源和 22kHz 音調訊號。

支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發模組 (EVM) 的 GUI

SLVC651 — TPS65235EVM GUI

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (RUK) 20 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片