Home Energiemanagement Lastschalter
Home
Energiemanagement
Lastschalter

TPS22930A

AKTIV

Lastschalter, 5,5 V, 2 A, 35 mΩ

Jetzt bestellen
Datenblatt

TPS22930A

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Product type Load switches Current limit type None Vin (max) (V) 5.5 Vin (min) (V) 1.4 Imax (A) 2 Rating Catalog Features Inrush current control, Reverse current blocking, Reverse current protection, Under voltage lock out Number of channels 1 Quiescent current (Iq) (typ) (µA) 2.1 Shutdown current (ISD) (typ) (µA) 0.2 Soft start Fixed Rise Time Ron (typ) (mΩ) 36 Operating temperature range (°C) -40 to 85
Product type Load switches Current limit type None Vin (max) (V) 5.5 Vin (min) (V) 1.4 Imax (A) 2 Rating Catalog Features Inrush current control, Reverse current blocking, Reverse current protection, Under voltage lock out Number of channels 1 Quiescent current (Iq) (typ) (µA) 2.1 Shutdown current (ISD) (typ) (µA) 0.2 Soft start Fixed Rise Time Ron (typ) (mΩ) 36 Operating temperature range (°C) -40 to 85
DSBGA (YZV) 4 1.5625 mm² (— mm × — mm)
  • Integrated single channel load switch
  • Ultra small four terminal wafer-chip-scale package (nominal dimensions shown see addendum for details)
    • 0.9 mm × 0.9 mm, 0.5 mm pitch, 0.5-mm height (YZV)
  • Input voltage range: 1.4 V to 5.5 V
  • Ultra low RON resistance
    • RON = 35 mΩ at VIN = 5 V
    • RON = 36 mΩ at VIN = 3.6 V
    • RON = 49 mΩ at VIN = 1.8 V
  • 2-A maximum continuous switch current
  • Low quiescent current (< 3 µA)
  • Low control input threshold enables use of 1.2-V/1.8-V/2.5-V/3.3-V logic
  • Controlled slew rate
  • Under voltage lockout
  • Reverse current protection when disabled
  • Integrated single channel load switch
  • Ultra small four terminal wafer-chip-scale package (nominal dimensions shown see addendum for details)
    • 0.9 mm × 0.9 mm, 0.5 mm pitch, 0.5-mm height (YZV)
  • Input voltage range: 1.4 V to 5.5 V
  • Ultra low RON resistance
    • RON = 35 mΩ at VIN = 5 V
    • RON = 36 mΩ at VIN = 3.6 V
    • RON = 49 mΩ at VIN = 1.8 V
  • 2-A maximum continuous switch current
  • Low quiescent current (< 3 µA)
  • Low control input threshold enables use of 1.2-V/1.8-V/2.5-V/3.3-V logic
  • Controlled slew rate
  • Under voltage lockout
  • Reverse current protection when disabled

The TPS22930 is a small, low RON load switch with controlled turn on. The device contains a P-channel MOSFET that can operate over an input voltage range of 1.4 V to 5.5 V. The switch is controlled by an on/off input (ON), which is capable of interfacing directly with low-voltage control signals. The TPS22930 is active high enable.

The TPS22930 device provides circuit breaker functionality by disabling the body diode during reverse voltage (also known as reverse current) situations. Reverse current protection is active only when the power-switch is disabled (off). The device disengages the body diode when the output voltage (VOUT) is driven higher than the input (VIN) to stop the flow of current towards the input side of the switch. Additionally, under-voltage lockout (UVLO) protection turns the switch off if the input voltage is too low.

The slew rate of the device is internally controlled in order to avoid inrush current.

The TPS22930 is available in an ultra-small, space-saving 4-pin CSP package and is characterized for operation over the free-air temperature range of –40°C to 85°C.

The TPS22930 is a small, low RON load switch with controlled turn on. The device contains a P-channel MOSFET that can operate over an input voltage range of 1.4 V to 5.5 V. The switch is controlled by an on/off input (ON), which is capable of interfacing directly with low-voltage control signals. The TPS22930 is active high enable.

The TPS22930 device provides circuit breaker functionality by disabling the body diode during reverse voltage (also known as reverse current) situations. Reverse current protection is active only when the power-switch is disabled (off). The device disengages the body diode when the output voltage (VOUT) is driven higher than the input (VIN) to stop the flow of current towards the input side of the switch. Additionally, under-voltage lockout (UVLO) protection turns the switch off if the input voltage is too low.

The slew rate of the device is internally controlled in order to avoid inrush current.

The TPS22930 is available in an ultra-small, space-saving 4-pin CSP package and is characterized for operation over the free-air temperature range of –40°C to 85°C.
filter Andere Lastschalter suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung.
TPS22915 AKTIV 5,5-V-, 2-A-, 39-mΩ-Lastschalter mit Ausgangsentladung This product is A small (0.8mm x 0.8mm), low Ron (37mohm), 2-A load switch.

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 6
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TPS22930 Ultra Small, Low On-Resistance Load Switch with Controlled Turn-On datasheet (Rev. D) PDF | HTML 01.07.2021
Anwendungshinweis Load Switch Thermal Considerations (Rev. A) 11.10.2018
Anwendungshinweis Basics of Load Switches (Rev. A) 05.09.2018
Anwendungshinweis Selecting a Load Switch to Replace a Discrete Solution 30.04.2017
Anwendungshinweis Timing of Load Switches 27.04.2017
Anwendungshinweis Managing Inrush Current (Rev. A) 28.05.2015

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS22930AEVM-027 — TPS22930A Lastschalter-Evaluierungsmodul

The Texas Instruments TPS22930AEVM-027 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TPS22930A 2A load switch with reverse-current protection. The EVM allows the user to connect power to and control the Ultra-Small CSP-4 package load switch. Parameters such as (...)

Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
DSBGA (YZV) 4 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos