Startseite Schnittstelle RS-485- & RS-422-Transceiver
Startseite
Schnittstelle
RS-485- & RS-422-Transceiver

SN75LBC184

AKTIV

Differenzieller Transceiver für Transientenspannungsunterdrückung

Jetzt bestellen
Datenblatt

SN75LBC184

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Number of receivers 1 Number of transmitters 1 Duplex Half Supply voltage (nom) (V) 5 Signaling rate (max) (Mbps) 0.25 IEC 61000-4-2 contact (±V) 30000 Fault protection (V) -15 to 15 Common-mode range (V) -7 to 12 Number of nodes 128 Features IEC ESD protection, Surge protection Isolated No Supply current (max) (µA) 25000 Rating Catalog Operating temperature range (°C) 0 to 70
Number of receivers 1 Number of transmitters 1 Duplex Half Supply voltage (nom) (V) 5 Signaling rate (max) (Mbps) 0.25 IEC 61000-4-2 contact (±V) 30000 Fault protection (V) -15 to 15 Common-mode range (V) -7 to 12 Number of nodes 128 Features IEC ESD protection, Surge protection Isolated No Supply current (max) (µA) 25000 Rating Catalog Operating temperature range (°C) 0 to 70
PDIP (P) 8 92.5083 mm² 9.81 x 9.43 SOIC (D) 8 29.4 mm² 4.9 x 6
  • Integrated transient voltage suppression
  • ESD Protection for bus terminals exceeds: ±30kV IEC 61000-4-2, contact discharge ±30kV IEC 61000-4-2, Air-gap discharge ±15kV EIA/JEDEC Human body model
  • Circuit damage protection of 400W peak (typical) per IEC 61000-4-5
  • Controlled driver output-voltage slew rates allow longer cable stub lengths
  • 250kbps in Electrically noisy environments
  • Open-circuit fail-safe receiver design
  • 1/4 Unit load allows for 128 devices connected on bus
  • Thermal shutdown protection
  • Power-up and power-down glitch protection
  • Each transceiver meets or exceeds the requirements of TIA/EIA-485 (RS-485) and ISO/IEC 8482:1993(E) standards
  • Low disabled supply current 300µA maximum
  • Pin compatible with SN75176
  • Integrated transient voltage suppression
  • ESD Protection for bus terminals exceeds: ±30kV IEC 61000-4-2, contact discharge ±30kV IEC 61000-4-2, Air-gap discharge ±15kV EIA/JEDEC Human body model
  • Circuit damage protection of 400W peak (typical) per IEC 61000-4-5
  • Controlled driver output-voltage slew rates allow longer cable stub lengths
  • 250kbps in Electrically noisy environments
  • Open-circuit fail-safe receiver design
  • 1/4 Unit load allows for 128 devices connected on bus
  • Thermal shutdown protection
  • Power-up and power-down glitch protection
  • Each transceiver meets or exceeds the requirements of TIA/EIA-485 (RS-485) and ISO/IEC 8482:1993(E) standards
  • Low disabled supply current 300µA maximum
  • Pin compatible with SN75176

The SN75LBC184 and SN65LBC184 devices are differential data line transceivers in the trade-standard footprint of the SN75176 with built-in protection against high-energy noise transients. This feature provides a substantial increase in reliability for better immunity to noise transients coupled to the data cable over most existing devices. Use of these circuits provides a reliable low-cost direct-coupled (with no isolation transformer) data line interface without requiring any external components.

The SN75LBC184 and SN65LBC184 can withstand overvoltage transients of 400W peak (typical). The conventional combination wave called out in IEC 61000-4-5 simulates the overvoltage transient and models a unidirectional surge caused by overvoltages from switching and secondary lightning transients.

The SN75LBC184 and SN65LBC184 devices are differential data line transceivers in the trade-standard footprint of the SN75176 with built-in protection against high-energy noise transients. This feature provides a substantial increase in reliability for better immunity to noise transients coupled to the data cable over most existing devices. Use of these circuits provides a reliable low-cost direct-coupled (with no isolation transformer) data line interface without requiring any external components.

The SN75LBC184 and SN65LBC184 can withstand overvoltage transients of 400W peak (typical). The conventional combination wave called out in IEC 61000-4-5 simulates the overvoltage transient and models a unidirectional surge caused by overvoltages from switching and secondary lightning transients.
filter Andere RS-485- & RS-422-Transceiver suchen
Herunterladen

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Selbe Funktionalität wie der verglichene Baustein bei gleicher Anschlussbelegung
THVD1419 AKTIV RS-485-Transceiver, 3,3 bis 5 V, mit Überspannungsschutz Pin-to-pin device that offers integrated IEC surge (2.5-kV), IEC ESD protection (8-kV contact discharge), IEC EFT (4-kV noise immunity), and extended common vol

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet SNx5LBC184 Differential Transceiver With Transient Voltage Suppression datasheet (Rev. J) PDF | HTML 24 Jul 2024

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​