The TCAN5102-Q1 is a Control Area Network (CAN) Flexible Data (FD) Light responder device compatible with CiA 604-1 and ISO 11898-1:2024, capable of supporting up to 5Mbps data rate when a dedicated CAN FD light commander is used. The device is designed to support CAN FD light responder node applications in a commander - responder architecture which does not require a responder node processor. All control to the responder node is through the CAN bus from the commander node processor which eliminates the need for responder node processor and software.
The device receives data and/or commands from a CAN FD light commander node which translates these to either Serial Peripheral Interface (SPI) controller, UART controller, I2C controller, and/or GPIO pins communication to the device and/or peripheral devices the TCAN5102-Q1 is controlling. PWM output channels also support trapezoidal ramp profiles in hardware for controlling stepper motors. Ramping of duty cycle or frequency is possible. No external crystal or clock is required. The device controls the external TCAN1162x-Q1, TCAN1043A-Q1 or TCAN1463A-Q1 CAN FD (SIC) transceivers for system level flexibility. The device relys upon the CAN FD transceiver/SBC to control the node power and communicate a wake up signal to the TCAN5102-Q1 by latching the CAN RXD (CRXD) pin low.
| Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | TCAN5102-Q1 Automotive Self-supplied CAN FD Light Responder to SPI, UART, or I2 C Controller datasheet (Rev. A) | PDF | HTML | 29 oct 2025 |
| Certificate | TCAN5102EVM EU Declaration of Conformity (DoC) | 10 oct 2025 |
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
The TCAN5102-Q1 EVM provides users with the ability to evaluate TCAN5102-Q1 CAN FD (Controller Area Network with Flexible Data Rate) Light Responder. The EVM is configurable for use with both 8-pin and 14-pin CAN transceiver families by populating the transceiver and setting the appropriate jumpers (...)
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| HVSSOP (DGQ) | 20 | Ultra Librarian |
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.