LM61460

AKTIV

Synchroner Abwärtswandler mit geringem EMI-Wert, 3 bis 36 V, 6 A

Jetzt bestellen

Datenblatt

document-pdfAcrobat LM61460 3-V to 36-V, 6-A, Low EMI Synchronous Step-Down Converter datasheet (Rev. D) (Englisch) PDF | HTML

LM61460

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Rating

Catalog

Topology

Buck

Iout (max) (A)

6

Vin (max) (V)

36

Vin (min) (V)

3

Vout (max) (V)

34

Vout (min) (V)

1

Features

Enable, Frequency synchronization, Light Load Efficiency, Over Current Protection, Power good, Soft Start Adjustable, Synchronous Rectification, Wettable flanks package

EMI features

Low parasitic Hotrod packaging

Control mode

current mode

Operating temperature range (°C)

-40 to 150

Iq (typ) (A)

0.000009

Duty cycle (max) (%)

98

TI functional safety category

Functional Safety-Capable

Rating

Catalog

Topology

Buck

Iout (max) (A)

6

Vin (max) (V)

36

Vin (min) (V)

3

Vout (max) (V)

34

Vout (min) (V)

1

Features

Enable, Frequency synchronization, Light Load Efficiency, Over Current Protection, Power good, Soft Start Adjustable, Synchronous Rectification, Wettable flanks package

EMI features

Low parasitic Hotrod packaging

Control mode

current mode

Operating temperature range (°C)

-40 to 150

Iq (typ) (A)

0.000009

Duty cycle (max) (%)

98

TI functional safety category

Functional Safety-Capable

VQFN-HR (RJR)

14

14 mm² (4 mm × 3.5 mm)

Functional Safety-Capable
- Documentation available to aid functional safety system design
Optimized for ultra low EMI requirements
- Hotrod™ package and parallel input path minimize switch node ringing
- Adjustable SW node rise time
Designed for reliable and rugged applications
- Supports 42-V transients
- ±1% total output regulation accuracy
- V_OUT adjustable from 1 V to 95% of V_IN
- 0.4-V dropout with 4-A load (typical)
- Protection features: thermal shutdown, input undervoltage lockout, cycle-by-cycle current limit, hiccup short-citcuit protection
High efficiency power conversion at all loads
- 7-µA no load current at 13.5 V_IN, 3.3 V_OUT
- 83% PFM efficiency at 1-mA, 13.5 V_IN, 5 V_OUT
- Low MOSFET ON resistance
  - R_{DS_ON_HS} = 41 mΩ (typical)
  - R_{DS_ON_LS} = 21 mΩ (typical)
- External bias option for improved efficiency
Suitable for scalable power supplies
- Pin compatible with:
  - LM61440-Q1 (36 V, 4 A, adjustable f_SW)
  - LM61440 (36 V, 4 A, adjustable f_SW)
  - LMQ61460 (36 V, 6 A, internal caps)
Use TPSM63606 module for faster time to market

Functional Safety-Capable
- Documentation available to aid functional safety system design
Optimized for ultra low EMI requirements
- Hotrod™ package and parallel input path minimize switch node ringing
- Adjustable SW node rise time
Designed for reliable and rugged applications
- Supports 42-V transients
- ±1% total output regulation accuracy
- V_OUT adjustable from 1 V to 95% of V_IN
- 0.4-V dropout with 4-A load (typical)
- Protection features: thermal shutdown, input undervoltage lockout, cycle-by-cycle current limit, hiccup short-citcuit protection
High efficiency power conversion at all loads
- 7-µA no load current at 13.5 V_IN, 3.3 V_OUT
- 83% PFM efficiency at 1-mA, 13.5 V_IN, 5 V_OUT
- Low MOSFET ON resistance
  - R_{DS_ON_HS} = 41 mΩ (typical)
  - R_{DS_ON_LS} = 21 mΩ (typical)
- External bias option for improved efficiency
Suitable for scalable power supplies
- Pin compatible with:
  - LM61440-Q1 (36 V, 4 A, adjustable f_SW)
  - LM61440 (36 V, 4 A, adjustable f_SW)
  - LMQ61460 (36 V, 6 A, internal caps)
Use TPSM63606 module for faster time to market

The LM61460 is a high-performance, DC-DC synchronous step-down converter. With integrated high-side and low-side MOSFETs, up to 6 A of output current is delivered over a wide input range of 3.0 V to 36 V; tolerant of 42 V, easing input surge protection design. The LM61460 implements soft recovery from dropout eliminating overshoot on the output.

