SLASFH8 March   2026 MSPM33C321A-Q1

ADVANCE INFORMATION  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Functional Block Diagram
  6. 5 Device Comparison
  7. 6 Pin Configuration and Functions
    1. 6.1 Pin Diagrams
    2. 6.2 Pin Attributes
      1.      10
    3. 6.3 Signal Descriptions
      1.      12
      2.      13
      3.      14
      4.      15
      5.      16
      6.      17
      7.      18
      8.      19
      9.      20
      10.      21
      11.      22
      12.      23
      13.      24
      14.      25
      15.      26
      16.      27
    4. 6.4 Connections for Unused Pins
  8. 7 Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings
    3. 7.3  Recommended Operating Conditions
    4. 7.4  Thermal Information
    5. 7.5  Supply Current Characteristics
      1. 7.5.1 RUN/SLEEP Modes
      2. 7.5.2 STOP/STANDBY Modes
      3. 7.5.3 SHUTDOWN Mode
      4. 7.5.4 VBAT current consumption
    6. 7.6  Flash Memory Characteristics
    7. 7.7  Power Supply Sequencing
      1. 7.7.1 Power Supply Ramp
      2. 7.7.2 POR and BOR
      3. 7.7.3 VBat Characteristics
      4. 7.7.4 Timing Characteristics
    8. 7.8  Clock Specifications
      1. 7.8.1 System Oscillator (SYSOSC)
      2. 7.8.2 High Frequency Crystal/Clock
      3. 7.8.3 System Phase Lock Loop (SYSPLL)
      4. 7.8.4 Low Frequency Oscillator (LFOSC)
      5. 7.8.5 Low Frequency Crystal/Clock
    9. 7.9  Analog Specifications
      1. 7.9.1 ADC Specifications
        1. 7.9.1.1 ADC Electrical Characteristics
        2. 7.9.1.2 ADC Switching Characteristics
        3. 7.9.1.3 ADC Linearity Parameters
        4. 7.9.1.4 Typical Connection Diagram
      2. 7.9.2 COMP Specifications
        1. 7.9.2.1 Comparator Electrical Characteristics
        2. 7.9.2.2 COMP DAC Electrical Characteristics
      3. 7.9.3 VREF Specifications
        1. 7.9.3.1 VREF Voltage Characteristics
        2. 7.9.3.2 VREF Electrical Characteristics
      4. 7.9.4 Analog VBOOST Specification
        1. 7.9.4.1 Analog Mux VBOOST
      5. 7.9.5 Temperature Sensor
    10. 7.10 Serial Interface Specifications
      1. 7.10.1 UART
        1. 7.10.1.1 UART
      2. 7.10.2 I2C
        1. 7.10.2.1 I2C Characteristics
        2. 7.10.2.2 I2C Filter
        3. 7.10.2.3 I2C Timing Diagram
      3. 7.10.3 SPI
        1. 7.10.3.1 SPI
        2. 7.10.3.2 SPI Timing Diagram
      4. 7.10.4 CAN
        1. 7.10.4.1 CAN
      5. 7.10.5 QSPI
        1. 7.10.5.1 QSPI
        2. 7.10.5.2 QSPI Timing Diagram
      6. 7.10.6 I2S/TDM
        1. 7.10.6.1 Serial Audio
        2. 7.10.6.2 I2S/TDM Timing Diagram
    11. 7.11 Digital IO
    12. 7.12 TRNG
      1. 7.12.1 TRNG Electrical Characteristics
      2. 7.12.2 TRNG Switching Characteristics
    13. 7.13 Emulation and Debug
      1. 7.13.1 SWD Timing
  9. 8 Detailed Description
    1. 8.1  Arm Cortex-M33 core with TrustZone and FPU
    2. 8.2  Power Management and Clock Unit (PMCU)
      1. 8.2.1 Power Management Unit (PMU)
      2. 8.2.2 Clock Module (CKM)
      3. 8.2.3 Operating Modes
        1. 8.2.3.1 Functionality by Operating Mode
    3. 8.3  Device Memory Map
      1. 8.3.1 Memory Organization
      2. 8.3.2 Peripheral Memory Map
    4. 8.4  NVIC Interrupt Map
    5. 8.5  Embedded Flash Memory
    6. 8.6  Embedded SRAM
    7. 8.7  DMA
    8. 8.8  Event Manager
    9. 8.9  Error Aggregator Module (EAM)
    10. 8.10 GPIO
    11. 8.11 IOMUX
      1. 8.11.1 Input/Output Diagrams
    12. 8.12 Analog Modules
      1. 8.12.1 HSADC
      2. 8.12.2 COMP
      3. 8.12.3 Temperature Sensor
      4. 8.12.4 VREF
      5. 8.12.5 Device Analog Connections
    13. 8.13 Security and Cryptography
      1. 8.13.1 Global Security Controller (GSC)
      2. 8.13.2 AESADV
      3. 8.13.3 SHA256
      4. 8.13.4 Public Key Algorithm (PKA)
      5. 8.13.5 TRNG
      6. 8.13.6 Keystore
      7. 8.13.7 CRC
    14. 8.14 Serial Communication Interfaces
      1. 8.14.1 UNICOMM (UART/I2C/SPI)
        1. 8.14.1.1 UART (UNICOMM)
        2. 8.14.1.2 I2C (UNICOMM)
        3. 8.14.1.3 SPI (UNICOMM)
      2. 8.14.2 CAN-FD
      3. 8.14.3 Quad SPI (QSPI)
      4. 8.14.4 Digital Audio Interface - I2S/TDM
    15. 8.15 LFSS
    16. 8.16 Timers, RTC and Watchdogs
      1. 8.16.1 Timers (TIMx)
      2. 8.16.2 RTC_A
      3. 8.16.3 IWDT
      4. 8.16.4 WWDT
    17. 8.17 Serial Wire Debug Interface
    18. 8.18 Bootstrap Loader (BSL)
    19. 8.19 Device Factory Constants
    20. 8.20 Identification
  10. 9 Applications, Implementation, and Layout
    1. 9.1 Typical Application
      1. 9.1.1 Schematic
  11. 10Device and Documentation Support
    1. 10.1 Getting Started and Next Steps
    2. 10.2 Device Nomenclature
    3. 10.3 Tools and Software
    4. 10.4 Documentation Support
    5. 10.5 Support Resources
    6. 10.6 Trademarks
    7. 10.7 Electrostatic Discharge Caution
    8. 10.8 Glossary
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information

