Product details

Function Type-C Type PD controller Power role DRP, Sink, Source Alternate mode Yes External power path control GPIO, I2C Data role DFP, DRD, UFP Internal power path 20 V 5 A Rating Catalog Dead battery support Yes Operating temperature range (C) -10 to 75
Function Type-C Type PD controller Power role DRP, Sink, Source Alternate mode Yes External power path control GPIO, I2C Data role DFP, DRD, UFP Internal power path 20 V 5 A Rating Catalog Dead battery support Yes Operating temperature range (C) -10 to 75
VQFN (RSH) 56 49 mm² 7 x 7
  • This device is certified by the USB-IF for PD3.0
    • PD3.0 silicon is required for certification of new USB PD designs
      • TID#: 1067
    • Article on PD2.0 vs. PD3.0
  • TPS65987D is a fully configurable USB PD device controller:
    • Ability to source and sink up to 20 V/5 A
    • Alternate mode support
      • DisplayPort
    • Control for external DC/DC supplies, high speed data muxes, and other peripheral devices through either GPIO or I2C
    • GUI tool to easily configure TPS65987D for various applications: TPS65988X-CONFIG
    • Power management
      • Power supply from 3.3 V or VBUS source
      • 3.3-V LDO output for dead battery support

    • For a more extensive selection guide and getting started information, please refer to www.ti.com/usb-c and E2E guide
  • Integrated fully managed power paths:
    • Two integrated 20-V, 5-A, 25-mΩ source or sink load switch
    • UL 2367 cert #: 20190107-E169910
    • IEC 62368-1 cert #: US-34617-UL
  • Integrated robust power path protection
    • Integrated reverse current protection, undervoltage protection, overvoltage protection, and slew rate control for both 20-V/5-A power paths when configured to Sink
    • Integrated undervoltage protection, overvoltage protection, and current limiting for inrush current protection for both 20-V/5-A power paths when configured to Source
  • USB Type-C Power Delivery (PD) controller
    • 13 configurable GPIOs
    • BC1.2 charging support
    • USB PD 3.0 certified
    • USB Type-C specification certified
    • Cable attach and orientation detection
    • Integrated VCONN switch
    • Physical layer and policy engine
    • 3.3-V LDO output for dead battery support
    • Power supply from 3.3 V or VBUS source
    • 1 I2C primary or secondary port
    • 1 I2C primary only port
    • 1 I2C secondary only port
  • This device is certified by the USB-IF for PD3.0
    • PD3.0 silicon is required for certification of new USB PD designs
      • TID#: 1067
    • Article on PD2.0 vs. PD3.0
  • TPS65987D is a fully configurable USB PD device controller:
    • Ability to source and sink up to 20 V/5 A
    • Alternate mode support
      • DisplayPort
    • Control for external DC/DC supplies, high speed data muxes, and other peripheral devices through either GPIO or I2C
    • GUI tool to easily configure TPS65987D for various applications: TPS65988X-CONFIG
    • Power management
      • Power supply from 3.3 V or VBUS source
      • 3.3-V LDO output for dead battery support

    • For a more extensive selection guide and getting started information, please refer to www.ti.com/usb-c and E2E guide
  • Integrated fully managed power paths:
    • Two integrated 20-V, 5-A, 25-mΩ source or sink load switch
    • UL 2367 cert #: 20190107-E169910
    • IEC 62368-1 cert #: US-34617-UL
  • Integrated robust power path protection
    • Integrated reverse current protection, undervoltage protection, overvoltage protection, and slew rate control for both 20-V/5-A power paths when configured to Sink
    • Integrated undervoltage protection, overvoltage protection, and current limiting for inrush current protection for both 20-V/5-A power paths when configured to Source
  • USB Type-C Power Delivery (PD) controller
    • 13 configurable GPIOs
    • BC1.2 charging support
    • USB PD 3.0 certified
    • USB Type-C specification certified
    • Cable attach and orientation detection
    • Integrated VCONN switch
    • Physical layer and policy engine
    • 3.3-V LDO output for dead battery support
    • Power supply from 3.3 V or VBUS source
    • 1 I2C primary or secondary port
    • 1 I2C primary only port
    • 1 I2C secondary only port

The TPS65987D is a stand-alone USB Type-C and Power Delivery (PD) controller providing cable plug and orientation detection for a single USB Type-C connector. Upon cable detection, the TPS65987D communicates on the CC wire using the USB PD protocol. When cable detection and USB PD negotiation are complete, the TPS65987D enables the appropriate power path and configures alternate mode settings for external multiplexers.

The TPS65987D is a stand-alone USB Type-C and Power Delivery (PD) controller providing cable plug and orientation detection for a single USB Type-C connector. Upon cable detection, the TPS65987D communicates on the CC wire using the USB PD protocol. When cable detection and USB PD negotiation are complete, the TPS65987D enables the appropriate power path and configures alternate mode settings for external multiplexers.