The LM61460 is specifically designed for minimal EMI. The device incorporates adjustable SW node rise time, low-EMI VQFN-HR package featuring low switch node ringing, and optimized pinout for ease of use. The switching frequency can be set or synchronized between 200 kHz and 2.2 MHz to avoid noise sensitive frequency bands. In addition the frequency can be selected for improved efficiency at low operating frequency or smaller solution size at high operating frequency.

Auto-mode enables frequency foldback when operating at light loads, allowing an unloaded current consumption of only 7 µA (typical) and high light load efficiency. Seamless transition between PWM and PFM modes, along with very low MOSFET ON resistances and an external bias input, ensures exceptional efficiency across the entire load range.

Electrical characteristics are specified over a junction temperature range of –40°C to +150°C. Find additional resources in the Related Documentation.

The LM61460 is a high-performance, DC-DC synchronous step-down converter. With integrated high-side and low-side MOSFETs, up to 6 A of output current is delivered over a wide input range of 3.0 V to 36 V; tolerant of 42 V, easing input surge protection design. The LM61460 implements soft recovery from dropout eliminating overshoot on the output.

The LM61460 is specifically designed for minimal EMI. The device incorporates adjustable SW node rise time, low-EMI VQFN-HR package featuring low switch node ringing, and optimized pinout for ease of use. The switching frequency can be set or synchronized between 200 kHz and 2.2 MHz to avoid noise sensitive frequency bands. In addition the frequency can be selected for improved efficiency at low operating frequency or smaller solution size at high operating frequency.

Auto-mode enables frequency foldback when operating at light loads, allowing an unloaded current consumption of only 7 µA (typical) and high light load efficiency. Seamless transition between PWM and PFM modes, along with very low MOSFET ON resistances and an external bias input, ensures exceptional efficiency across the entire load range.

Electrical characteristics are specified over a junction temperature range of –40°C to +150°C. Find additional resources in the Related Documentation.

filter

Andere DC/DC-Wandler suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 6

Top-Dokumentation	Typ	Titel	Format-Optionen	Datum
*	Datenblatt	LM61460 3-V to 36-V, 6-A, Low EMI Synchronous Step-Down Converter datasheet (Rev. D)	PDF \| HTML	28.07.2022
	Anwendungshinweis	How to Implement a Simple Constant Current Regulation Scheme to a PCM Based Buck	PDF \| HTML	16.08.2023
	Anwendungshinweis	Using the LM61460-Q1 and LM61495-Q1 in USB Type-C Applications	PDF \| HTML	15.12.2021
	Auswahlhilfe	Buck Converter Quick Reference Guide (Rev. B)		08.04.2021
	Informationen zur funktionalen Sicherheit	LM61x0 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA	PDF \| HTML	08.10.2020
	Technischer Artikel	Keeping the brain cool: how to use high-power DC/DCs in single-board computer desi	PDF \| HTML	28.02.2020

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

LM61460EVM — Evaluierungsmodul für 36-V-, 6-A-, 5-V-Synchron-Abwärtswandler mit niedrigem EMI-Wert, 400 kHz

Das LM61460-Evaluierungsmodul (EVM) ist eine vollständig bestückte und getestete Platine zur Evaluierung des Synchron-Abwärtswandlers LM61460. Der LM61460 bietet einen hervorragenden Wirkungsgrad, einen niedrigen Ruhestrom und geringe EMI-Werte bei einer kleinen Lösungsgröße.

Benutzerhandbuch: PDF | HTML