8.8 Event Manager

The event manager transfers digital events from one entity (for example, a peripheral) to another (for example, a second peripheral, the DMA, or the CPU). The event manager implements event transfer through a defined set of event publishers (generators) and subscribers (receivers) which are interconnected through an event fabric containing a combination of static and programmable routes.

Events that are transferred by the event manager include:

  • Peripheral event transferred to the CPU as an interrupt request (IRQ) (Static Event)
    • Example: RTC interrupt is sent to the CPU
  • Peripheral event transferred to the DMA as a DMA trigger (DMA Event)
    • Example: UART data receive trigger to DMA to request a DMA transfer
  • Peripheral event transferred to another peripheral to directly trigger an action in hardware (Generic Event)
    • Example: TIMx timer peripheral publishes a periodic event to the ADC subscriber port, and the ADC uses the event to trigger start-of-sampling

Refer to the Event chapter of the MSPM33C3x 160-MHz Microcontrollers Technical Reference Manual.

Table 8-7 Generic Event Channels A generic route is either a point-to-point (1:1) route or a point-to-two (1:2) splitter route in which the peripheral publishing the event is configured to use one of several available generic route channels to publish its event to another entity (or entities, in the case of a splitter route), where an entity may be another peripheral, a generic DMA trigger event, or a generic CPU event.
CHANIDGeneric Route Channel SelectionChannel Type
0No generic event channel selectedN/A
1Generic event channel 1 selected1 : 1
2Generic event channel 2 selected1 : 1
3Generic event channel 3 selected1 : 1
4Generic event channel 4 selected1 : 1
5Generic event channel 5 selected1 : 1
6Generic event channel 6 selected1 : 1
7Generic event channel 7 selected1 : 1
8Generic event channel 8 selected1 : 1
9Generic event channel 9 selected1 : 1
10Generic event channel 10 selected1 : 1
11Generic event channel 11 selected1 : 1
12Generic event channel 12 selected1 : 2 (splitter)
13Generic event channel 13 selected1 : 2 (splitter)
14Generic event channel 14 selected1 : 2 (splitter)
15Generic event channel 15 selected1 : 2 (splitter)