Download

Similar products you might be interested in

open-in-new Compare products
Similar functionality to the compared device.
TPS25750 ACTIVE Highly integrated USB Type-C® and USB PD controller with pre-configured GUI TPS25750 is optimized for power-only USB Type-C PD applications

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 23
Type Title Date
* Data sheet TPS65987D USB Type-C® and USB PD Controller with Integrated Source and Sink Power Path Supporting USB3 and Alternate Mode datasheet (Rev. C) 05 Aug 2021
Application note TPS65987D GPIO Events (Rev. A) 26 Jan 2021
Application note Hardware Design Guideline for TPS65987 and TPS65988 USB Power Delivery (Rev. C) 08 Jan 2021
User guide TPS6598x Application Customization Tool (Rev. C) 14 Sep 2020
Technical article Ease power-supply design for USB PD applications with buck-boost converters 09 Jul 2020
Application note USB Type C Power Delivery Source with TPS65987 and TPS55288 06 Mar 2020
Application note TPS65988 BC1.2 Implementation Guideline (Rev. A) 16 Jan 2020
Application note USB Power Delivery - Compliance Tests (Rev. A) 25 Sep 2019
White paper USB Type-C and USB power delivery power path design considerations (Rev. A) 12 Jun 2019
Application note TPS65987/8 Power and Data Role Swaps 10 Jun 2019
Application note TPS6598x Dead Battery Application Note 20 Dec 2018
Application note TPS65987 and TPS65988 SPI Flash Firmware Update Over I2C (Rev. A) 17 Oct 2018
Technical article USB Type-C™ and USB Power Delivery – no assembly required 04 Oct 2018
Application note TPS65987D and TPS65988 User Alternate Modes (Rev. A) 14 Sep 2018
User guide TPS65987DDH and TPS65988DH Host Interface Technical Reference Manual (Rev. B) 14 Sep 2018
User guide USB-C-PD-DUO-EVM User's Guide 27 Aug 2018
White paper Fast role swap power architecture white paper 20 Aug 2018
Application note TPS6598x DisplayPort Alternate Mode (Rev. B) 31 Jul 2018
Application note TPS65988 and TPS65987D PD3.0 Fast Role Swap 30 Jul 2018
Application note TPS65987/88 I2C Master Programming 25 Jul 2018
Design guide Power DUO Sink 200 W USB-C PD Reference Design 12 Jul 2018
Design guide Power DUO Source 200 W USB-C PD Reference Design 12 Jul 2018
Application note TPS65987D, TPS65988 Power Path Performance and Protection 30 May 2018

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS65987EVM — TPS65987 Single port USB Type-C and power delivery (PD) controller evaluation module

The TPS65987EVM design is targeted for USB Type-C and Power Delivery (PD) Applications. This EVM features integrated Power Paths of TPS65987D with TPD6S300A Protection and a variable DC/DC architecture to optimize board layout and minimize BOM cost. In addition, when paired with the (...)
In stock
Limit: 5
Evaluation board

USB-C-PD-DUO-EVM — Power DUO source and sink evaluation module

The USB-C-PD-DUO-EVM is a complete USB PD Source and Sink reference design that allows users to select their USB PD source voltage or USB PD sink voltage.

In stock
Limit: 5
IDE, configuration, compiler or debugger

TPS6598X-CONFIG — TPS6598x configuration tool

What you need to get started:

Step 1: Watch the TPS6598X GUI tool videos
Step 2: Download the TPS6598X GUI
Step 3: Order the USB-C-PD-DUO-EVM and read the user's guide
Step 4: Watch the EVM Tutorial


The TPS6598x configuration tool assists in the design phase by providing a GUI interface to configure (...)

Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Gerber file

TPS65987EVM Design Files

SLVC770.ZIP (3868 KB)
Reference designs

PMP40801 — Docking USB Type-C® power delivery reference design for personal electronics applications

This reference design is the USB Type-C® power delivery for personal electronics or automotive applications, where a USB power delivery (USB PD) supported buck-boost converter is used to generate a wide range output voltage. The TPS55288 is a synchronous buck-boost converter used to convert 12-V (...)
Reference designs

TIDA-050014 — Power DUO Sink 200W USB-C PD Reference Design

The Power DUO Sink 200W USB-C PD Reference Design is a complete USB PD Sink reference design that allows users to select their USB PD sink voltage.
Reference designs

TIDA-050012 — Power DUO Source 200W USB-C PD Reference Design

The Power DUO Source 200 W USB-C PD Reference Design is a complete USB PD Source reference design that allows users to select their USB PD source voltage.
Reference designs

TIDA-010047 — 22-W/in3, 93.1% peak efficiency, 100-W USB-PD 3.0 AC/DC adapter reference design with Si MOSFET

This fully-tested reference design is a high-efficiency, high-power-density, AC/DC adapter solution with a wide input voltage range (100- to 240-V AC) for laptop adapters and smartphone charger applications. This design consists of a front-end transition-mode (TM) power factor correction (PFC) (...)
Package Pins Download
VQFN (RSH) 56 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos