Product details

Haptic actuator type Piezo Input signal PWM, Analog Vs (Min) (V) 3 Vs (Max) (V) 5.5 Output voltage (Max) (V) 100 Vout (Max) (V p-p) 200 Iq (Typ) (mA) 5 Shutdown current (uA) 13 Startup time (ms) 1.5 Operating temperature range (C) -40 to 70
Haptic actuator type Piezo Input signal PWM, Analog Vs (Min) (V) 3 Vs (Max) (V) 5.5 Output voltage (Max) (V) 100 Vout (Max) (V p-p) 200 Iq (Typ) (mA) 5 Shutdown current (uA) 13 Startup time (ms) 1.5 Operating temperature range (C) -40 to 70
VQFN (RGP) 20 16 mm² 4 x 4
  • High-Voltage Piezo Haptic Driver
    • Drives up to 100 nF at 200 VPP and 300 Hz
    • Drives up to 150 nF at 150 VPP and 300 Hz
    • Drives up to 330 nF at 100 VPP and 300 Hz
    • Drives up to 680 nF at 50 VPP and 300 Hz
    • Differential Output
  • Integrated Boost Converter
    • Adjustable Boost Voltage
    • Adjustable Current Limit
    • Integrated Power FET and Diode
    • No Transformer Required
  • Fast Start Up Time of 1.5 ms
  • Wide Supply Voltage Range of 3.0 V to 5.5 V
  • 1.8V Compatible Digital Pins
  • Thermal Protection
  • Available in a 4 mm × 4 mm × 0.9 mm QFN package (RGP)
  • High-Voltage Piezo Haptic Driver
    • Drives up to 100 nF at 200 VPP and 300 Hz
    • Drives up to 150 nF at 150 VPP and 300 Hz
    • Drives up to 330 nF at 100 VPP and 300 Hz
    • Drives up to 680 nF at 50 VPP and 300 Hz
    • Differential Output
  • Integrated Boost Converter
    • Adjustable Boost Voltage
    • Adjustable Current Limit
    • Integrated Power FET and Diode
    • No Transformer Required
  • Fast Start Up Time of 1.5 ms
  • Wide Supply Voltage Range of 3.0 V to 5.5 V
  • 1.8V Compatible Digital Pins
  • Thermal Protection
  • Available in a 4 mm × 4 mm × 0.9 mm QFN package (RGP)

The DRV8662 is a single-chip piezo haptic driver with integrated 105 V boost switch, integrated power diode, and integrated fully-differential amplifier. This versatile device is capable of driving both high-voltage and low-voltage piezo haptic actuators. The input signal can be either differential or single-ended. The DRV8662 supports four GPIO-controlled gains: 28.8 dB, 34.8 dB, 38.4 dB, and 40.7 dB.

The boost voltage is set using two external resistors, and the boost current limit is programmable via the REXT resistor. The boost converter architecture will not allow the demand on the supply current to exceed the limit set by the REXT resistor; therefore, the DRV8662 is well-suited for portable applications. This feature also allows the user to optimize the DRV8662 circuit for a given inductor based on the desired performance requirements.

A typical start-up time of 1.5 ms makes the DRV8662 an ideal piezo driver for fast haptic responses. Thermal overload protection prevents the device from being damaged when over driven.

The DRV8662 is a single-chip piezo haptic driver with integrated 105 V boost switch, integrated power diode, and integrated fully-differential amplifier. This versatile device is capable of driving both high-voltage and low-voltage piezo haptic actuators. The input signal can be either differential or single-ended. The DRV8662 supports four GPIO-controlled gains: 28.8 dB, 34.8 dB, 38.4 dB, and 40.7 dB.

The boost voltage is set using two external resistors, and the boost current limit is programmable via the REXT resistor. The boost converter architecture will not allow the demand on the supply current to exceed the limit set by the REXT resistor; therefore, the DRV8662 is well-suited for portable applications. This feature also allows the user to optimize the DRV8662 circuit for a given inductor based on the desired performance requirements.

A typical start-up time of 1.5 ms makes the DRV8662 an ideal piezo driver for fast haptic responses. Thermal overload protection prevents the device from being damaged when over driven.

Download

Similar products you might be interested in

Similar functionality to the compared device.
LM48560 ACTIVE Mono, analog input, ceramic speaker driver with I2C control and integrated 30-V Class-H boost This product is a <30Vpp piezo & ceramic speaker driver

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 9
Type Title Date
* Data sheet Piezo-Haptic Driver with Integrated Boost Converter. datasheet (Rev. B) 01 Jul 2014
User guide DRV8662 Piezo Haptics Driver Evaluation Module (RevD Silicon) (Rev. B) 09 Mar 2016
Application note DRV8662, DRV2665, and DRV2667 Configuration Guide 05 Sep 2014
More literature Automotive Haptics Solutions 16 Sep 2013
Technical article Live from CES 2013 - HD haptic mobile devices 10 Jan 2013
Application note High-definition haptics: Feel the difference! 17 Jul 2012
Technical article CES 2012 Preview: Haptics and Touch Screen Controllers 31 Dec 2011
Technical article TI grabs 14 spots on EDN Hot 100 Products of 2011 list. 16 Nov 2011
Technical article TI claims 14 of EDN's Hot 100 Products of 2011 15 Nov 2011

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

DRV8662EVM — DRV8662 Evaluation Module

The DRV8662EVM Evaluation Module (EVM) is a fully-differential, high-voltage piezo actuator driver that provides quick response time for single layer and multi-layer piezo actuators. The DRV8662 drives piezo loads up to 200V differentially using an adjustable integrated boost converter. The (...)
In stock
Limit: 1
Simulation model

DRV8662 TINA-TI Spice Model

SLOM224.ZIP (21 KB) - TINA-TI Spice Model
Calculation tool

DRV8662-2665-2667_DESIGN_TOOL — DRV8662/DRV2665/DRV2667 Design Equation Tool

The DRV8662/DRV2665/DRV2667 Design Equation document assists the user in the design phase by calculating the driver hardware configuration based off of user-defined input parameters. The DRV8662/2665/2667 is a piezo haptic driver with integrated 105 V boost switch, integrated power diode, and (...)
Calculation tool

DRV8662, DRV2665, and DRV2667 Design Equations (Rev. A)

SLOR113A.ZIP (209 KB)
Package Pins Download
QFN (RGP) 20 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos