Top

Product details

Parameters

Number of channels (#) 1 Total supply voltage (Max) (+5V=5, +/-5V=10) 16 Total supply voltage (Min) (+5V=5, +/-5V=10) 2.7 Rail-to-rail In to V-, Out GBW (Typ) (MHz) 3 Slew rate (Typ) (V/us) 2.1 Vos (offset voltage @ 25 C) (Max) (mV) 5 Iq per channel (Typ) (mA) 0.55 Vn at 1 kHz (Typ) (nV/rtHz) 39 Rating Catalog Operating temperature range (C) -40 to 125, 0 to 70 Offset drift (Typ) (uV/C) 2 Features Input bias current (Max) (pA) 60 CMRR (Typ) (dB) 80 Output current (Typ) (mA) 7 Architecture CMOS open-in-new Find other General-purpose op amps

Package | Pins | Size

PDIP (P) 8 93 mm² 9.81 x 9.43 SOIC (D) 8 19 mm² 3.91 x 4.9 SOIC (D) 8 19 mm² 4.9 x 3.9 SOT-23 (DBV) 5 5 mm² 2.9 x 1.6 SOT-23 (DBV) 5 5 mm² 1.60 x 2.90 open-in-new Find other General-purpose op amps

Features

  • Rail-to-Rail Output
  • Wide Bandwidth: 3 MHz
  • High Slew Rate: 2.4 V/µs
  • Supply Voltage Range: 2.7 V to 16 V
  • Supply Current: 550 µA/Channel
  • Input Noise Voltage: 39 nV/√Hz
  • Input Bias Current: 1 pA
  • Specified Temperature Range:
    • Commercial Grade: 0°C to 70°C
    • Industrial Grade: –40°C to 125°C
  • Ultrasmall Packaging:
    • 5-Pin SOT-23 (TLV271)
    • 8-Pin MSOP (TLV272)
  • Ideal Upgrade for TLC72x Family
open-in-new Find other General-purpose op amps

Description

Operating from 2.7 V to 16 V over the extended industrial temperature range from –40°C to +125°C, the TLV27x is a low power, wide bandwidth operational amplifier (opamp) with rail to rail output. This makes it an ideal alternative to the TLC27x family for applications where rail-to-rail output swings are essential. The TLV27x provides 3-MHz bandwidth from only 550 µA.

Like the TLC27x, the TLV27x is fully specified for 5-V and ±5-V supplies. The maximum recommended supply voltage is 16 V, which allows the devices to be operated from a variety of rechargeable cells (±8 V supplies down to ±1.35 V).

The CMOS inputs enable use in high-impedance sensor interfaces, with the lower voltage operation making an attractive alternative for the TLC27x in battery-powered applications.

All members are available in PDIP and SOIC with the singles in the small SOT-23 package, duals in the MSOP, and quads in the TSSOP package.

The 2.7-V operation makes it compatible with Li-Ion powered systems and the operating supply voltage range of many micropower microcontrollers available today including TI’s MSP430.

open-in-new Find other General-purpose op amps
Download

Technical documentation

= Featured
No results found. Please clear your search and try again. View all 8
Type Title Date
* Datasheet TLV27x Family of 550-µA/Ch, 3-MHz, Rail-to-Rail Output Operational Amplifiers datasheet (Rev. E) Nov. 30, 2016
Technical articles What is an op amp? Jan. 21, 2020
Technical articles Designing tiny microphone circuits with the industry’s smallest op amp Apr. 12, 2018
Technical articles How to lay out a PCB for high-performance, low-side current-sensing designs Feb. 06, 2018
Technical articles Low-side current sensing for high-performance cost-sensitive applications Jan. 22, 2018
White papers The Signal e-book: A compendium of blog posts on op amp design topics Mar. 28, 2017
White papers Detection of Plunger Movement in DC Solenoids White Paper Jun. 12, 2015
Application notes TLV271, TLV272, TLV274 EMI Immunity Performance Dec. 19, 2012

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
$29.00
Description

The TI Precision Amplifier Quickstart Kit simplifies op amp selection, design, and evaluation with samples of six op amps and an evaluation module for prototyping surface-mount ICs. The kit is the perfect starting point for your amplifier designs.

You may also be interested in TI Precision Labs, the (...)

Features

The kit includes:

  • Six samples: Three low-power, low-voltage amplifiers and three low-power, wide-supply amplifiers. See the table below for the complete list.
  • DIP Adapter Evaluation Module (DIP-ADAPTER-EVM) for prototyping surface-mount ICs. The EVM supports the following package types: D or U (...)
EVALUATION BOARDS Download
document-generic User guide
Description

Speed up your op amp prototyping and testing with the DIP-Adapter-EVM, which provides a fast, easy and inexpensive way to interface with small, surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them directly to existing circuits.

The (...)

Features
  • Simplifies prototyping of SMT IC’s
  • Supports 6 common package types
  • Low Cost
EVALUATION BOARDS Download
document-generic User guide
Description
The DIYAMP-EVM is a unique evaluation module (EVM) family that provides engineers and do it yourselfers (DIYers) with real-world amplifier circuits, enabling you to quickly evaluate design concepts and verify simulations. It is available in three industry-standard packages (SC70, SOT23, SOIC) and 12 (...)
Features
  • 3 packages to choose from: SC70-5, SOT23-5 and SOIC-8
  • 12 circuit configurations to choose from: Noninverting, Inverting, Active Filters, Difference Amp, Comparator and more!
  • Dual and single supply configurations
  • PCB designed for High performance: Optimized for each function
  • Multiple interface options (...)
EVALUATION BOARDS Download
document-generic User guide
Description

The Universal OPAMPEVM is a series of general purpose blank circuit boards that simplify prototyping circuits for a variety of IC package types. The evaluation module board design allows many different circuits to be constructed easily and quickly. Five models are offered with each targeted for (...)

Design tools & simulation

SIMULATION MODELS Download
SBOC221B.TSC (105 KB) - TINA-TI Reference Design
SIMULATION MODELS Download
SBOM293A.ZIP (3 KB) - TINA-TI Spice Model
SIMULATION MODELS Download
SLOM249.ZIP (37 KB) - PSpice Model
SIMULATION TOOLS Download
SPICE-based analog simulation program
TINA-TI TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
document-generic User guide
CALCULATION TOOLS Download
Analog engineer's calculator
ANALOG-ENGINEER-CALC — The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
Features
  • Expedites circuit design with analog-to-digital converters (ADCs) and digital-to-analog converters (DACs)
    • Noise calculations
    • Common unit translation
  • Solves common amplifier circuit design problems
    • Gain selections using standard resistors
    • Filter configurations
    • Total noise for common amplifier configurations
  • (...)

Reference designs

REFERENCE DESIGNS Download
9.8~13.5-V input, 46-V 300-W output interleave boost reference design
PMP40679 — This reference design is a 300-W power output interleaving combination of two boost converters using LM5155 controller. Each converter outputs continuous 150-W and 200-W peak. A LMC555 circuit generates 150k-Hz square wave signal and its anti-phase signal for synchronous clock for the two LM5155 (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Inverting SEPIC reference design for noise sensitive loads
PMP30487 — This reference design is an inverting SEPIC (Cuk) Converter powering 50-W continuous and up to 70-W peak. The used Cuk topology provides continuous currents at input and output, which allows the lowest conducted emissions in both directions.  Compared to an inverting flyback radiated emissions (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Small Negative Bias Supply for Low Noise Applications Reference Design
PMP30373 — This circuit reference design is realized in Cuk Topology. The output voltage is -12V / -15V. The output current of 200mA is possible over an input voltage range of 10V to 60V  (even with a low input voltage of 6V 140mA output current is possible).  The perfect switching behavior of the (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Current Controlled Driver for 230V AC Solenoids Reference Design
TIDA-00284 TIDA-00284 proposes to integrate current control and plunger movement detection into an AC solenoid coil. This reference design provides a solution to control the solenoid current using a PWM-based controller along with a Hall sensor to detect plunger movement and switch from peak current to hold (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
125W Non-Isolated Inverting Buck Boost for Telecom -48V Applications Reference Design
PMP20371 — PMP20371 is a synchronous buck boost design utilizing the LM5122 for telecom applications. This design has a minimum operating input voltage of -35V and a maximum input voltage of -60V.  Switching frequency is set to 150kHz. The design is built on PMP20371 PCB, 4 layer board with 2oz copper on (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
LM5022 Cuk Converter Reference Design
PMP8639 — This converter delivers -36V with 1.5Amax out of an input voltage range of 32V to 40V. Another focus is loop compensation for Cuk topology.
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
3.3V -> 1.5V @ 500mA
PMP5670 — The PMP5670 -24.0V @ 300mA boost converter has an input voltage of -48V. It is designed to boost a negative input voltage to a lower negative output voltage.
REFERENCE DESIGNS Download
Current Controlled Driver for 24-V DC Solenoid with Plunger Fault Detection Reference Design
TIDA-00289 The TI Design TIDA-00289 proposes to integrate current control and plunger movement detection into the solenoid coil. Various applications in the field of industrial automation and material processing will benefit from up-to 70% reduced power consumption, accelerated process time, greatly simplified (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
36-60Vin, 350W Slow Drain Modulation Power Converter with PSFB ZTE and HSHB Reference Design
PMP7246 This is a 350W High Speed Full Bridge Phase Shift ZVT Synchronous Rectification DC/DC reference design. It is built for telecom applications to supply a RF Power Amplifier stage. The design is utilizing UCC28950 voltage mode forward and average current limitation backward converter (two quadrant (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
9V - 32V input to -28V/1.5A negative output buck-boost LED current regulator
PMP6867 — This reference design uses the TPS40170 sync buck controller in a buck-boost converter to regulate the current in a series string of 6 to 8 LEDs (-28V) at up to 1.5A. Efficiency is greater than 93%. The output current can be adjusted with an external control voltage.

CAD/CAE symbols

Package Pins Download
PDIP (P) 8 View options
SOIC (D) 8 View options
SOT-23 (DBV) 5 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos