現在提供此產品的更新版本
引腳對引腳且具備與所比較裝置相同的功能
TPS7B82-Q1
- AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C ≤ TA ≤ 125°C
- Temperature grade 0: –40°C ≤ TA ≤ 150°C
- Extended junction temperature range:
- Grade 1: –40°C ≤ TJ ≤ 150°C
- Grade 0: –40°C ≤ TJ ≤ 165°C
- Low quiescent current IQ:
- 300nA shutdown IQ
- 2.7µA typical at light loads
- 5µA maximum at light loads
- 3V to 40V wide VIN input voltage range with up to 45V transient
- Maximum output current: 300mA
- 2% output-voltage accuracy
- Maximum dropout voltage: 700mV at 200mA load current for fixed 5V output version
- Stable with low-ESR (0.001Ω to 5Ω) ceramic output-stability capacitor (1µF to 200µF)
- Fixed 2.5V, 3.3V, and 5V output voltage
- Packages:
- 8-pin HVSSOP, RθJA = 63.9°C/W
- 6-pin WSON, RθJA = 72.8°C/W
- 6-pin WSON wettable flank, RθJA = 72.8°C/W
- 5-pin TO-252, RθJA = 31.1°C/W
- 14-pin HTSSOP, RθJA = 52.0°C/W
In automotive battery-connected applications, low quiescent current (IQ) is important to save power and extend battery lifetime. Ultra-low IQ must be included for always-on systems.
The TPS7B82-Q1 is a low-dropout linear regulator designed to operate with a wide input-voltage range from 3V to 40V (45V load dump protection). Operation down to 3V allows the TPS7B82-Q1 to continue operating during cold-crank and start and stop conditions. With only 2.7µA typical quiescent current at light load, this device is an optimum design for powering microcontrollers (MCUs) and CAN/LIN transceivers in standby systems.
The device features integrated short-circuit and overcurrent protection. This device operates in ambient temperatures from –40°C to +125°C and with junction temperatures from –40°C to +150°C. Additionally, this device uses a thermally conductive package to enable sustained operation despite significant dissipation across the device. Because of these features, the device is designed as a power supply for various automotive applications.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TPS7B82-Q1 Automotive 300-mA, High-Voltage, Ultra-Low-IQ Low-Dropout Regulator datasheet (Rev. K) | PDF | HTML | 2025年 9月 25日 |
| Application note | An empirical analysis of the impact of board layout on LDO thermal performance (Rev. A) | PDF | HTML | 2025年 9月 23日 | |
| Functional safety information | TPS7B82-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA (Rev. A) | PDF | HTML | 2020年 12月 31日 | |
| Application note | A Topical Index of TI LDO Application Notes (Rev. F) | 2019年 6月 27日 | ||
| E-book | LDO Basics (Rev. A) | 2019年 4月 8日 | ||
| Technical article | LDO basics: dropout | PDF | HTML | 2017年 3月 16日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS7B8250EVM — TPS7B8250 300-mA 高電壓超低 IQ LDO 穩壓器評估模組
TPS7B8250EVM 評估模組 (EVM) 可讓您評估 TPS7B82-Q1 裝置的運作及性能。TPS7B82-Q1 裝置是一款低壓差 (LDO) 線性穩壓器，專為高達 40V VIN 和 300mA（最大）輸出電流所設計。本裝置在低負載下僅有 2.7μA 的一般靜態電流，因此適用於汽車應用方面的待機系統。
TPS7B82EVM-024 — TPS7B82-Q1 300-mA 高電壓超低 IQ LDO 線性穩壓器評估模組
TPS7B82EVM-024 評估模組 (EVM) 爲典型配置設計，用於評估 TPS7B82-Q1 的運作和性能，其為車用 300mA 高電壓超低 IQ 低壓降 (LDO) 線性穩壓器。
TPS7B82EVM-024 主要配置爲參考設計，可供需要高達 300mA 動態負載電流的工程應用。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| HTSSOP (PWP) | 14 | Ultra Librarian |
| HVSSOP (DGN) | 8 | Ultra Librarian |
| TO-252 (KVU) | 5 | Ultra Librarian |
| WSON (DRV) | 6 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。